the regular send shortcut is control+Enter. the shift enables "archive thread".
there is no configuration option, you'll always get the button, but only for
reply/forward, not for new compose.
we may do "send and move thread to thrash", but let's wait until people want it.
for github issue #135 by mattfbacon
the stuttering was introduced to make the same type name declared in multiple
packages, and used in the admin sherpa api, unique. with sherpadoc's new
rename, we can make them unique when generating the api definition/docs, and
the Go code can use nicer names.
for dmarc reporting address, tls reporting address, mtasts policy, dkim keys/selectors.
should make it easier for webadmin-using admins to discover these settings.
the webadmin interface is now on par with functionality you would set through
the configuration file, let's keep it that way.
this simplifies some of the code that makes modifications to the config file. a
few protected functions can make changes to the dynamic config, which webadmin
can use. instead of having separate functions in mox-/admin.go for each type of
change.
this also exports the parsed full dynamic config to webadmin, so we need fewer
functions for specific config fields too.
when sending a message with bcc's, prepend the bcc header to the message we
store in the sent folder. still not in the message we send to the recipients.
the cookies are set with a specific path, because the webadmin, webaccount and
webmail cookies can be on the same domain (this is the default). if the reverse
proxy strips the path while forwarding, the browser won't set the cookie and
the login attempt will fail.
based on github issue #151 from naturalethic
time.Now() returns a timestamp with timezone Local. if you marshal & unmarshal
it again, it'll get the Local timezone again. unless the local timezone is UTC.
then it will get the UTC timezone. the same time.Time but with explicit UTC
timezone vs explicit UTC-as-Local timezone are not the same when comparing with
==. so comparison should be done with time.Time.Equal, or comparison should be
done after having called .Local() on parsed timestamps (so the explicit UTC
timezone gets converted to the UTC-as-Local timezone). somewhat surprising that
time.Local isn't the same as time.UTC if TZ=/TZ=UTC. there are warnings
throughout the time package about handling of UTC.
for applications to compose/send messages, receive delivery feedback, and
maintain suppression lists.
this is an alternative to applications using a library to compose messages,
submitting those messages using smtp, and monitoring a mailbox with imap for
DSNs, which can be processed into the equivalent of suppression lists. but you
need to know about all these standards/protocols and find libraries. by using
the webapi & webhooks, you just need a http & json library.
unfortunately, there is no standard for these kinds of api, so mox has made up
yet another one...
matching incoming DSNs about deliveries to original outgoing messages requires
keeping history of "retired" messages (delivered from the queue, either
successfully or failed). this can be enabled per account. history is also
useful for debugging deliveries. we now also keep history of each delivery
attempt, accessible while still in the queue, and kept when a message is
retired. the queue webadmin pages now also have pagination, to show potentially
large history.
a queue of webhook calls is now managed too. failures are retried similar to
message deliveries. webhooks can also be saved to the retired list after
completing. also configurable per account.
messages can be sent with a "unique smtp mail from" address. this can only be
used if the domain is configured with a localpart catchall separator such as
"+". when enabled, a queued message gets assigned a random "fromid", which is
added after the separator when sending. when DSNs are returned, they can be
related to previously sent messages based on this fromid. in the future, we can
implement matching on the "envid" used in the smtp dsn extension, or on the
"message-id" of the message. using a fromid can be triggered by authenticating
with a login email address that is configured as enabling fromid.
suppression lists are automatically managed per account. if a delivery attempt
results in certain smtp errors, the destination address is added to the
suppression list. future messages queued for that recipient will immediately
fail without a delivery attempt. suppression lists protect your mail server
reputation.
submitted messages can carry "extra" data through the queue and webhooks for
outgoing deliveries. through webapi as a json object, through smtp submission
as message headers of the form "x-mox-extra-<key>: value".
to make it easy to test webapi/webhooks locally, the "localserve" mode actually
puts messages in the queue. when it's time to deliver, it still won't do a full
delivery attempt, but just delivers to the sender account. unless the recipient
address has a special form, simulating a failure to deliver.
admins now have more control over the queue. "hold rules" can be added to mark
newly queued messages as "on hold", pausing delivery. rules can be about
certain sender or recipient domains/addresses, or apply to all messages pausing
the entire queue. also useful for (local) testing.
new config options have been introduced. they are editable through the admin
and/or account web interfaces.
the webapi http endpoints are enabled for newly generated configs with the
quickstart, and in localserve. existing configurations must explicitly enable
the webapi in mox.conf.
gopherwatch.org was created to dogfood this code. it initially used just the
compose/smtpclient/imapclient mox packages to send messages and process
delivery feedback. it will get a config option to use the mox webapi/webhooks
instead. the gopherwatch code to use webapi/webhook is smaller and simpler, and
developing that shaped development of the mox webapi/webhooks.
for issue #31 by cuu508
in the precis password change before the previous release, the password used in
fuzzing wasn't correct, triggering sleeps due to botched protocols often, which
made the tests run much longer.
typescript now knows the full types, not just "any" for account config.
inline structs previously in config.Account are given their own type definition
so sherpa can generate types.
also update to latest sherpa lib that knows about time.Duration, to be used soon.
mox was already giving another try for received errors after the
`HELO`/`EHLO` command. Now mox do the same for received errors when
trying to deliver the message to the remote SMTP server.
This should help to deliver messages to SMTP server that rejects
incoming messages because of bad ipv4 or ipv6 configuration (for example
for servers checking reverse DNS records). mox will now try to deliver
messages on both ip family instead before considering the error as
permanent.
fix#149
The `TransportDirect` transport allows to tweak outgoing SMTP
connections to remote servers. Currently, it only allows to select
network IP family (ipv4, ipv6 or both).
For example, to disable ipv6 for all outgoing SMTP connections:
- add these lines in mox.conf to create a new transport named
"disableipv6":
```
Transports:
disableipv6:
Direct:
DisableIpv6: true
```
- then add these lines in domains.conf to use this transport:
```
Routes:
-
Transport: disableipv6
```
fix#149
because let's encrypt won't create an account for contact addresses with non-ascii characters.
we'll get an error message like:
400 urn:ietf:params:acme:error:invalidContact: Error creating new account :: contact email [\"mailto:...\"] contains non-ASCII characters
found & reported by arnt, thanks!
despite the name, it doesn't actually check for valid email addresses:
it doesn't allow non-ascii localparts, accepts various invalid localparts, and
rejects various valid localparts. no point in using it.
we include the username in session cookie values. but cookie values must be ascii-only, go's net/http's drops bad values. the typical solution is to querystring-encode/decode the cookie values, which we'll now do.
problem found by arnt, thanks for reporting!
don't treat just any number from filename as timestamp. require it has 2 dots.
prevents filenames with just a number as being seen as a timestamp, like when
you import files from a mox accounts msgs directory.
more useful than the time.Time zero file in case the maildir filename isn't
properly formed with a timestamp. this is not too uncommon when people
reconstruct maildirs from other sources of message files to then import the
maildir.
based on message from abdul h
Squashed commit of the following:
commit 11c25d727f
Author: Laurent Meunier <laurent@deltalima.net>
Date: Sun Mar 31 12:37:09 2024 +0200
Fix style issue
commit c075a8cd8b
Author: Laurent Meunier <laurent@deltalima.net>
Date: Sun Mar 31 12:35:04 2024 +0200
Also check smtputf8 for submitted messages or when in pedantic mode
commit c02328f881
Author: Laurent Meunier <laurent@deltalima.net>
Date: Sun Mar 31 12:33:20 2024 +0200
Calls to `newParser` should use `c.smtputf8`
commit a0bbd13afc
Author: Laurent Meunier <laurent@deltalima.net>
Date: Sun Mar 31 12:32:12 2024 +0200
Improve SMTPUTF8 tests
commit 08735690f3
Author: Laurent Meunier <laurent@deltalima.net>
Date: Sat Mar 30 17:22:33 2024 +0100
do earlier smtputf8-check
commit 3484651691
Author: Laurent Meunier <laurent@deltalima.net>
Date: Thu Mar 28 17:47:11 2024 +0100
do not require the SMTPUTF8 extension when not needed
fix#145
