this is a typical case if you made an alias to test how it works, with your
account. we may have to make this behaviour optional in the future.
for issue #220 by wneessen, thanks for reporting!
before, we would just say "session expired". now we say "session expired (after
12 hours inactivity)" (for admin) or "session expired (after 24 hours
inactivity)" for account/webmail. for unknown sessions in the admin interface,
we also explain that server restarts and 10 more new sessions can be the
reason.
for issue #202 by ally9335
it's the responsibility of the sender to use unique fromid's.
we do check if that's the case, and return an error if not.
also make it more clear that "unique smtp mail from addresses" map to the
"FromIDLoginAddresses" account config field.
based on feedback from cuu508 for #31, thanks!
since email addresses can contain multiple consecutive spaces.
this is a valid address: " "@localhost
and this is a different valid address: " "@localhost
webmail still todo
the members must currently all be addresses of local accounts.
a message sent to an alias is accepted if at least one of the members accepts
it. if no members accepts it (e.g. due to bad reputation of sender), the
message is rejected.
if a message is submitted to both an alias addresses and to recipients that are
members of the alias in an smtp transaction, the message will be delivered to
such members only once. the same applies if the address in the message
from-header is the address of a member: that member won't receive the message
(they sent it). this prevents duplicate messages.
aliases have three configuration options:
- PostPublic: whether anyone can send through the alias, or only members.
members-only lists can be useful inside organizations for internal
communication. public lists can be useful for support addresses.
- ListMembers: whether members can see the addresses of other members. this can
be seen in the account web interface. in the future, we could export this in
other ways, so clients can expand the list.
- AllowMsgFrom: whether messages can be sent through the alias with the alias
address used in the message from-header. the webmail knows it can use that
address, and will use it as from-address when replying to a message sent to
that address.
ideas for the future:
- allow external addresses as members. still with some restrictions, such as
requiring a valid dkim-signature so delivery has a chance to succeed. will
also need configuration of an admin that can receive any bounces.
- allow specifying specific members who can sent through the list (instead of
all members).
for github issue #57 by hmfaysal.
also relevant for #99 by naturalethic.
thanks to damir & marin from sartura for discussing requirements/features.
per mailbox, or for all mailboxes, in maildir/mbox format, in tar/tgz/zip
archive or without archive format for single mbox, single or recursive. the
webaccount already had an option to export all mailboxes, it now looks similar
to the webmail version.
if the message has a list-id header, we assume this is a (mailing) list
message, and we require a dkim/spf-verified domain (we prefer the shortest that
is a suffix of the list-id value). the rule we would add will mark such
messages as from a mailing list, changing filtering rules on incoming messages
(not enforcing dmarc policies). messages will be matched on list-id header and
will only match if they have the same dkim/spf-verified domain.
if the message doesn't have a list-id header, we'll ask to match based on
"message from" address.
we don't ask the user in several cases:
- if the destination/source mailbox is a special-use mailbox (e.g.
trash,archive,sent,junk; inbox isn't included)
- if the rule already exist (no point in adding it again).
- if the user said "no, not for this list-id/from-address" in the past.
- if the user said "no, not for messages moved to this mailbox" in the past.
we'll add the rule if the message was moved out of the inbox.
if the message was moved to the inbox, we check if there is a matching rule
that we can remove.
we now remember the "no" answers (for list-id, msg-from-addr and mailbox) in
the account database.
to implement the msgfrom rules, this adds support to rulesets for matching on
message "from" address. before, we could match on smtp from address (and other
fields). rulesets now also have a field for comments. webmail adds a note that
it created the rule, with the date.
manual editing of the rulesets is still in the webaccount page. this webmail
functionality is just a convenient way to add/remove common rules.
for applications to compose/send messages, receive delivery feedback, and
maintain suppression lists.
this is an alternative to applications using a library to compose messages,
submitting those messages using smtp, and monitoring a mailbox with imap for
DSNs, which can be processed into the equivalent of suppression lists. but you
need to know about all these standards/protocols and find libraries. by using
the webapi & webhooks, you just need a http & json library.
unfortunately, there is no standard for these kinds of api, so mox has made up
yet another one...
matching incoming DSNs about deliveries to original outgoing messages requires
keeping history of "retired" messages (delivered from the queue, either
successfully or failed). this can be enabled per account. history is also
useful for debugging deliveries. we now also keep history of each delivery
attempt, accessible while still in the queue, and kept when a message is
retired. the queue webadmin pages now also have pagination, to show potentially
large history.
a queue of webhook calls is now managed too. failures are retried similar to
message deliveries. webhooks can also be saved to the retired list after
completing. also configurable per account.
messages can be sent with a "unique smtp mail from" address. this can only be
used if the domain is configured with a localpart catchall separator such as
"+". when enabled, a queued message gets assigned a random "fromid", which is
added after the separator when sending. when DSNs are returned, they can be
related to previously sent messages based on this fromid. in the future, we can
implement matching on the "envid" used in the smtp dsn extension, or on the
"message-id" of the message. using a fromid can be triggered by authenticating
with a login email address that is configured as enabling fromid.
suppression lists are automatically managed per account. if a delivery attempt
results in certain smtp errors, the destination address is added to the
suppression list. future messages queued for that recipient will immediately
fail without a delivery attempt. suppression lists protect your mail server
reputation.
submitted messages can carry "extra" data through the queue and webhooks for
outgoing deliveries. through webapi as a json object, through smtp submission
as message headers of the form "x-mox-extra-<key>: value".
to make it easy to test webapi/webhooks locally, the "localserve" mode actually
puts messages in the queue. when it's time to deliver, it still won't do a full
delivery attempt, but just delivers to the sender account. unless the recipient
address has a special form, simulating a failure to deliver.
admins now have more control over the queue. "hold rules" can be added to mark
newly queued messages as "on hold", pausing delivery. rules can be about
certain sender or recipient domains/addresses, or apply to all messages pausing
the entire queue. also useful for (local) testing.
new config options have been introduced. they are editable through the admin
and/or account web interfaces.
the webapi http endpoints are enabled for newly generated configs with the
quickstart, and in localserve. existing configurations must explicitly enable
the webapi in mox.conf.
gopherwatch.org was created to dogfood this code. it initially used just the
compose/smtpclient/imapclient mox packages to send messages and process
delivery feedback. it will get a config option to use the mox webapi/webhooks
instead. the gopherwatch code to use webapi/webhook is smaller and simpler, and
developing that shaped development of the mox webapi/webhooks.
for issue #31 by cuu508
typescript now knows the full types, not just "any" for account config.
inline structs previously in config.Account are given their own type definition
so sherpa can generate types.
also update to latest sherpa lib that knows about time.Duration, to be used soon.
we only have a "storage" limit. for total disk usage. we don't have a limit on
messages (count) or mailboxes (count). also not on total annotation size, but
we don't have support annotations at all at the moment.
we don't implement setquota. with rfc 9208 that's allowed. with the previous
quota rfc 2087 it wasn't.
the status command can now return "DELETED-STORAGE". which should be the disk
space that can be reclaimed by removing messages with the \Deleted flags.
however, it's not very likely clients set the \Deleted flag without expunging
the message immediately. we don't want to go through all messages to calculate
the sum of message sizes with the deleted flag. we also don't currently track
that in MailboxCount. so we just respond with "0". not compliant, but let's
wait until someone complains.
when returning quota information, it is not possible to give the current usage
when no limit is configured. clients implementing rfc 9208 should probably
conclude from the presence of QUOTA=RES-* capabilities (only in rfc 9208, not
in 2087) and the absence of those limits in quota responses (or the absence of
an untagged quota response at all) that a resource type doesn't have a limit.
thunderbird will claim there is no quota information when no limit was
configured, so we can probably conclude that it implements rfc 2087, but not
rfc 9208.
we now also show the usage & limit on the account page.
for issue #115 by pmarini
preventing writing out a domains.conf that is invalid and can't be parsed
again. this happens when the last address was removed from an account. just a
click in the admin web interface.
accounts without email address cannot log in.
for issue #133 by ally9335
most content is in markdown files in website/, some is taken out of the repo
README and rfc/index.txt. a Go file generates html. static files are kept in a
separate repo due to size.
the http basic auth we had was very simple to reason about, and to implement.
but it has a major downside:
there is no way to logout, browsers keep sending credentials. ideally, browsers
themselves would show a button to stop sending credentials.
a related downside: the http auth mechanism doesn't indicate for which server
paths the credentials are.
another downside: the original password is sent to the server with each
request. though sending original passwords to web servers seems to be
considered normal.
our new approach uses session cookies, along with csrf values when we can. the
sessions are server-side managed, automatically extended on each use. this
makes it easy to invalidate sessions and keeps the frontend simpler (than with
long- vs short-term sessions and refreshing). the cookies are httponly,
samesite=strict, scoped to the path of the web interface. cookies are set
"secure" when set over https. the cookie is set by a successful call to Login.
a call to Logout invalidates a session. changing a password invalidates all
sessions for a user, but keeps the session with which the password was changed
alive. the csrf value is also random, and associated with the session cookie.
the csrf must be sent as header for api calls, or as parameter for direct form
posts (where we cannot set a custom header). rest-like calls made directly by
the browser, e.g. for images, don't have a csrf protection. the csrf value is
returned by the Login api call and stored in localstorage.
api calls without credentials return code "user:noAuth", and with bad
credentials return "user:badAuth". the api client recognizes this and triggers
a login. after a login, all auth-failed api calls are automatically retried.
only for "user:badAuth" is an error message displayed in the login form (e.g.
session expired).
in an ideal world, browsers would take care of most session management. a
server would indicate authentication is needed (like http basic auth), and the
browsers uses trusted ui to request credentials for the server & path. the
browser could use safer mechanism than sending original passwords to the
server, such as scram, along with a standard way to create sessions. for now,
web developers have to do authentication themselves: from showing the login
prompt, ensuring the right session/csrf cookies/localstorage/headers/etc are
sent with each request.
webauthn is a newer way to do authentication, perhaps we'll implement it in the
future. though hardware tokens aren't an attractive option for many users, and
it may be overkill as long as we still do old-fashioned authentication in smtp
& imap where passwords can be sent to the server.
for issue #58
all ui frontend code is now in typescript. we no longer need jshint, and we
build the frontend code during "make build".
this also changes tlsrpt types for a Report, not encoding field names with
dashes, but to keep them valid identifiers in javascript. this makes it more
conveniently to work with in the frontend, and works around a sherpats
limitation.
