increase() and rate() don't seem to assume a previous value of 0 when a vector
gets a first value for a label. you would think that an increase() on a
first-value mox_panic_total{"..."}=1 would return 1, and similar for rate(), but
that doesn't appear to be the behaviour. so we just explicitly initialize the
count to 0 for each possible label value. mox has more vector metrics, but
panics feels like the most important, and it's too much code to initialize them
all, for all combinations of label values. there is probably a better way that
fixes this for all cases...
we match messages to their parents based on the "references" and "in-reply-to"
headers (requiring the same base subject), and in absense of those headers we
also by only base subject (against messages received max 4 weeks ago).
we store a threadid with messages. all messages in a thread have the same
threadid. messages also have a "thread parent ids", which holds all id's of
parent messages up to the thread root. then there is "thread missing link",
which is set when a referenced immediate parent wasn't found (but possibly
earlier ancestors can still be found and will be in thread parent ids".
threads can be muted: newly delivered messages are automatically marked as
read/seen. threads can be marked as collapsed: if set, the webmail collapses
the thread to a single item in the basic threading view (default is to expand
threads). the muted and collapsed fields are copied from their parent on
message delivery.
the threading is implemented in the webmail. the non-threading mode still works
as before. the new default threading mode "unread" automatically expands only
the threads with at least one unread (not seen) meessage. the basic threading
mode "on" expands all threads except when explicitly collapsed (as saved in the
thread collapsed field). new shortcuts for navigation/interaction threads have
been added, e.g. go to previous/next thread root, toggle collapse/expand of
thread (or double click), toggle mute of thread. some previous shortcuts have
changed, see the help for details.
the message threading are added with an explicit account upgrade step,
automatically started when an account is opened. the upgrade is done in the
background because it will take too long for large mailboxes to block account
operations. the upgrade takes two steps: 1. updating all message records in the
database to add a normalized message-id and thread base subject (with "re:",
"fwd:" and several other schemes stripped). 2. going through all messages in
the database again, reading the "references" and "in-reply-to" headers from
disk, and matching against their parents. this second step is also done at the
end of each import of mbox/maildir mailboxes. new deliveries are matched
immediately against other existing messages, currently no attempt is made to
rematch previously delivered messages (which could be useful for related
messages being delivered out of order).
the threading is not yet exposed over imap.
this is a problem for connections like SSE, that only send data on events.
those events would stay in the gzip buffer until lots more data was written.
bug because of automatically typing "if err != nil"...
found while testing the maildir/mbox web-based import while working on message
threading support. the import gets progress SSE events that were now hanging.
they were not added to the list of attachments when sending the message to the
webmail frontend. they were shown on the "open message in new tab" page.
due to a missing return, the content was served again.
this path doesn't happen on release binaries, only during local development,
where there is a local file that can be served.
for submission, we don't care about the value. users typically won't be able to
easily fix the errors (of their mail client software). so we just ignore the
domain/ip address, unless in pedantic mode.
this also parses "additional information after literal addresses" more
strictly/correctly.
for issue #55 by gimpf, thanks for the report!
the assumption has been that the hostname is something like mail.<domain>, when
setting up mox with the quickstart for user@<domain>. but users can use the
quickstart for postmaster@mail.<domain> as well.
for issue #46 by x8x, thanks for reporting!
such messages would be marked expunged in the database, then the junkfilter
would be retrained for the removal of the message. but during retraining, the
expunged flag would be cleared again. the on-disk message file would still be
removed. so when opening the mailbox, the message would appear to still exist,
but cannot be retrieved from disk.
if you run "mox fixmsgsize", and you get warnings about missing message files,
you could create empty files (with "touch"), run "mox fixsmsgsize" again,
followed by "mox recalculatemailboxcounts <affectedaccount>" and run "mox
bumpuidvalidity <affectaccount>".
"mox backup" would probably also complain, as would "mox verifydata".
this may have caused the "wrong mailbox counts" error i got from "mox
verifydata" on a backup.
for example, when these mailboxes existed: "a", "a.b", "a/b", then "a.b" (.
before / in ascii) prevented "a/b" from being displayed in the tree below "a".
to accept reports for another domain, first add that domain to the config,
leaving all options empty except DMARC/TLSRPT in which you configure a Domain.
the suggested DNS DMARC/TLSRPT records will show the email address with
configured domain. for DMARC, the dnscheck functionality will verify that the
destination domain has opted in to receiving reports.
there is a new command-line subcommand "mox dmarc checkreportaddrs" that
verifies if dmarc reporting destination addresses have opted in to received
reports.
this also changes the suggested dns records (in quickstart, and through admin
pages and cli subcommand) to take into account whether DMARC and TLSRPT is
configured, and with which localpart/domain (previously it always printed
records as if reporting was enabled for the domain). and when generating the
suggested DNS records, the dmarc.Record and tlsrpt.Record code is used, with
proper uri-escaping.
we only compress if applicable (content-type indicates likely compressible),
client supports it, response doesn't already have a content-encoding).
for internal handlers, we always enable compression. for reverse proxied and
static files, compression must be enabled per handler.
for internal & reverse proxy handlers, we do streaming compression at
"bestspeed" quality (probably level 1).
for static files, we have a cache based on mtime with fixed max size, where we
evict based on least recently used. we compress with the default level (more
cpu, better ratio).
due to logic bug we weren't setting it, and tls connections would fail with a
warning that either the remote hostname must be set or insecurityskipverify
must be set.
because outlook.com will reformat the message and then fail to verify the message.
proton.me also reformats and invalidates the dkim signature, but seemingly
after it verifies the dkim signature.
the commit before the previous added tests with a message with only 1 header
line. it's a valid message, but Go's mail.ReadMessage doesn't handle it with
go1.20 and earlier. the automated "test with previous go release" caught it.
work around it by adding the expected but absent \r\n to the parse function.
some time ago, the flag to ParseConfig() to do or skip checking the tls
keys/certs was inverted, but it looks like i didn't change the call sites... so
during "mox config test", and after a regular "mox quickstart" there was no
check for the tls keys/certs, and during "mox quickstart -existing-webserver"
there was a check where there shouldn't be. this made using -existing-webserver
impossible.
this became clear with the question by morki in issue #5.
NATIPs lists the public IPs, so we can still do the DNS checks on them. with
IPsNATed, we disabled the checks.
based on feedback by kikoreis in issue #52
the recent webmail addition added localserve local delivery in queue.Add, so we
just that for smtpserver too.
and don't drop incoming smtp deliver messages, but deliver as normal.
- padding on small attachment download button.
- don't remember "show html" but always display text first.
- propagate modseq to message when flags/keywords change, so "show internals" shows the update.
without public ip's, the generated mox config will try to listen on 0.0.0.0 and
::, but because there is already a listener for 127.0.0.1:80 (and possibly
others), a bind for 0.0.0.0:80 will fail. explicit public ip's are needed.
the public http listener is useful for ACME validation over http.
for issue #52
