mox/vendor/golang.org/x/text/encoding/unicode/unicode.go
Mechiel Lukkien 01adad62b2
implement decoding charsets (other than ascii and utf-8) while reading textual message parts, and improve search
message.Part now has a ReaderUTF8OrBinary() along with the existing Reader().
the new function returns a reader of decoded content. we now use it in a few
places, including search. we only support the charsets in
golang.org/x/text/encoding/ianaindex.

search has also been changed to not read the entire message in memory. instead,
we make one 8k buffer for reading and search in that, and we keep the buffer
around for all messages. saves quite some allocations when searching large
mailboxes.
2023-07-28 22:15:23 +02:00

512 lines
15 KiB
Go

// Copyright 2013 The Go Authors. All rights reserved.
// Use of this source code is governed by a BSD-style
// license that can be found in the LICENSE file.
// Package unicode provides Unicode encodings such as UTF-16.
package unicode // import "golang.org/x/text/encoding/unicode"
import (
"bytes"
"errors"
"unicode/utf16"
"unicode/utf8"
"golang.org/x/text/encoding"
"golang.org/x/text/encoding/internal"
"golang.org/x/text/encoding/internal/identifier"
"golang.org/x/text/internal/utf8internal"
"golang.org/x/text/runes"
"golang.org/x/text/transform"
)
// TODO: I think the Transformers really should return errors on unmatched
// surrogate pairs and odd numbers of bytes. This is not required by RFC 2781,
// which leaves it open, but is suggested by WhatWG. It will allow for all error
// modes as defined by WhatWG: fatal, HTML and Replacement. This would require
// the introduction of some kind of error type for conveying the erroneous code
// point.
// UTF8 is the UTF-8 encoding. It neither removes nor adds byte order marks.
var UTF8 encoding.Encoding = utf8enc
// UTF8BOM is an UTF-8 encoding where the decoder strips a leading byte order
// mark while the encoder adds one.
//
// Some editors add a byte order mark as a signature to UTF-8 files. Although
// the byte order mark is not useful for detecting byte order in UTF-8, it is
// sometimes used as a convention to mark UTF-8-encoded files. This relies on
// the observation that the UTF-8 byte order mark is either an illegal or at
// least very unlikely sequence in any other character encoding.
var UTF8BOM encoding.Encoding = utf8bomEncoding{}
type utf8bomEncoding struct{}
func (utf8bomEncoding) String() string {
return "UTF-8-BOM"
}
func (utf8bomEncoding) ID() (identifier.MIB, string) {
return identifier.Unofficial, "x-utf8bom"
}
func (utf8bomEncoding) NewEncoder() *encoding.Encoder {
return &encoding.Encoder{
Transformer: &utf8bomEncoder{t: runes.ReplaceIllFormed()},
}
}
func (utf8bomEncoding) NewDecoder() *encoding.Decoder {
return &encoding.Decoder{Transformer: &utf8bomDecoder{}}
}
var utf8enc = &internal.Encoding{
&internal.SimpleEncoding{utf8Decoder{}, runes.ReplaceIllFormed()},
"UTF-8",
identifier.UTF8,
}
type utf8bomDecoder struct {
checked bool
}
func (t *utf8bomDecoder) Reset() {
t.checked = false
}
func (t *utf8bomDecoder) Transform(dst, src []byte, atEOF bool) (nDst, nSrc int, err error) {
if !t.checked {
if !atEOF && len(src) < len(utf8BOM) {
if len(src) == 0 {
return 0, 0, nil
}
return 0, 0, transform.ErrShortSrc
}
if bytes.HasPrefix(src, []byte(utf8BOM)) {
nSrc += len(utf8BOM)
src = src[len(utf8BOM):]
}
t.checked = true
}
nDst, n, err := utf8Decoder.Transform(utf8Decoder{}, dst[nDst:], src, atEOF)
nSrc += n
return nDst, nSrc, err
}
type utf8bomEncoder struct {
written bool
t transform.Transformer
}
func (t *utf8bomEncoder) Reset() {
t.written = false
t.t.Reset()
}
func (t *utf8bomEncoder) Transform(dst, src []byte, atEOF bool) (nDst, nSrc int, err error) {
if !t.written {
if len(dst) < len(utf8BOM) {
return nDst, 0, transform.ErrShortDst
}
nDst = copy(dst, utf8BOM)
t.written = true
}
n, nSrc, err := utf8Decoder.Transform(utf8Decoder{}, dst[nDst:], src, atEOF)
nDst += n
return nDst, nSrc, err
}
type utf8Decoder struct{ transform.NopResetter }
func (utf8Decoder) Transform(dst, src []byte, atEOF bool) (nDst, nSrc int, err error) {
var pSrc int // point from which to start copy in src
var accept utf8internal.AcceptRange
// The decoder can only make the input larger, not smaller.
n := len(src)
if len(dst) < n {
err = transform.ErrShortDst
n = len(dst)
atEOF = false
}
for nSrc < n {
c := src[nSrc]
if c < utf8.RuneSelf {
nSrc++
continue
}
first := utf8internal.First[c]
size := int(first & utf8internal.SizeMask)
if first == utf8internal.FirstInvalid {
goto handleInvalid // invalid starter byte
}
accept = utf8internal.AcceptRanges[first>>utf8internal.AcceptShift]
if nSrc+size > n {
if !atEOF {
// We may stop earlier than necessary here if the short sequence
// has invalid bytes. Not checking for this simplifies the code
// and may avoid duplicate computations in certain conditions.
if err == nil {
err = transform.ErrShortSrc
}
break
}
// Determine the maximal subpart of an ill-formed subsequence.
switch {
case nSrc+1 >= n || src[nSrc+1] < accept.Lo || accept.Hi < src[nSrc+1]:
size = 1
case nSrc+2 >= n || src[nSrc+2] < utf8internal.LoCB || utf8internal.HiCB < src[nSrc+2]:
size = 2
default:
size = 3 // As we are short, the maximum is 3.
}
goto handleInvalid
}
if c = src[nSrc+1]; c < accept.Lo || accept.Hi < c {
size = 1
goto handleInvalid // invalid continuation byte
} else if size == 2 {
} else if c = src[nSrc+2]; c < utf8internal.LoCB || utf8internal.HiCB < c {
size = 2
goto handleInvalid // invalid continuation byte
} else if size == 3 {
} else if c = src[nSrc+3]; c < utf8internal.LoCB || utf8internal.HiCB < c {
size = 3
goto handleInvalid // invalid continuation byte
}
nSrc += size
continue
handleInvalid:
// Copy the scanned input so far.
nDst += copy(dst[nDst:], src[pSrc:nSrc])
// Append RuneError to the destination.
const runeError = "\ufffd"
if nDst+len(runeError) > len(dst) {
return nDst, nSrc, transform.ErrShortDst
}
nDst += copy(dst[nDst:], runeError)
// Skip the maximal subpart of an ill-formed subsequence according to
// the W3C standard way instead of the Go way. This Transform is
// probably the only place in the text repo where it is warranted.
nSrc += size
pSrc = nSrc
// Recompute the maximum source length.
if sz := len(dst) - nDst; sz < len(src)-nSrc {
err = transform.ErrShortDst
n = nSrc + sz
atEOF = false
}
}
return nDst + copy(dst[nDst:], src[pSrc:nSrc]), nSrc, err
}
// UTF16 returns a UTF-16 Encoding for the given default endianness and byte
// order mark (BOM) policy.
//
// When decoding from UTF-16 to UTF-8, if the BOMPolicy is IgnoreBOM then
// neither BOMs U+FEFF nor noncharacters U+FFFE in the input stream will affect
// the endianness used for decoding, and will instead be output as their
// standard UTF-8 encodings: "\xef\xbb\xbf" and "\xef\xbf\xbe". If the BOMPolicy
// is UseBOM or ExpectBOM a staring BOM is not written to the UTF-8 output.
// Instead, it overrides the default endianness e for the remainder of the
// transformation. Any subsequent BOMs U+FEFF or noncharacters U+FFFE will not
// affect the endianness used, and will instead be output as their standard
// UTF-8 encodings. For UseBOM, if there is no starting BOM, it will proceed
// with the default Endianness. For ExpectBOM, in that case, the transformation
// will return early with an ErrMissingBOM error.
//
// When encoding from UTF-8 to UTF-16, a BOM will be inserted at the start of
// the output if the BOMPolicy is UseBOM or ExpectBOM. Otherwise, a BOM will not
// be inserted. The UTF-8 input does not need to contain a BOM.
//
// There is no concept of a 'native' endianness. If the UTF-16 data is produced
// and consumed in a greater context that implies a certain endianness, use
// IgnoreBOM. Otherwise, use ExpectBOM and always produce and consume a BOM.
//
// In the language of https://www.unicode.org/faq/utf_bom.html#bom10, IgnoreBOM
// corresponds to "Where the precise type of the data stream is known... the
// BOM should not be used" and ExpectBOM corresponds to "A particular
// protocol... may require use of the BOM".
func UTF16(e Endianness, b BOMPolicy) encoding.Encoding {
return utf16Encoding{config{e, b}, mibValue[e][b&bomMask]}
}
// mibValue maps Endianness and BOMPolicy settings to MIB constants. Note that
// some configurations map to the same MIB identifier. RFC 2781 has requirements
// and recommendations. Some of the "configurations" are merely recommendations,
// so multiple configurations could match.
var mibValue = map[Endianness][numBOMValues]identifier.MIB{
BigEndian: [numBOMValues]identifier.MIB{
IgnoreBOM: identifier.UTF16BE,
UseBOM: identifier.UTF16, // BigEnding default is preferred by RFC 2781.
// TODO: acceptBOM | strictBOM would map to UTF16BE as well.
},
LittleEndian: [numBOMValues]identifier.MIB{
IgnoreBOM: identifier.UTF16LE,
UseBOM: identifier.UTF16, // LittleEndian default is allowed and preferred on Windows.
// TODO: acceptBOM | strictBOM would map to UTF16LE as well.
},
// ExpectBOM is not widely used and has no valid MIB identifier.
}
// All lists a configuration for each IANA-defined UTF-16 variant.
var All = []encoding.Encoding{
UTF8,
UTF16(BigEndian, UseBOM),
UTF16(BigEndian, IgnoreBOM),
UTF16(LittleEndian, IgnoreBOM),
}
// BOMPolicy is a UTF-16 encoding's byte order mark policy.
type BOMPolicy uint8
const (
writeBOM BOMPolicy = 0x01
acceptBOM BOMPolicy = 0x02
requireBOM BOMPolicy = 0x04
bomMask BOMPolicy = 0x07
// HACK: numBOMValues == 8 triggers a bug in the 1.4 compiler (cannot have a
// map of an array of length 8 of a type that is also used as a key or value
// in another map). See golang.org/issue/11354.
// TODO: consider changing this value back to 8 if the use of 1.4.* has
// been minimized.
numBOMValues = 8 + 1
// IgnoreBOM means to ignore any byte order marks.
IgnoreBOM BOMPolicy = 0
// Common and RFC 2781-compliant interpretation for UTF-16BE/LE.
// UseBOM means that the UTF-16 form may start with a byte order mark, which
// will be used to override the default encoding.
UseBOM BOMPolicy = writeBOM | acceptBOM
// Common and RFC 2781-compliant interpretation for UTF-16.
// ExpectBOM means that the UTF-16 form must start with a byte order mark,
// which will be used to override the default encoding.
ExpectBOM BOMPolicy = writeBOM | acceptBOM | requireBOM
// Used in Java as Unicode (not to be confused with Java's UTF-16) and
// ICU's UTF-16,version=1. Not compliant with RFC 2781.
// TODO (maybe): strictBOM: BOM must match Endianness. This would allow:
// - UTF-16(B|L)E,version=1: writeBOM | acceptBOM | requireBOM | strictBOM
// (UnicodeBig and UnicodeLittle in Java)
// - RFC 2781-compliant, but less common interpretation for UTF-16(B|L)E:
// acceptBOM | strictBOM (e.g. assigned to CheckBOM).
// This addition would be consistent with supporting ExpectBOM.
)
// Endianness is a UTF-16 encoding's default endianness.
type Endianness bool
const (
// BigEndian is UTF-16BE.
BigEndian Endianness = false
// LittleEndian is UTF-16LE.
LittleEndian Endianness = true
)
// ErrMissingBOM means that decoding UTF-16 input with ExpectBOM did not find a
// starting byte order mark.
var ErrMissingBOM = errors.New("encoding: missing byte order mark")
type utf16Encoding struct {
config
mib identifier.MIB
}
type config struct {
endianness Endianness
bomPolicy BOMPolicy
}
func (u utf16Encoding) NewDecoder() *encoding.Decoder {
return &encoding.Decoder{Transformer: &utf16Decoder{
initial: u.config,
current: u.config,
}}
}
func (u utf16Encoding) NewEncoder() *encoding.Encoder {
return &encoding.Encoder{Transformer: &utf16Encoder{
endianness: u.endianness,
initialBOMPolicy: u.bomPolicy,
currentBOMPolicy: u.bomPolicy,
}}
}
func (u utf16Encoding) ID() (mib identifier.MIB, other string) {
return u.mib, ""
}
func (u utf16Encoding) String() string {
e, b := "B", ""
if u.endianness == LittleEndian {
e = "L"
}
switch u.bomPolicy {
case ExpectBOM:
b = "Expect"
case UseBOM:
b = "Use"
case IgnoreBOM:
b = "Ignore"
}
return "UTF-16" + e + "E (" + b + " BOM)"
}
type utf16Decoder struct {
initial config
current config
}
func (u *utf16Decoder) Reset() {
u.current = u.initial
}
func (u *utf16Decoder) Transform(dst, src []byte, atEOF bool) (nDst, nSrc int, err error) {
if len(src) < 2 && atEOF && u.current.bomPolicy&requireBOM != 0 {
return 0, 0, ErrMissingBOM
}
if len(src) == 0 {
return 0, 0, nil
}
if len(src) >= 2 && u.current.bomPolicy&acceptBOM != 0 {
switch {
case src[0] == 0xfe && src[1] == 0xff:
u.current.endianness = BigEndian
nSrc = 2
case src[0] == 0xff && src[1] == 0xfe:
u.current.endianness = LittleEndian
nSrc = 2
default:
if u.current.bomPolicy&requireBOM != 0 {
return 0, 0, ErrMissingBOM
}
}
u.current.bomPolicy = IgnoreBOM
}
var r rune
var dSize, sSize int
for nSrc < len(src) {
if nSrc+1 < len(src) {
x := uint16(src[nSrc+0])<<8 | uint16(src[nSrc+1])
if u.current.endianness == LittleEndian {
x = x>>8 | x<<8
}
r, sSize = rune(x), 2
if utf16.IsSurrogate(r) {
if nSrc+3 < len(src) {
x = uint16(src[nSrc+2])<<8 | uint16(src[nSrc+3])
if u.current.endianness == LittleEndian {
x = x>>8 | x<<8
}
// Save for next iteration if it is not a high surrogate.
if isHighSurrogate(rune(x)) {
r, sSize = utf16.DecodeRune(r, rune(x)), 4
}
} else if !atEOF {
err = transform.ErrShortSrc
break
}
}
if dSize = utf8.RuneLen(r); dSize < 0 {
r, dSize = utf8.RuneError, 3
}
} else if atEOF {
// Single trailing byte.
r, dSize, sSize = utf8.RuneError, 3, 1
} else {
err = transform.ErrShortSrc
break
}
if nDst+dSize > len(dst) {
err = transform.ErrShortDst
break
}
nDst += utf8.EncodeRune(dst[nDst:], r)
nSrc += sSize
}
return nDst, nSrc, err
}
func isHighSurrogate(r rune) bool {
return 0xDC00 <= r && r <= 0xDFFF
}
type utf16Encoder struct {
endianness Endianness
initialBOMPolicy BOMPolicy
currentBOMPolicy BOMPolicy
}
func (u *utf16Encoder) Reset() {
u.currentBOMPolicy = u.initialBOMPolicy
}
func (u *utf16Encoder) Transform(dst, src []byte, atEOF bool) (nDst, nSrc int, err error) {
if u.currentBOMPolicy&writeBOM != 0 {
if len(dst) < 2 {
return 0, 0, transform.ErrShortDst
}
dst[0], dst[1] = 0xfe, 0xff
u.currentBOMPolicy = IgnoreBOM
nDst = 2
}
r, size := rune(0), 0
for nSrc < len(src) {
r = rune(src[nSrc])
// Decode a 1-byte rune.
if r < utf8.RuneSelf {
size = 1
} else {
// Decode a multi-byte rune.
r, size = utf8.DecodeRune(src[nSrc:])
if size == 1 {
// All valid runes of size 1 (those below utf8.RuneSelf) were
// handled above. We have invalid UTF-8 or we haven't seen the
// full character yet.
if !atEOF && !utf8.FullRune(src[nSrc:]) {
err = transform.ErrShortSrc
break
}
}
}
if r <= 0xffff {
if nDst+2 > len(dst) {
err = transform.ErrShortDst
break
}
dst[nDst+0] = uint8(r >> 8)
dst[nDst+1] = uint8(r)
nDst += 2
} else {
if nDst+4 > len(dst) {
err = transform.ErrShortDst
break
}
r1, r2 := utf16.EncodeRune(r)
dst[nDst+0] = uint8(r1 >> 8)
dst[nDst+1] = uint8(r1)
dst[nDst+2] = uint8(r2 >> 8)
dst[nDst+3] = uint8(r2)
nDst += 4
}
nSrc += size
}
if u.endianness == LittleEndian {
for i := 0; i < nDst; i += 2 {
dst[i], dst[i+1] = dst[i+1], dst[i]
}
}
return nDst, nSrc, err
}