serv/mox
1
0
Fork 0
mirror of https://github.com/mjl-/mox.git synced 2024-12-26 00:13:47 +03:00
Code Issues Projects Releases Packages Wiki Activity Actions 1
mox/gentestdata.go
Mechiel Lukkien 28fae96a9b
make mox compile on windows, without "mox serve" but with working "mox localserve" 
getting mox to compile required changing code in only a few places where
package "syscall" was used: for accessing file access times and for umask
handling. an open problem is how to start a process as an unprivileged user on
windows.  that's why "mox serve" isn't implemented yet. and just finding a way
to implement it now may not be good enough in the near future: we may want to
starting using a more complete privilege separation approach, with a process
handling sensitive tasks (handling private keys, authentication), where we may
want to pass file descriptors between processes. how would that work on
windows?

anyway, getting mox to compile for windows doesn't mean it works properly on
windows. the largest issue: mox would normally open a file, rename or remove
it, and finally close it. this happens during message delivery. that doesn't
work on windows, the rename/remove would fail because the file is still open.
so this commit swaps many "remove" and "close" calls. renames are a longer
story: message delivery had two ways to deliver: with "consuming" the
(temporary) message file (which would rename it to its final destination), and
without consuming (by hardlinking the file, falling back to copying). the last
delivery to a recipient of a message (and the only one in the common case of a
single recipient) would consume the message, and the earlier recipients would
not.  during delivery, the already open message file was used, to parse the
message.  we still want to use that open message file, and the caller now stays
responsible for closing it, but we no longer try to rename (consume) the file.
we always hardlink (or copy) during delivery (this works on windows), and the
caller is responsible for closing and removing (in that order) the original
temporary file. this does cost one syscall more. but it makes the delivery code
(responsibilities) a bit simpler.

there is one more obvious issue: the file system path separator. mox already
used the "filepath" package to join paths in many places, but not everywhere.
and it still used strings with slashes for local file access. with this commit,
the code now uses filepath.FromSlash for path strings with slashes, uses
"filepath" in a few more places where it previously didn't. also switches from
"filepath" to regular "path" package when handling mailbox names in a few
places, because those always use forward slashes, regardless of local file
system conventions.  windows can handle forward slashes when opening files, so
test code that passes path strings with forward slashes straight to go stdlib
file i/o functions are left unchanged to reduce code churn. the regular
non-test code, or test code that uses path strings in places other than
standard i/o functions, does have the paths converted for consistent paths
(otherwise we would end up with paths with mixed forward/backward slashes in
log messages).

windows cannot dup a listening socket. for "mox localserve", it isn't
important, and we can work around the issue. the current approach for "mox
serve" (forking a process and passing file descriptors of listening sockets on
"privileged" ports) won't work on windows. perhaps it isn't needed on windows,
and any user can listen on "privileged" ports? that would be welcome.

on windows, os.Open cannot open a directory, so we cannot call Sync on it after
message delivery. a cursory internet search indicates that directories cannot
be synced on windows. the story is probably much more nuanced than that, with
long deep technical details/discussions/disagreement/confusion, like on unix.
for "mox localserve" we can get away with making syncdir a no-op.
2023-10-14 10:54:07 +02:00

398 lines
12 KiB
Go
Raw Blame History

package main
import (
"context"
"fmt"
"log"
"os"
"path/filepath"
"strings"
"time"
"github.com/mjl-/bstore"
"github.com/mjl-/sconf"
"github.com/mjl-/mox/config"
"github.com/mjl-/mox/dmarcdb"
"github.com/mjl-/mox/dmarcrpt"
"github.com/mjl-/mox/dns"
"github.com/mjl-/mox/mlog"
"github.com/mjl-/mox/mox-"
"github.com/mjl-/mox/moxvar"
"github.com/mjl-/mox/mtasts"
"github.com/mjl-/mox/mtastsdb"
"github.com/mjl-/mox/queue"
"github.com/mjl-/mox/smtp"
"github.com/mjl-/mox/store"
"github.com/mjl-/mox/tlsrpt"
"github.com/mjl-/mox/tlsrptdb"
)
func cmdGentestdata(c *cmd) {
c.unlisted = true
c.params = "dest-dir"
c.help = `Generate a data directory populated, for testing upgrades.`
args := c.Parse()
if len(args) != 1 {
c.Usage()
}
destDataDir, err := filepath.Abs(args[0])
xcheckf(err, "making destination directory an absolute path")
if _, err := os.Stat(destDataDir); err == nil {
log.Fatalf("destination directory already exists, refusing to generate test data")
}
err = os.MkdirAll(destDataDir, 0770)
xcheckf(err, "creating destination data directory")
err = os.MkdirAll(filepath.Join(destDataDir, "tmp"), 0770)
xcheckf(err, "creating tmp directory")
tempfile := func() *os.File {
f, err := os.CreateTemp(filepath.Join(destDataDir, "tmp"), "temp")
xcheckf(err, "creating temp file")
return f
}
log := mlog.New("gentestdata")
ctxbg := context.Background()
mox.Conf.Log[""] = mlog.LevelInfo
mlog.SetConfig(mox.Conf.Log)
const domainsConf = `
Domains:
mox.example: nil
☺.example: nil
Accounts:
test0:
Domain: mox.example
Destinations:
test0@mox.example: nil
test1:
Domain: mox.example
Destinations:
test1@mox.example: nil
test2:
Domain: ☺.example
Destinations:
☹@☺.example: nil
JunkFilter:
Threshold: 0.95
Params:
Twograms: true
MaxPower: 0.1
TopWords: 10
IgnoreWords: 0.1
`
mox.ConfigStaticPath = filepath.FromSlash("/tmp/mox-bogus/mox.conf")
mox.ConfigDynamicPath = filepath.FromSlash("/tmp/mox-bogus/domains.conf")
mox.Conf.DynamicLastCheck = time.Now() // Should prevent warning.
mox.Conf.Static = config.Static{
DataDir: destDataDir,
}
err = sconf.Parse(strings.NewReader(domainsConf), &mox.Conf.Dynamic)
xcheckf(err, "parsing domains config")
const dmarcReport = `<?xml version="1.0" encoding="UTF-8" ?>
<feedback>
<report_metadata>
<org_name>google.com</org_name>
<email>noreply-dmarc-support@google.com</email>
<extra_contact_info>https://support.google.com/a/answer/2466580</extra_contact_info>
<report_id>10051505501689795560</report_id>
<date_range>
<begin>1596412800</begin>
<end>1596499199</end>
</date_range>
</report_metadata>
<policy_published>
<domain>mox.example</domain>
<adkim>r</adkim>
<aspf>r</aspf>
<p>reject</p>
<sp>reject</sp>
<pct>100</pct>
</policy_published>
<record>
<row>
<source_ip>127.0.0.1</source_ip>
<count>1</count>
<policy_evaluated>
<disposition>none</disposition>
<dkim>pass</dkim>
<spf>pass</spf>
</policy_evaluated>
</row>
<identifiers>
<header_from>example.org</header_from>
</identifiers>
<auth_results>
<dkim>
<domain>example.org</domain>
<result>pass</result>
<selector>example</selector>
</dkim>
<spf>
<domain>example.org</domain>
<result>pass</result>
</spf>
</auth_results>
</record>
</feedback>
`
const tlsReport = `{
"organization-name": "Company-X",
"date-range": {
"start-datetime": "2016-04-01T00:00:00Z",
"end-datetime": "2016-04-01T23:59:59Z"
},
"contact-info": "sts-reporting@company-x.example",
"report-id": "5065427c-23d3-47ca-b6e0-946ea0e8c4be",
"policies": [{
"policy": {
"policy-type": "sts",
"policy-string": ["version: STSv1","mode: testing",
"mx: *.mail.company-y.example","max_age: 86400"],
"policy-domain": "mox.example",
"mx-host": ["*.mail.company-y.example"]
},
"summary": {
"total-successful-session-count": 5326,
"total-failure-session-count": 303
},
"failure-details": [{
"result-type": "certificate-expired",
"sending-mta-ip": "2001:db8:abcd:0012::1",
"receiving-mx-hostname": "mx1.mail.company-y.example",
"failed-session-count": 100
}, {
"result-type": "starttls-not-supported",
"sending-mta-ip": "2001:db8:abcd:0013::1",
"receiving-mx-hostname": "mx2.mail.company-y.example",
"receiving-ip": "203.0.113.56",
"failed-session-count": 200,
"additional-information": "https://reports.company-x.example/report_info ? id = 5065427 c - 23 d3# StarttlsNotSupported "
}, {
"result-type": "validation-failure",
"sending-mta-ip": "198.51.100.62",
"receiving-ip": "203.0.113.58",
"receiving-mx-hostname": "mx-backup.mail.company-y.example",
"failed-session-count": 3,
"failure-reason-code": "X509_V_ERR_PROXY_PATH_LENGTH_EXCEEDED"
}]
}]
}`
err = os.WriteFile(filepath.Join(destDataDir, "moxversion"), []byte(moxvar.Version), 0660)
xcheckf(err, "writing moxversion")
// Populate dmarc.db.
err = dmarcdb.Init()
xcheckf(err, "dmarcdb init")
report, err := dmarcrpt.ParseReport(strings.NewReader(dmarcReport))
xcheckf(err, "parsing dmarc report")
err = dmarcdb.AddReport(ctxbg, report, dns.Domain{ASCII: "mox.example"})
xcheckf(err, "adding dmarc report")
// Populate mtasts.db.
err = mtastsdb.Init(false)
xcheckf(err, "mtastsdb init")
mtastsPolicy := mtasts.Policy{
Version: "STSv1",
Mode: mtasts.ModeTesting,
MX: []mtasts.STSMX{
{Domain: dns.Domain{ASCII: "mx1.example.com"}},
{Domain: dns.Domain{ASCII: "mx2.example.com"}},
{Domain: dns.Domain{ASCII: "backup-example.com"}, Wildcard: true},
},
MaxAgeSeconds: 1296000,
}
err = mtastsdb.Upsert(ctxbg, dns.Domain{ASCII: "mox.example"}, "123", &mtastsPolicy)
xcheckf(err, "adding mtastsdb report")
// Populate tlsrpt.db.
err = tlsrptdb.Init()
xcheckf(err, "tlsrptdb init")
tlsr, err := tlsrpt.Parse(strings.NewReader(tlsReport))
xcheckf(err, "parsing tls report")
err = tlsrptdb.AddReport(ctxbg, dns.Domain{ASCII: "mox.example"}, "tlsrpt@mox.example", tlsr)
xcheckf(err, "adding tls report")
// Populate queue, with a message.
err = queue.Init()
xcheckf(err, "queue init")
mailfrom := smtp.Path{Localpart: "other", IPDomain: dns.IPDomain{Domain: dns.Domain{ASCII: "other.example"}}}
rcptto := smtp.Path{Localpart: "test0", IPDomain: dns.IPDomain{Domain: dns.Domain{ASCII: "mox.example"}}}
prefix := []byte{}
mf := tempfile()
xcheckf(err, "temp file for queue message")
defer os.Remove(mf.Name())
defer mf.Close()
const qmsg = "From: <test0@mox.example>\r\nTo: <other@remote.example>\r\nSubject: test\r\n\r\nthe message...\r\n"
_, err = fmt.Fprint(mf, qmsg)
xcheckf(err, "writing message")
_, err = queue.Add(ctxbg, log, "test0", mailfrom, rcptto, false, false, int64(len(qmsg)), "<test@localhost>", prefix, mf, nil)
xcheckf(err, "enqueue message")
// Create three accounts.
// First account without messages.
accTest0, err := store.OpenAccount("test0")
xcheckf(err, "open account test0")
err = accTest0.ThreadingWait(log)
xcheckf(err, "wait for threading to finish")
err = accTest0.Close()
xcheckf(err, "close account")
// Second account with one message.
accTest1, err := store.OpenAccount("test1")
xcheckf(err, "open account test1")
err = accTest1.ThreadingWait(log)
xcheckf(err, "wait for threading to finish")
err = accTest1.DB.Write(ctxbg, func(tx *bstore.Tx) error {
inbox, err := bstore.QueryTx[store.Mailbox](tx).FilterNonzero(store.Mailbox{Name: "Inbox"}).Get()
xcheckf(err, "looking up inbox")
const msg = "From: <other@remote.example>\r\nTo: <test1@mox.example>\r\nSubject: test\r\n\r\nthe message...\r\n"
m := store.Message{
MailboxID: inbox.ID,
MailboxOrigID: inbox.ID,
MailboxDestinedID: inbox.ID,
RemoteIP: "1.2.3.4",
RemoteIPMasked1: "1.2.3.4",
RemoteIPMasked2: "1.2.3.0",
RemoteIPMasked3: "1.2.0.0",
EHLODomain: "other.example",
MailFrom: "other@remote.example",
MailFromLocalpart: smtp.Localpart("other"),
MailFromDomain: "remote.example",
RcptToLocalpart: "test1",
RcptToDomain: "mox.example",
MsgFromLocalpart: "other",
MsgFromDomain: "remote.example",
MsgFromOrgDomain: "remote.example",
EHLOValidated: true,
MailFromValidated: true,
MsgFromValidated: true,
EHLOValidation: store.ValidationStrict,
MailFromValidation: store.ValidationPass,
MsgFromValidation: store.ValidationStrict,
DKIMDomains: []string{"other.example"},
Size: int64(len(msg)),
}
mf := tempfile()
xcheckf(err, "creating temp file for delivery")
_, err = fmt.Fprint(mf, msg)
xcheckf(err, "writing deliver message to file")
err = accTest1.DeliverMessage(log, tx, &m, mf, false, true, false)
mfname := mf.Name()
xcheckf(err, "add message to account test1")
err = mf.Close()
xcheckf(err, "closing file")
err = os.Remove(mfname)
xcheckf(err, "removing temp message file")
err = tx.Get(&inbox)
xcheckf(err, "get inbox")
inbox.Add(m.MailboxCounts())
err = tx.Update(&inbox)
xcheckf(err, "update inbox")
return nil
})
xcheckf(err, "write transaction with new message")
err = accTest1.Close()
xcheckf(err, "close account")
// Third account with two messages and junkfilter.
accTest2, err := store.OpenAccount("test2")
xcheckf(err, "open account test2")
err = accTest2.ThreadingWait(log)
xcheckf(err, "wait for threading to finish")
err = accTest2.DB.Write(ctxbg, func(tx *bstore.Tx) error {
inbox, err := bstore.QueryTx[store.Mailbox](tx).FilterNonzero(store.Mailbox{Name: "Inbox"}).Get()
xcheckf(err, "looking up inbox")
const msg0 = "From: <other@remote.example>\r\nTo: <☹@xn--74h.example>\r\nSubject: test\r\n\r\nthe message...\r\n"
m0 := store.Message{
MailboxID: inbox.ID,
MailboxOrigID: inbox.ID,
MailboxDestinedID: inbox.ID,
RemoteIP: "::1",
RemoteIPMasked1: "::",
RemoteIPMasked2: "::",
RemoteIPMasked3: "::",
EHLODomain: "other.example",
MailFrom: "other@remote.example",
MailFromLocalpart: smtp.Localpart("other"),
MailFromDomain: "remote.example",
RcptToLocalpart: "☹",
RcptToDomain: "☺.example",
MsgFromLocalpart: "other",
MsgFromDomain: "remote.example",
MsgFromOrgDomain: "remote.example",
EHLOValidated: true,
MailFromValidated: true,
MsgFromValidated: true,
EHLOValidation: store.ValidationStrict,
MailFromValidation: store.ValidationPass,
MsgFromValidation: store.ValidationStrict,
DKIMDomains: []string{"other.example"},
Size: int64(len(msg0)),
}
mf0 := tempfile()
xcheckf(err, "creating temp file for delivery")
_, err = fmt.Fprint(mf0, msg0)
xcheckf(err, "writing deliver message to file")
err = accTest2.DeliverMessage(log, tx, &m0, mf0, false, false, false)
xcheckf(err, "add message to account test2")
mf0name := mf0.Name()
err = mf0.Close()
xcheckf(err, "closing file")
err = os.Remove(mf0name)
xcheckf(err, "removing temp message file")
err = tx.Get(&inbox)
xcheckf(err, "get inbox")
inbox.Add(m0.MailboxCounts())
err = tx.Update(&inbox)
xcheckf(err, "update inbox")
sent, err := bstore.QueryTx[store.Mailbox](tx).FilterNonzero(store.Mailbox{Name: "Sent"}).Get()
xcheckf(err, "looking up inbox")
const prefix1 = "Extra: test\r\n"
const msg1 = "From: <other@remote.example>\r\nTo: <☹@xn--74h.example>\r\nSubject: test\r\n\r\nthe message...\r\n"
m1 := store.Message{
MailboxID: sent.ID,
MailboxOrigID: sent.ID,
MailboxDestinedID: sent.ID,
Flags: store.Flags{Seen: true, Junk: true},
Size: int64(len(prefix1) + len(msg1)),
MsgPrefix: []byte(prefix1),
}
mf1 := tempfile()
xcheckf(err, "creating temp file for delivery")
_, err = fmt.Fprint(mf1, msg1)
xcheckf(err, "writing deliver message to file")
err = accTest2.DeliverMessage(log, tx, &m1, mf1, false, false, false)
xcheckf(err, "add message to account test2")
mf1name := mf1.Name()
err = mf1.Close()
xcheckf(err, "closing file")
err = os.Remove(mf1name)
xcheckf(err, "removing temp message file")
err = tx.Get(&sent)
xcheckf(err, "get sent")
sent.Add(m1.MailboxCounts())
err = tx.Update(&sent)
xcheckf(err, "update sent")
return nil
})
xcheckf(err, "write transaction with new message")
err = accTest2.Close()
xcheckf(err, "close account")
}
Reference in a new issue View git blame Copy permalink