mirror of
https://github.com/mjl-/mox.git
synced 2024-12-25 07:53:47 +03:00
2255ebcf11
quite some output is printed. you could remember to tee it all to a file. but that's probably often realized only after having run the quickstart. you can also copy/paste it all from the terminal, but that's sometimes annoying to do. writing to a file is more helpful to users. this has been requested a few times in the past on irc/matrix (i forgot who).
1622 lines
57 KiB
Go
1622 lines
57 KiB
Go
/*
|
|
Command mox is a modern, secure, full-featured, open source mail server for
|
|
low-maintenance self-hosted email.
|
|
|
|
Mox is started with the "serve" subcommand, but mox also has many other
|
|
subcommands.
|
|
|
|
Many of those commands talk to a running mox instance, through the ctl file in
|
|
the data directory. Specify the configuration file (that holds the path to the
|
|
data directory) through the -config flag or MOXCONF environment variable.
|
|
|
|
Commands that don't talk to a running mox instance are often for
|
|
testing/debugging email functionality. For example for parsing an email message,
|
|
or looking up SPF/DKIM/DMARC records.
|
|
|
|
Below is the usage information as printed by the command when started without
|
|
any parameters. Followed by the help and usage information for each command.
|
|
|
|
# Usage
|
|
|
|
mox [-config config/mox.conf] [-pedantic] ...
|
|
mox serve
|
|
mox quickstart [-skipdial] [-existing-webserver] [-hostname host] user@domain [user | uid]
|
|
mox stop
|
|
mox setaccountpassword account
|
|
mox setadminpassword
|
|
mox loglevels [level [pkg]]
|
|
mox queue holdrules list
|
|
mox queue holdrules add [ruleflags]
|
|
mox queue holdrules remove ruleid
|
|
mox queue list [filtersortflags]
|
|
mox queue hold [filterflags]
|
|
mox queue unhold [filterflags]
|
|
mox queue schedule [filterflags] [-now] duration
|
|
mox queue transport [filterflags] transport
|
|
mox queue requiretls [filterflags] {yes | no | default}
|
|
mox queue fail [filterflags]
|
|
mox queue drop [filterflags]
|
|
mox queue dump id
|
|
mox queue retired list [filtersortflags]
|
|
mox queue retired print id
|
|
mox queue suppress list [-account account]
|
|
mox queue suppress add account address
|
|
mox queue suppress remove account address
|
|
mox queue suppress lookup [-account account] address
|
|
mox queue webhook list [filtersortflags]
|
|
mox queue webhook schedule [filterflags] duration
|
|
mox queue webhook cancel [filterflags]
|
|
mox queue webhook print id
|
|
mox queue webhook retired list [filtersortflags]
|
|
mox queue webhook retired print id
|
|
mox import maildir accountname mailboxname maildir
|
|
mox import mbox accountname mailboxname mbox
|
|
mox export maildir [-single] dst-dir account-path [mailbox]
|
|
mox export mbox [-single] dst-dir account-path [mailbox]
|
|
mox localserve
|
|
mox help [command ...]
|
|
mox backup dest-dir
|
|
mox verifydata data-dir
|
|
mox licenses
|
|
mox config test
|
|
mox config dnscheck domain
|
|
mox config dnsrecords domain
|
|
mox config describe-domains >domains.conf
|
|
mox config describe-static >mox.conf
|
|
mox config account add account address
|
|
mox config account rm account
|
|
mox config address add address account
|
|
mox config address rm address
|
|
mox config domain add domain account [localpart]
|
|
mox config domain rm domain
|
|
mox config tlspubkey list [account]
|
|
mox config tlspubkey get fingerprint
|
|
mox config tlspubkey add address [name] < cert.pem
|
|
mox config tlspubkey rm fingerprint
|
|
mox config tlspubkey gen stem
|
|
mox config alias list domain
|
|
mox config alias print alias
|
|
mox config alias add alias@domain rcpt1@domain ...
|
|
mox config alias update alias@domain [-postpublic false|true -listmembers false|true -allowmsgfrom false|true]
|
|
mox config alias rm alias@domain
|
|
mox config alias addaddr alias@domain rcpt1@domain ...
|
|
mox config alias rmaddr alias@domain rcpt1@domain ...
|
|
mox config describe-sendmail >/etc/moxsubmit.conf
|
|
mox config printservice >mox.service
|
|
mox config ensureacmehostprivatekeys
|
|
mox config example [name]
|
|
mox checkupdate
|
|
mox cid cid
|
|
mox clientconfig domain
|
|
mox dane dial host:port
|
|
mox dane dialmx domain [destination-host]
|
|
mox dane makerecord usage selector matchtype [certificate.pem | publickey.pem | privatekey.pem]
|
|
mox dns lookup [ptr | mx | cname | ips | a | aaaa | ns | txt | srv | tlsa] name
|
|
mox dkim gened25519 >$selector._domainkey.$domain.ed25519.privatekey.pkcs8.pem
|
|
mox dkim genrsa >$selector._domainkey.$domain.rsa2048.privatekey.pkcs8.pem
|
|
mox dkim lookup selector domain
|
|
mox dkim txt <$selector._domainkey.$domain.key.pkcs8.pem
|
|
mox dkim verify message
|
|
mox dkim sign message
|
|
mox dmarc lookup domain
|
|
mox dmarc parsereportmsg message ...
|
|
mox dmarc verify remoteip mailfromaddress helodomain < message
|
|
mox dmarc checkreportaddrs domain
|
|
mox dnsbl check zone ip
|
|
mox dnsbl checkhealth zone
|
|
mox mtasts lookup domain
|
|
mox retrain [accountname]
|
|
mox sendmail [-Fname] [ignoredflags] [-t] [<message]
|
|
mox spf check domain ip
|
|
mox spf lookup domain
|
|
mox spf parse txtrecord
|
|
mox tlsrpt lookup domain
|
|
mox tlsrpt parsereportmsg message ...
|
|
mox version
|
|
mox webapi [method [baseurl-with-credentials]
|
|
mox example [name]
|
|
mox bumpuidvalidity account [mailbox]
|
|
mox reassignuids account [mailboxid]
|
|
mox fixuidmeta account
|
|
mox fixmsgsize [account]
|
|
mox reparse [account]
|
|
mox ensureparsed account
|
|
mox recalculatemailboxcounts account
|
|
mox message parse message.eml
|
|
mox reassignthreads [account]
|
|
|
|
# mox serve
|
|
|
|
Start mox, serving SMTP/IMAP/HTTPS.
|
|
|
|
Incoming email is accepted over SMTP. Email can be retrieved by users using
|
|
IMAP. HTTP listeners are started for the admin/account web interfaces, and for
|
|
automated TLS configuration. Missing essential TLS certificates are immediately
|
|
requested, other TLS certificates are requested on demand.
|
|
|
|
Only implemented on unix systems, not Windows.
|
|
|
|
usage: mox serve
|
|
|
|
# mox quickstart
|
|
|
|
Quickstart generates configuration files and prints instructions to quickly set up a mox instance.
|
|
|
|
Quickstart writes configuration files, prints initial admin and account
|
|
passwords, DNS records you should create. If you run it on Linux it writes a
|
|
systemd service file and prints commands to enable and start mox as service.
|
|
|
|
All output is written to quickstart.log for later reference.
|
|
|
|
The user or uid is optional, defaults to "mox", and is the user or uid/gid mox
|
|
will run as after initialization.
|
|
|
|
Quickstart assumes mox will run on the machine you run quickstart on and uses
|
|
its host name and public IPs. On many systems the hostname is not a fully
|
|
qualified domain name, but only the first dns "label", e.g. "mail" in case of
|
|
"mail.example.org". If so, quickstart does a reverse DNS lookup to find the
|
|
hostname, and as fallback uses the label plus the domain of the email address
|
|
you specified. Use flag -hostname to explicitly specify the hostname mox will
|
|
run on.
|
|
|
|
Mox is by far easiest to operate if you let it listen on port 443 (HTTPS) and
|
|
80 (HTTP). TLS will be fully automatic with ACME with Let's Encrypt.
|
|
|
|
You can run mox along with an existing webserver, but because of MTA-STS and
|
|
autoconfig, you'll need to forward HTTPS traffic for two domains to mox. Run
|
|
"mox quickstart -existing-webserver ..." to generate configuration files and
|
|
instructions for configuring mox along with an existing webserver.
|
|
|
|
But please first consider configuring mox on port 443. It can itself serve
|
|
domains with HTTP/HTTPS, including with automatic TLS with ACME, is easily
|
|
configured through both configuration files and admin web interface, and can act
|
|
as a reverse proxy (and static file server for that matter), so you can forward
|
|
traffic to your existing backend applications. Look for "WebHandlers:" in the
|
|
output of "mox config describe-domains" and see the output of
|
|
"mox config example webhandlers".
|
|
|
|
usage: mox quickstart [-skipdial] [-existing-webserver] [-hostname host] user@domain [user | uid]
|
|
-existing-webserver
|
|
use if a webserver is already running, so mox won't listen on port 80 and 443; you'll have to provide tls certificates/keys, and configure the existing webserver as reverse proxy, forwarding requests to mox.
|
|
-hostname string
|
|
hostname mox will run on, by default the hostname of the machine quickstart runs on; if specified, the IPs for the hostname are configured for the public listener
|
|
-skipdial
|
|
skip check for outgoing smtp (port 25) connectivity
|
|
|
|
# mox stop
|
|
|
|
Shut mox down, giving connections maximum 3 seconds to stop before closing them.
|
|
|
|
While shutting down, new IMAP and SMTP connections will get a status response
|
|
indicating temporary unavailability. Existing connections will get a 3 second
|
|
period to finish their transaction and shut down. Under normal circumstances,
|
|
only IMAP has long-living connections, with the IDLE command to get notified of
|
|
new mail deliveries.
|
|
|
|
usage: mox stop
|
|
|
|
# mox setaccountpassword
|
|
|
|
Set new password an account.
|
|
|
|
The password is read from stdin. Secrets derived from the password, but not the
|
|
password itself, are stored in the account database. The stored secrets are for
|
|
authentication with: scram-sha-256, scram-sha-1, cram-md5, plain text (bcrypt
|
|
hash).
|
|
|
|
The parameter is an account name, as configured under Accounts in domains.conf
|
|
and as present in the data/accounts/ directory, not a configured email address
|
|
for an account.
|
|
|
|
usage: mox setaccountpassword account
|
|
|
|
# mox setadminpassword
|
|
|
|
Set a new admin password, for the web interface.
|
|
|
|
The password is read from stdin. Its bcrypt hash is stored in a file named
|
|
"adminpasswd" in the configuration directory.
|
|
|
|
usage: mox setadminpassword
|
|
|
|
# mox loglevels
|
|
|
|
Print the log levels, or set a new default log level, or a level for the given package.
|
|
|
|
By default, a single log level applies to all logging in mox. But for each
|
|
"pkg", an overriding log level can be configured. Examples of packages:
|
|
smtpserver, smtpclient, queue, imapserver, spf, dkim, dmarc, junk, message,
|
|
etc.
|
|
|
|
Specify a pkg and an empty level to clear the configured level for a package.
|
|
|
|
Valid labels: error, info, debug, trace, traceauth, tracedata.
|
|
|
|
usage: mox loglevels [level [pkg]]
|
|
|
|
# mox queue holdrules list
|
|
|
|
List hold rules for the delivery queue.
|
|
|
|
Messages submitted to the queue that match a hold rule will be marked as on hold
|
|
and not scheduled for delivery.
|
|
|
|
usage: mox queue holdrules list
|
|
|
|
# mox queue holdrules add
|
|
|
|
Add hold rule for the delivery queue.
|
|
|
|
Add a hold rule to mark matching newly submitted messages as on hold. Set the
|
|
matching rules with the flags. Don't specify any flags to match all submitted
|
|
messages.
|
|
|
|
usage: mox queue holdrules add [ruleflags]
|
|
-account string
|
|
account submitting the message
|
|
-recipientdom string
|
|
recipient domain
|
|
-senderdom string
|
|
sender domain
|
|
|
|
# mox queue holdrules remove
|
|
|
|
Remove hold rule for the delivery queue.
|
|
|
|
Remove a hold rule by its id.
|
|
|
|
usage: mox queue holdrules remove ruleid
|
|
|
|
# mox queue list
|
|
|
|
List matching messages in the delivery queue.
|
|
|
|
Prints the message with its ID, last and next delivery attempts, last error.
|
|
|
|
usage: mox queue list [filtersortflags]
|
|
-account string
|
|
account that queued the message
|
|
-asc
|
|
sort ascending instead of descending (default)
|
|
-from string
|
|
from address of message, use "@example.com" to match all messages for a domain
|
|
-hold value
|
|
true or false, whether to match only messages that are (not) on hold
|
|
-ids value
|
|
comma-separated list of message IDs
|
|
-n int
|
|
number of messages to return
|
|
-nextattempt string
|
|
filter by time of next delivery attempt relative to now, value must start with "<" (before now) or ">" (after now)
|
|
-sort value
|
|
field to sort by, "nextattempt" (default) or "queued"
|
|
-submitted string
|
|
filter by time of submission relative to now, value must start with "<" (before now) or ">" (after now)
|
|
-to string
|
|
recipient address of message, use "@example.com" to match all messages for a domain
|
|
-transport value
|
|
transport to use for messages, empty string sets the default behaviour
|
|
|
|
# mox queue hold
|
|
|
|
Mark matching messages on hold.
|
|
|
|
Messages that are on hold are not delivered until marked as off hold again, or
|
|
otherwise handled by the admin.
|
|
|
|
usage: mox queue hold [filterflags]
|
|
-account string
|
|
account that queued the message
|
|
-from string
|
|
from address of message, use "@example.com" to match all messages for a domain
|
|
-hold value
|
|
true or false, whether to match only messages that are (not) on hold
|
|
-ids value
|
|
comma-separated list of message IDs
|
|
-n int
|
|
number of messages to return
|
|
-nextattempt string
|
|
filter by time of next delivery attempt relative to now, value must start with "<" (before now) or ">" (after now)
|
|
-submitted string
|
|
filter by time of submission relative to now, value must start with "<" (before now) or ">" (after now)
|
|
-to string
|
|
recipient address of message, use "@example.com" to match all messages for a domain
|
|
-transport value
|
|
transport to use for messages, empty string sets the default behaviour
|
|
|
|
# mox queue unhold
|
|
|
|
Mark matching messages off hold.
|
|
|
|
Once off hold, messages can be delivered according to their current next
|
|
delivery attempt. See the "queue schedule" command.
|
|
|
|
usage: mox queue unhold [filterflags]
|
|
-account string
|
|
account that queued the message
|
|
-from string
|
|
from address of message, use "@example.com" to match all messages for a domain
|
|
-hold value
|
|
true or false, whether to match only messages that are (not) on hold
|
|
-ids value
|
|
comma-separated list of message IDs
|
|
-n int
|
|
number of messages to return
|
|
-nextattempt string
|
|
filter by time of next delivery attempt relative to now, value must start with "<" (before now) or ">" (after now)
|
|
-submitted string
|
|
filter by time of submission relative to now, value must start with "<" (before now) or ">" (after now)
|
|
-to string
|
|
recipient address of message, use "@example.com" to match all messages for a domain
|
|
-transport value
|
|
transport to use for messages, empty string sets the default behaviour
|
|
|
|
# mox queue schedule
|
|
|
|
Change next delivery attempt for matching messages.
|
|
|
|
The next delivery attempt is adjusted by the duration parameter. If the -now
|
|
flag is set, the new delivery attempt is set to the duration added to the
|
|
current time, instead of added to the current scheduled time.
|
|
|
|
Schedule immediate delivery with "mox queue schedule -now 0".
|
|
|
|
usage: mox queue schedule [filterflags] [-now] duration
|
|
-account string
|
|
account that queued the message
|
|
-from string
|
|
from address of message, use "@example.com" to match all messages for a domain
|
|
-hold value
|
|
true or false, whether to match only messages that are (not) on hold
|
|
-ids value
|
|
comma-separated list of message IDs
|
|
-n int
|
|
number of messages to return
|
|
-nextattempt string
|
|
filter by time of next delivery attempt relative to now, value must start with "<" (before now) or ">" (after now)
|
|
-now
|
|
schedule for duration relative to current time instead of relative to current next delivery attempt for messages
|
|
-submitted string
|
|
filter by time of submission relative to now, value must start with "<" (before now) or ">" (after now)
|
|
-to string
|
|
recipient address of message, use "@example.com" to match all messages for a domain
|
|
-transport value
|
|
transport to use for messages, empty string sets the default behaviour
|
|
|
|
# mox queue transport
|
|
|
|
Set transport for matching messages.
|
|
|
|
By default, the routing rules determine how a message is delivered. The default
|
|
and common case is direct delivery with SMTP. Messages can get a previously
|
|
configured transport assigned to use for delivery, e.g. using submission to
|
|
another mail server or with connections over a SOCKS proxy.
|
|
|
|
usage: mox queue transport [filterflags] transport
|
|
-account string
|
|
account that queued the message
|
|
-from string
|
|
from address of message, use "@example.com" to match all messages for a domain
|
|
-hold value
|
|
true or false, whether to match only messages that are (not) on hold
|
|
-ids value
|
|
comma-separated list of message IDs
|
|
-n int
|
|
number of messages to return
|
|
-nextattempt string
|
|
filter by time of next delivery attempt relative to now, value must start with "<" (before now) or ">" (after now)
|
|
-submitted string
|
|
filter by time of submission relative to now, value must start with "<" (before now) or ">" (after now)
|
|
-to string
|
|
recipient address of message, use "@example.com" to match all messages for a domain
|
|
-transport value
|
|
transport to use for messages, empty string sets the default behaviour
|
|
|
|
# mox queue requiretls
|
|
|
|
Set TLS requirements for delivery of matching messages.
|
|
|
|
Value "yes" is handled as if the RequireTLS extension was specified during
|
|
submission.
|
|
|
|
Value "no" is handled as if the message has a header "TLS-Required: No". This
|
|
header is not added by the queue. If messages without this header are relayed
|
|
through other mail servers they will apply their own default TLS policy.
|
|
|
|
Value "default" is the default behaviour, currently for unverified opportunistic
|
|
TLS.
|
|
|
|
usage: mox queue requiretls [filterflags] {yes | no | default}
|
|
-account string
|
|
account that queued the message
|
|
-from string
|
|
from address of message, use "@example.com" to match all messages for a domain
|
|
-hold value
|
|
true or false, whether to match only messages that are (not) on hold
|
|
-ids value
|
|
comma-separated list of message IDs
|
|
-n int
|
|
number of messages to return
|
|
-nextattempt string
|
|
filter by time of next delivery attempt relative to now, value must start with "<" (before now) or ">" (after now)
|
|
-submitted string
|
|
filter by time of submission relative to now, value must start with "<" (before now) or ">" (after now)
|
|
-to string
|
|
recipient address of message, use "@example.com" to match all messages for a domain
|
|
-transport value
|
|
transport to use for messages, empty string sets the default behaviour
|
|
|
|
# mox queue fail
|
|
|
|
Fail delivery of matching messages, delivering DSNs.
|
|
|
|
Failing a message is handled similar to how delivery is given up after all
|
|
delivery attempts failed. The DSN (delivery status notification) message
|
|
contains a line saying the message was canceled by the admin.
|
|
|
|
usage: mox queue fail [filterflags]
|
|
-account string
|
|
account that queued the message
|
|
-from string
|
|
from address of message, use "@example.com" to match all messages for a domain
|
|
-hold value
|
|
true or false, whether to match only messages that are (not) on hold
|
|
-ids value
|
|
comma-separated list of message IDs
|
|
-n int
|
|
number of messages to return
|
|
-nextattempt string
|
|
filter by time of next delivery attempt relative to now, value must start with "<" (before now) or ">" (after now)
|
|
-submitted string
|
|
filter by time of submission relative to now, value must start with "<" (before now) or ">" (after now)
|
|
-to string
|
|
recipient address of message, use "@example.com" to match all messages for a domain
|
|
-transport value
|
|
transport to use for messages, empty string sets the default behaviour
|
|
|
|
# mox queue drop
|
|
|
|
Remove matching messages from the queue.
|
|
|
|
Dangerous operation, this completely removes the message. If you want to store
|
|
the message, use "queue dump" before removing.
|
|
|
|
usage: mox queue drop [filterflags]
|
|
-account string
|
|
account that queued the message
|
|
-from string
|
|
from address of message, use "@example.com" to match all messages for a domain
|
|
-hold value
|
|
true or false, whether to match only messages that are (not) on hold
|
|
-ids value
|
|
comma-separated list of message IDs
|
|
-n int
|
|
number of messages to return
|
|
-nextattempt string
|
|
filter by time of next delivery attempt relative to now, value must start with "<" (before now) or ">" (after now)
|
|
-submitted string
|
|
filter by time of submission relative to now, value must start with "<" (before now) or ">" (after now)
|
|
-to string
|
|
recipient address of message, use "@example.com" to match all messages for a domain
|
|
-transport value
|
|
transport to use for messages, empty string sets the default behaviour
|
|
|
|
# mox queue dump
|
|
|
|
Dump a message from the queue.
|
|
|
|
The message is printed to stdout and is in standard internet mail format.
|
|
|
|
usage: mox queue dump id
|
|
|
|
# mox queue retired list
|
|
|
|
List matching messages in the retired queue.
|
|
|
|
Prints messages with their ID and results.
|
|
|
|
usage: mox queue retired list [filtersortflags]
|
|
-account string
|
|
account that queued the message
|
|
-asc
|
|
sort ascending instead of descending (default)
|
|
-from string
|
|
from address of message, use "@example.com" to match all messages for a domain
|
|
-ids value
|
|
comma-separated list of retired message IDs
|
|
-lastactivity string
|
|
filter by time of last activity relative to now, value must start with "<" (before now) or ">" (after now)
|
|
-n int
|
|
number of messages to return
|
|
-result value
|
|
"success" or "failure" as result of delivery
|
|
-sort value
|
|
field to sort by, "lastactivity" (default) or "queued"
|
|
-submitted string
|
|
filter by time of submission relative to now, value must start with "<" (before now) or ">" (after now)
|
|
-to string
|
|
recipient address of message, use "@example.com" to match all messages for a domain
|
|
-transport value
|
|
transport to use for messages, empty string sets the default behaviour
|
|
|
|
# mox queue retired print
|
|
|
|
Print a message from the retired queue.
|
|
|
|
Prints a JSON representation of the information from the retired queue.
|
|
|
|
usage: mox queue retired print id
|
|
|
|
# mox queue suppress list
|
|
|
|
Print addresses in suppression list.
|
|
|
|
usage: mox queue suppress list [-account account]
|
|
-account string
|
|
only show suppression list for this account
|
|
|
|
# mox queue suppress add
|
|
|
|
Add address to suppression list for account.
|
|
|
|
usage: mox queue suppress add account address
|
|
|
|
# mox queue suppress remove
|
|
|
|
Remove address from suppression list for account.
|
|
|
|
usage: mox queue suppress remove account address
|
|
|
|
# mox queue suppress lookup
|
|
|
|
Check if address is present in suppression list, for any or specific account.
|
|
|
|
usage: mox queue suppress lookup [-account account] address
|
|
-account string
|
|
only check address in specified account
|
|
|
|
# mox queue webhook list
|
|
|
|
List matching webhooks in the queue.
|
|
|
|
Prints list of webhooks, their IDs and basic information.
|
|
|
|
usage: mox queue webhook list [filtersortflags]
|
|
-account string
|
|
account that queued the message/webhook
|
|
-asc
|
|
sort ascending instead of descending (default)
|
|
-event value
|
|
event this webhook is about: incoming, delivered, suppressed, delayed, failed, relayed, expanded, canceled, unrecognized
|
|
-ids value
|
|
comma-separated list of webhook IDs
|
|
-n int
|
|
number of webhooks to return
|
|
-nextattempt string
|
|
filter by time of next delivery attempt relative to now, value must start with "<" (before now) or ">" (after now)
|
|
-sort value
|
|
field to sort by, "nextattempt" (default) or "queued"
|
|
-submitted string
|
|
filter by time of submission relative to now, value must start with "<" (before now) or ">" (after now)
|
|
|
|
# mox queue webhook schedule
|
|
|
|
Change next delivery attempt for matching webhooks.
|
|
|
|
The next delivery attempt is adjusted by the duration parameter. If the -now
|
|
flag is set, the new delivery attempt is set to the duration added to the
|
|
current time, instead of added to the current scheduled time.
|
|
|
|
Schedule immediate delivery with "mox queue schedule -now 0".
|
|
|
|
usage: mox queue webhook schedule [filterflags] duration
|
|
-account string
|
|
account that queued the message/webhook
|
|
-event value
|
|
event this webhook is about: incoming, delivered, suppressed, delayed, failed, relayed, expanded, canceled, unrecognized
|
|
-ids value
|
|
comma-separated list of webhook IDs
|
|
-n int
|
|
number of webhooks to return
|
|
-nextattempt string
|
|
filter by time of next delivery attempt relative to now, value must start with "<" (before now) or ">" (after now)
|
|
-now
|
|
schedule for duration relative to current time instead of relative to current next delivery attempt for webhooks
|
|
-submitted string
|
|
filter by time of submission relative to now, value must start with "<" (before now) or ">" (after now)
|
|
|
|
# mox queue webhook cancel
|
|
|
|
Fail delivery of matching webhooks.
|
|
|
|
usage: mox queue webhook cancel [filterflags]
|
|
-account string
|
|
account that queued the message/webhook
|
|
-event value
|
|
event this webhook is about: incoming, delivered, suppressed, delayed, failed, relayed, expanded, canceled, unrecognized
|
|
-ids value
|
|
comma-separated list of webhook IDs
|
|
-n int
|
|
number of webhooks to return
|
|
-nextattempt string
|
|
filter by time of next delivery attempt relative to now, value must start with "<" (before now) or ">" (after now)
|
|
-submitted string
|
|
filter by time of submission relative to now, value must start with "<" (before now) or ">" (after now)
|
|
|
|
# mox queue webhook print
|
|
|
|
Print details of a webhook from the queue.
|
|
|
|
The webhook is printed to stdout as JSON.
|
|
|
|
usage: mox queue webhook print id
|
|
|
|
# mox queue webhook retired list
|
|
|
|
List matching webhooks in the retired queue.
|
|
|
|
Prints list of retired webhooks, their IDs and basic information.
|
|
|
|
usage: mox queue webhook retired list [filtersortflags]
|
|
-account string
|
|
account that queued the message/webhook
|
|
-asc
|
|
sort ascending instead of descending (default)
|
|
-event value
|
|
event this webhook is about: incoming, delivered, suppressed, delayed, failed, relayed, expanded, canceled, unrecognized
|
|
-ids value
|
|
comma-separated list of retired webhook IDs
|
|
-lastactivity string
|
|
filter by time of last activity relative to now, value must start with "<" (before now) or ">" (after now)
|
|
-n int
|
|
number of webhooks to return
|
|
-sort value
|
|
field to sort by, "lastactivity" (default) or "queued"
|
|
-submitted string
|
|
filter by time of submission relative to now, value must start with "<" (before now) or ">" (after now)
|
|
|
|
# mox queue webhook retired print
|
|
|
|
Print details of a webhook from the retired queue.
|
|
|
|
The retired webhook is printed to stdout as JSON.
|
|
|
|
usage: mox queue webhook retired print id
|
|
|
|
# mox import maildir
|
|
|
|
Import a maildir into an account.
|
|
|
|
The mbox/maildir archive is accessed and imported by the running mox process, so
|
|
it must have access to the archive files. The default suggested systemd service
|
|
file isolates mox from most of the file system, with only the "data/" directory
|
|
accessible, so you may want to put the mbox/maildir archive files in a
|
|
directory like "data/import/" to make it available to mox.
|
|
|
|
By default, messages will train the junk filter based on their flags and, if
|
|
"automatic junk flags" configuration is set, based on mailbox naming.
|
|
|
|
If the destination mailbox is the Sent mailbox, the recipients of the messages
|
|
are added to the message metadata, causing later incoming messages from these
|
|
recipients to be accepted, unless other reputation signals prevent that.
|
|
|
|
Users can also import mailboxes/messages through the account web page by
|
|
uploading a zip or tgz file with mbox and/or maildirs.
|
|
|
|
Messages are imported even if already present. Importing messages twice will
|
|
result in duplicate messages.
|
|
|
|
Mailbox flags, like "seen", "answered", will be imported. An optional
|
|
dovecot-keywords file can specify additional flags, like Forwarded/Junk/NotJunk.
|
|
|
|
usage: mox import maildir accountname mailboxname maildir
|
|
|
|
# mox import mbox
|
|
|
|
Import an mbox into an account.
|
|
|
|
Using mbox is not recommended, maildir is a better defined format.
|
|
|
|
The mbox/maildir archive is accessed and imported by the running mox process, so
|
|
it must have access to the archive files. The default suggested systemd service
|
|
file isolates mox from most of the file system, with only the "data/" directory
|
|
accessible, so you may want to put the mbox/maildir archive files in a
|
|
directory like "data/import/" to make it available to mox.
|
|
|
|
By default, messages will train the junk filter based on their flags and, if
|
|
"automatic junk flags" configuration is set, based on mailbox naming.
|
|
|
|
If the destination mailbox is the Sent mailbox, the recipients of the messages
|
|
are added to the message metadata, causing later incoming messages from these
|
|
recipients to be accepted, unless other reputation signals prevent that.
|
|
|
|
Users can also import mailboxes/messages through the account web page by
|
|
uploading a zip or tgz file with mbox and/or maildirs.
|
|
|
|
Messages are imported even if already present. Importing messages twice will
|
|
result in duplicate messages.
|
|
|
|
usage: mox import mbox accountname mailboxname mbox
|
|
|
|
# mox export maildir
|
|
|
|
Export one or all mailboxes from an account in maildir format.
|
|
|
|
Export bypasses a running mox instance. It opens the account mailbox/message
|
|
database file directly. This may block if a running mox instance also has the
|
|
database open, e.g. for IMAP connections. To export from a running instance, use
|
|
the accounts web page or webmail.
|
|
|
|
usage: mox export maildir [-single] dst-dir account-path [mailbox]
|
|
-single
|
|
export single mailbox, without any children. disabled if mailbox isn't specified.
|
|
|
|
# mox export mbox
|
|
|
|
Export messages from one or all mailboxes in an account in mbox format.
|
|
|
|
Using mbox is not recommended. Maildir is a better format.
|
|
|
|
Export bypasses a running mox instance. It opens the account mailbox/message
|
|
database file directly. This may block if a running mox instance also has the
|
|
database open, e.g. for IMAP connections. To export from a running instance, use
|
|
the accounts web page or webmail.
|
|
|
|
For mbox export, "mboxrd" is used where message lines starting with the magic
|
|
"From " string are escaped by prepending a >. All ">*From " are escaped,
|
|
otherwise reconstructing the original could lose a ">".
|
|
|
|
usage: mox export mbox [-single] dst-dir account-path [mailbox]
|
|
-single
|
|
export single mailbox, without any children. disabled if mailbox isn't specified.
|
|
|
|
# mox localserve
|
|
|
|
Start a local SMTP/IMAP server that accepts all messages, useful when testing/developing software that sends email.
|
|
|
|
Localserve starts mox with a configuration suitable for local email-related
|
|
software development/testing. It listens for SMTP/Submission(s), IMAP(s) and
|
|
HTTP(s), on the regular port numbers + 1000.
|
|
|
|
Data is stored in the system user's configuration directory under
|
|
"mox-localserve", e.g. $HOME/.config/mox-localserve/ on linux, but can be
|
|
overridden with the -dir flag. If the directory does not yet exist, it is
|
|
automatically initialized with configuration files, an account with email
|
|
address mox@localhost and password moxmoxmox, and a newly generated self-signed
|
|
TLS certificate.
|
|
|
|
Incoming messages are delivered as normal, falling back to accepting and
|
|
delivering to the mox account for unknown addresses.
|
|
Submitted messages are added to the queue, which delivers by ignoring the
|
|
destination servers, always connecting to itself instead.
|
|
|
|
Recipient addresses with the following localpart suffixes are handled specially:
|
|
|
|
- "temperror": fail with a temporary error code
|
|
- "permerror": fail with a permanent error code
|
|
- [45][0-9][0-9]: fail with the specific error code
|
|
- "timeout": no response (for an hour)
|
|
|
|
If the localpart begins with "mailfrom" or "rcptto", the error is returned
|
|
during those commands instead of during "data".
|
|
|
|
usage: mox localserve
|
|
-dir string
|
|
configuration storage directory (default "$userconfigdir/mox-localserve")
|
|
-initonly
|
|
write configuration files and exit
|
|
-ip string
|
|
serve on this ip instead of default 127.0.0.1 and ::1. only used when writing configuration, at first launch.
|
|
|
|
# mox help
|
|
|
|
Prints help about matching commands.
|
|
|
|
If multiple commands match, they are listed along with the first line of their help text.
|
|
If a single command matches, its usage and full help text is printed.
|
|
|
|
usage: mox help [command ...]
|
|
|
|
# mox backup
|
|
|
|
Creates a backup of the data directory.
|
|
|
|
Backup creates consistent snapshots of the databases and message files and
|
|
copies other files in the data directory. Empty directories are not copied.
|
|
These files can then be stored elsewhere for long-term storage, or used to fall
|
|
back to should an upgrade fail. Simply copying files in the data directory
|
|
while mox is running can result in unusable database files.
|
|
|
|
Message files never change (they are read-only, though can be removed) and are
|
|
hard-linked so they don't consume additional space. If hardlinking fails, for
|
|
example when the backup destination directory is on a different file system, a
|
|
regular copy is made. Using a destination directory like "data/tmp/backup"
|
|
increases the odds hardlinking succeeds: the default systemd service file
|
|
specifically mounts the data directory, causing attempts to hardlink outside it
|
|
to fail with an error about cross-device linking.
|
|
|
|
All files in the data directory that aren't recognized (i.e. other than known
|
|
database files, message files, an acme directory, the "tmp" directory, etc),
|
|
are stored, but with a warning.
|
|
|
|
Remove files in the destination directory before doing another backup. The
|
|
backup command will not overwrite files, but print and return errors.
|
|
|
|
Exit code 0 indicates the backup was successful. A clean successful backup does
|
|
not print any output, but may print warnings. Use the -verbose flag for
|
|
details, including timing.
|
|
|
|
To restore a backup, first shut down mox, move away the old data directory and
|
|
move an earlier backed up directory in its place, run "mox verifydata",
|
|
possibly with the "-fix" option, and restart mox. After the restore, you may
|
|
also want to run "mox bumpuidvalidity" for each account for which messages in a
|
|
mailbox changed, to force IMAP clients to synchronize mailbox state.
|
|
|
|
Before upgrading, to check if the upgrade will likely succeed, first make a
|
|
backup, then use the new mox binary to run "mox verifydata" on the backup. This
|
|
can change the backup files (e.g. upgrade database files, move away
|
|
unrecognized message files), so you should make a new backup before actually
|
|
upgrading.
|
|
|
|
usage: mox backup dest-dir
|
|
-verbose
|
|
print progress
|
|
|
|
# mox verifydata
|
|
|
|
Verify the contents of a data directory, typically of a backup.
|
|
|
|
Verifydata checks all database files to see if they are valid BoltDB/bstore
|
|
databases. It checks that all messages in the database have a corresponding
|
|
on-disk message file and there are no unrecognized files. If option -fix is
|
|
specified, unrecognized message files are moved away. This may be needed after
|
|
a restore, because messages enqueued or delivered in the future may get those
|
|
message sequence numbers assigned and writing the message file would fail.
|
|
Consistency of message/mailbox UID, UIDNEXT and UIDVALIDITY is verified as
|
|
well.
|
|
|
|
Because verifydata opens the database files, schema upgrades may automatically
|
|
be applied. This can happen if you use a new mox release. It is useful to run
|
|
"mox verifydata" with a new binary before attempting an upgrade, but only on a
|
|
copy of the database files, as made with "mox backup". Before upgrading, make a
|
|
new backup again since "mox verifydata" may have upgraded the database files,
|
|
possibly making them potentially no longer readable by the previous version.
|
|
|
|
usage: mox verifydata data-dir
|
|
-fix
|
|
fix fixable problems, such as moving away message files not referenced by their database
|
|
-skip-size-check
|
|
skip the check for message size
|
|
|
|
# mox licenses
|
|
|
|
Print licenses of mox source code and dependencies.
|
|
|
|
usage: mox licenses
|
|
|
|
# mox config test
|
|
|
|
Parses and validates the configuration files.
|
|
|
|
If valid, the command exits with status 0. If not valid, all errors encountered
|
|
are printed.
|
|
|
|
usage: mox config test
|
|
|
|
# mox config dnscheck
|
|
|
|
Check the DNS records with the configuration for the domain, and print any errors/warnings.
|
|
|
|
usage: mox config dnscheck domain
|
|
|
|
# mox config dnsrecords
|
|
|
|
Prints annotated DNS records as zone file that should be created for the domain.
|
|
|
|
The zone file can be imported into existing DNS software. You should review the
|
|
DNS records, especially if your domain previously/currently has email
|
|
configured.
|
|
|
|
usage: mox config dnsrecords domain
|
|
|
|
# mox config describe-domains
|
|
|
|
Prints an annotated empty configuration for use as domains.conf.
|
|
|
|
The domains configuration file contains the domains and their configuration,
|
|
and accounts and their configuration. This includes the configured email
|
|
addresses. The mox admin web interface, and the mox command line interface, can
|
|
make changes to this file. Mox automatically reloads this file when it changes.
|
|
|
|
Like the static configuration, the example domains.conf printed by this command
|
|
needs modifications to make it valid.
|
|
|
|
usage: mox config describe-domains >domains.conf
|
|
|
|
# mox config describe-static
|
|
|
|
Prints an annotated empty configuration for use as mox.conf.
|
|
|
|
The static configuration file cannot be reloaded while mox is running. Mox has
|
|
to be restarted for changes to the static configuration file to take effect.
|
|
|
|
This configuration file needs modifications to make it valid. For example, it
|
|
may contain unfinished list items.
|
|
|
|
usage: mox config describe-static >mox.conf
|
|
|
|
# mox config account add
|
|
|
|
Add an account with an email address and reload the configuration.
|
|
|
|
Email can be delivered to this address/account. A password has to be configured
|
|
explicitly, see the setaccountpassword command.
|
|
|
|
usage: mox config account add account address
|
|
|
|
# mox config account rm
|
|
|
|
Remove an account and reload the configuration.
|
|
|
|
Email addresses for this account will also be removed, and incoming email for
|
|
these addresses will be rejected.
|
|
|
|
All data for the account will be removed.
|
|
|
|
usage: mox config account rm account
|
|
|
|
# mox config address add
|
|
|
|
Adds an address to an account and reloads the configuration.
|
|
|
|
If address starts with a @ (i.e. a missing localpart), this is a catchall
|
|
address for the domain.
|
|
|
|
usage: mox config address add address account
|
|
|
|
# mox config address rm
|
|
|
|
Remove an address and reload the configuration.
|
|
|
|
Incoming email for this address will be rejected after removing an address.
|
|
|
|
usage: mox config address rm address
|
|
|
|
# mox config domain add
|
|
|
|
Adds a new domain to the configuration and reloads the configuration.
|
|
|
|
The account is used for the postmaster mailboxes the domain, including as DMARC and
|
|
TLS reporting. Localpart is the "username" at the domain for this account. If
|
|
must be set if and only if account does not yet exist.
|
|
|
|
usage: mox config domain add domain account [localpart]
|
|
|
|
# mox config domain rm
|
|
|
|
Remove a domain from the configuration and reload the configuration.
|
|
|
|
This is a dangerous operation. Incoming email delivery for this domain will be
|
|
rejected.
|
|
|
|
usage: mox config domain rm domain
|
|
|
|
# mox config tlspubkey list
|
|
|
|
List TLS public keys for TLS client certificate authentication.
|
|
|
|
If account is absent, the TLS public keys for all accounts are listed.
|
|
|
|
usage: mox config tlspubkey list [account]
|
|
|
|
# mox config tlspubkey get
|
|
|
|
Get a TLS public key for a fingerprint.
|
|
|
|
Prints the type, name, account and address for the key, and the certificate in
|
|
PEM format.
|
|
|
|
usage: mox config tlspubkey get fingerprint
|
|
|
|
# mox config tlspubkey add
|
|
|
|
Add a TLS public key to the account of the given address.
|
|
|
|
The public key is read from the certificate.
|
|
|
|
The optional name is a human-readable descriptive name of the key. If absent,
|
|
the CommonName from the certificate is used.
|
|
|
|
usage: mox config tlspubkey add address [name] < cert.pem
|
|
-no-imap-preauth
|
|
Don't automatically switch new IMAP connections authenticated with this key to "authenticated" state after the TLS handshake. For working around clients that ignore the untagged IMAP PREAUTH response and try to authenticate while already authenticated.
|
|
|
|
# mox config tlspubkey rm
|
|
|
|
Remove TLS public key for fingerprint.
|
|
|
|
usage: mox config tlspubkey rm fingerprint
|
|
|
|
# mox config tlspubkey gen
|
|
|
|
Generate an ed25519 private key and minimal certificate for use a TLS public key and write to files starting with stem.
|
|
|
|
The private key is written to $stem.$timestamp.ed25519privatekey.pkcs8.pem.
|
|
The certificate is written to $stem.$timestamp.certificate.pem.
|
|
The private key and certificate are also written to
|
|
$stem.$timestamp.ed25519privatekey-certificate.pem.
|
|
|
|
The certificate can be added to an account with "mox config account tlspubkey add".
|
|
|
|
The combined file can be used with "mox sendmail".
|
|
|
|
The private key is also written to standard error in raw-url-base64-encoded
|
|
form, also for use with "mox sendmail". The fingerprint is written to standard
|
|
error too, for reference.
|
|
|
|
usage: mox config tlspubkey gen stem
|
|
|
|
# mox config alias list
|
|
|
|
Show aliases (lists) for domain.
|
|
|
|
usage: mox config alias list domain
|
|
|
|
# mox config alias print
|
|
|
|
Print settings and members of alias (list).
|
|
|
|
usage: mox config alias print alias
|
|
|
|
# mox config alias add
|
|
|
|
Add new alias (list) with one or more addresses and public posting enabled.
|
|
|
|
An alias is used for delivering incoming email to multiple recipients. If you
|
|
want to add an address to an account, don't use an alias, just add the address
|
|
to the account.
|
|
|
|
usage: mox config alias add alias@domain rcpt1@domain ...
|
|
|
|
# mox config alias update
|
|
|
|
Update alias (list) configuration.
|
|
|
|
usage: mox config alias update alias@domain [-postpublic false|true -listmembers false|true -allowmsgfrom false|true]
|
|
-allowmsgfrom string
|
|
whether alias address can be used in message from header
|
|
-listmembers string
|
|
whether list members can list members
|
|
-postpublic string
|
|
whether anyone or only list members can post
|
|
|
|
# mox config alias rm
|
|
|
|
Remove alias (list).
|
|
|
|
usage: mox config alias rm alias@domain
|
|
|
|
# mox config alias addaddr
|
|
|
|
Add addresses to alias (list).
|
|
|
|
usage: mox config alias addaddr alias@domain rcpt1@domain ...
|
|
|
|
# mox config alias rmaddr
|
|
|
|
Remove addresses from alias (list).
|
|
|
|
usage: mox config alias rmaddr alias@domain rcpt1@domain ...
|
|
|
|
# mox config describe-sendmail
|
|
|
|
Describe configuration for mox when invoked as sendmail.
|
|
|
|
usage: mox config describe-sendmail >/etc/moxsubmit.conf
|
|
|
|
# mox config printservice
|
|
|
|
Prints a systemd unit service file for mox.
|
|
|
|
This is the same file as generated using quickstart. If the systemd service file
|
|
has changed with a newer version of mox, use this command to generate an up to
|
|
date version.
|
|
|
|
usage: mox config printservice >mox.service
|
|
|
|
# mox config ensureacmehostprivatekeys
|
|
|
|
Ensure host private keys exist for TLS listeners with ACME.
|
|
|
|
In mox.conf, each listener can have TLS configured. Long-lived private key files
|
|
can be specified, which will be used when requesting ACME certificates.
|
|
Configuring these private keys makes it feasible to publish DANE TLSA records
|
|
for the corresponding public keys in DNS, protected with DNSSEC, allowing TLS
|
|
certificate verification without depending on a list of Certificate Authorities
|
|
(CAs). Previous versions of mox did not pre-generate private keys for use with
|
|
ACME certificates, but would generate private keys on-demand. By explicitly
|
|
configuring private keys, they will not change automatedly with new
|
|
certificates, and the DNS TLSA records stay valid.
|
|
|
|
This command looks for listeners in mox.conf with TLS with ACME configured. For
|
|
each missing host private key (of type rsa-2048 and ecdsa-p256) a key is written
|
|
to config/hostkeys/. If a certificate exists in the ACME "cache", its private
|
|
key is copied. Otherwise a new private key is generated. Snippets for manually
|
|
updating/editing mox.conf are printed.
|
|
|
|
After running this command, and updating mox.conf, run "mox config dnsrecords"
|
|
for a domain and create the TLSA DNS records it suggests to enable DANE.
|
|
|
|
usage: mox config ensureacmehostprivatekeys
|
|
|
|
# mox config example
|
|
|
|
List available config examples, or print a specific example.
|
|
|
|
usage: mox config example [name]
|
|
|
|
# mox checkupdate
|
|
|
|
Check if a newer version of mox is available.
|
|
|
|
A single DNS TXT lookup to _updates.xmox.nl tells if a new version is
|
|
available. If so, a changelog is fetched from https://updates.xmox.nl, and the
|
|
individual entries verified with a builtin public key. The changelog is
|
|
printed.
|
|
|
|
usage: mox checkupdate
|
|
|
|
# mox cid
|
|
|
|
Turn an ID from a Received header into a cid, for looking up in logs.
|
|
|
|
A cid is essentially a connection counter initialized when mox starts. Each log
|
|
line contains a cid. Received headers added by mox contain a unique ID that can
|
|
be decrypted to a cid by admin of a mox instance only.
|
|
|
|
usage: mox cid cid
|
|
|
|
# mox clientconfig
|
|
|
|
Print the configuration for email clients for a domain.
|
|
|
|
Sending email is typically not done on the SMTP port 25, but on submission
|
|
ports 465 (with TLS) and 587 (without initial TLS, but usually added to the
|
|
connection with STARTTLS). For IMAP, the port with TLS is 993 and without is
|
|
143.
|
|
|
|
Without TLS/STARTTLS, passwords are sent in clear text, which should only be
|
|
configured over otherwise secured connections, like a VPN.
|
|
|
|
usage: mox clientconfig domain
|
|
|
|
# mox dane dial
|
|
|
|
Dial the address using TLS with certificate verification using DANE.
|
|
|
|
Data is copied between connection and stdin/stdout until either side closes the
|
|
connection.
|
|
|
|
usage: mox dane dial host:port
|
|
-usages string
|
|
allowed usages for dane, comma-separated list (default "pkix-ta,pkix-ee,dane-ta,dane-ee")
|
|
|
|
# mox dane dialmx
|
|
|
|
Connect to MX server for domain using STARTTLS verified with DANE.
|
|
|
|
If no destination host is specified, regular delivery logic is used to find the
|
|
hosts to attempt delivery too. This involves following CNAMEs for the domain,
|
|
looking up MX records, and possibly falling back to the domain name itself as
|
|
host.
|
|
|
|
If a destination host is specified, that is the only candidate host considered
|
|
for dialing.
|
|
|
|
With a list of destinations gathered, each is dialed until a successful SMTP
|
|
session verified with DANE has been initialized, including EHLO and STARTTLS
|
|
commands.
|
|
|
|
Once connected, data is copied between connection and stdin/stdout, until
|
|
either side closes the connection.
|
|
|
|
This command follows the same logic as delivery attempts made from the queue,
|
|
sharing most of its code.
|
|
|
|
usage: mox dane dialmx domain [destination-host]
|
|
-ehlohostname string
|
|
hostname to send in smtp ehlo command (default "localhost")
|
|
|
|
# mox dane makerecord
|
|
|
|
Print TLSA record for given certificate/key and parameters.
|
|
|
|
Valid values:
|
|
- usage: pkix-ta (0), pkix-ee (1), dane-ta (2), dane-ee (3)
|
|
- selector: cert (0), spki (1)
|
|
- matchtype: full (0), sha2-256 (1), sha2-512 (2)
|
|
|
|
Common DANE TLSA record parameters are: dane-ee spki sha2-256, or 3 1 1,
|
|
followed by a sha2-256 hash of the DER-encoded "SPKI" (subject public key info)
|
|
from the certificate. An example DNS zone file entry:
|
|
|
|
_25._tcp.example.com. TLSA 3 1 1 133b919c9d65d8b1488157315327334ead8d83372db57465ecabf53ee5748aee
|
|
|
|
The first usable information from the pem file is used to compose the TLSA
|
|
record. In case of selector "cert", a certificate is required. Otherwise the
|
|
"subject public key info" (spki) of the first certificate or public or private
|
|
key (pkcs#8, pkcs#1 or ec private key) is used.
|
|
|
|
usage: mox dane makerecord usage selector matchtype [certificate.pem | publickey.pem | privatekey.pem]
|
|
|
|
# mox dns lookup
|
|
|
|
Lookup DNS name of given type.
|
|
|
|
Lookup always prints whether the response was DNSSEC-protected.
|
|
|
|
Examples:
|
|
|
|
mox dns lookup ptr 1.1.1.1
|
|
mox dns lookup mx xmox.nl
|
|
mox dns lookup txt _dmarc.xmox.nl.
|
|
mox dns lookup tlsa _25._tcp.xmox.nl
|
|
|
|
usage: mox dns lookup [ptr | mx | cname | ips | a | aaaa | ns | txt | srv | tlsa] name
|
|
|
|
# mox dkim gened25519
|
|
|
|
Generate a new ed25519 key for use with DKIM.
|
|
|
|
Ed25519 keys are much smaller than RSA keys of comparable cryptographic
|
|
strength. This is convenient because of maximum DNS message sizes. At the time
|
|
of writing, not many mail servers appear to support ed25519 DKIM keys though,
|
|
so it is recommended to sign messages with both RSA and ed25519 keys.
|
|
|
|
usage: mox dkim gened25519 >$selector._domainkey.$domain.ed25519.privatekey.pkcs8.pem
|
|
|
|
# mox dkim genrsa
|
|
|
|
Generate a new 2048 bit RSA private key for use with DKIM.
|
|
|
|
The generated file is in PEM format, and has a comment it is generated for use
|
|
with DKIM, by mox.
|
|
|
|
usage: mox dkim genrsa >$selector._domainkey.$domain.rsa2048.privatekey.pkcs8.pem
|
|
|
|
# mox dkim lookup
|
|
|
|
Lookup and print the DKIM record for the selector at the domain.
|
|
|
|
usage: mox dkim lookup selector domain
|
|
|
|
# mox dkim txt
|
|
|
|
Print a DKIM DNS TXT record with the public key derived from the private key read from stdin.
|
|
|
|
The DNS should be configured as a TXT record at $selector._domainkey.$domain.
|
|
|
|
usage: mox dkim txt <$selector._domainkey.$domain.key.pkcs8.pem
|
|
|
|
# mox dkim verify
|
|
|
|
Verify the DKIM signatures in a message and print the results.
|
|
|
|
The message is parsed, and the DKIM-Signature headers are validated. Validation
|
|
of older messages may fail because the DNS records have been removed or changed
|
|
by now, or because the signature header may have specified an expiration time
|
|
that was passed.
|
|
|
|
usage: mox dkim verify message
|
|
|
|
# mox dkim sign
|
|
|
|
Sign a message, adding DKIM-Signature headers based on the domain in the From header.
|
|
|
|
The message is parsed, the domain looked up in the configuration files, and
|
|
DKIM-Signature headers generated. The message is printed with the DKIM-Signature
|
|
headers prepended.
|
|
|
|
usage: mox dkim sign message
|
|
|
|
# mox dmarc lookup
|
|
|
|
Lookup dmarc policy for domain, a DNS TXT record at _dmarc.<domain>, validate and print it.
|
|
|
|
usage: mox dmarc lookup domain
|
|
|
|
# mox dmarc parsereportmsg
|
|
|
|
Parse a DMARC report from an email message, and print its extracted details.
|
|
|
|
DMARC reports are periodically mailed, if requested in the DMARC DNS record of
|
|
a domain. Reports are sent by mail servers that received messages with our
|
|
domain in a From header. This may or may not be legatimate email. DMARC reports
|
|
contain summaries of evaluations of DMARC and DKIM/SPF, which can help
|
|
understand email deliverability problems.
|
|
|
|
usage: mox dmarc parsereportmsg message ...
|
|
|
|
# mox dmarc verify
|
|
|
|
Parse an email message and evaluate it against the DMARC policy of the domain in the From-header.
|
|
|
|
mailfromaddress and helodomain are used for SPF validation. If both are empty,
|
|
SPF validation is skipped.
|
|
|
|
mailfromaddress should be the address used as MAIL FROM in the SMTP session.
|
|
For DSN messages, that address may be empty. The helo domain was specified at
|
|
the beginning of the SMTP transaction that delivered the message. These values
|
|
can be found in message headers.
|
|
|
|
usage: mox dmarc verify remoteip mailfromaddress helodomain < message
|
|
|
|
# mox dmarc checkreportaddrs
|
|
|
|
For each reporting address in the domain's DMARC record, check if it has opted into receiving reports (if needed).
|
|
|
|
A DMARC record can request reports about DMARC evaluations to be sent to an
|
|
email/http address. If the organizational domains of that of the DMARC record
|
|
and that of the report destination address do not match, the destination
|
|
address must opt-in to receiving DMARC reports by creating a DMARC record at
|
|
<dmarcdomain>._report._dmarc.<reportdestdomain>.
|
|
|
|
usage: mox dmarc checkreportaddrs domain
|
|
|
|
# mox dnsbl check
|
|
|
|
Test if IP is in the DNS blocklist of the zone, e.g. bl.spamcop.net.
|
|
|
|
If the IP is in the blocklist, an explanation is printed. This is typically a
|
|
URL with more information.
|
|
|
|
usage: mox dnsbl check zone ip
|
|
|
|
# mox dnsbl checkhealth
|
|
|
|
Check the health of the DNS blocklist represented by zone, e.g. bl.spamcop.net.
|
|
|
|
The health of a DNS blocklist can be checked by querying for 127.0.0.1 and
|
|
127.0.0.2. The second must and the first must not be present.
|
|
|
|
usage: mox dnsbl checkhealth zone
|
|
|
|
# mox mtasts lookup
|
|
|
|
Lookup the MTASTS record and policy for the domain.
|
|
|
|
MTA-STS is a mechanism for a domain to specify if it requires TLS connections
|
|
for delivering email. If a domain has a valid MTA-STS DNS TXT record at
|
|
_mta-sts.<domain> it signals it implements MTA-STS. A policy can then be
|
|
fetched at https://mta-sts.<domain>/.well-known/mta-sts.txt. The policy
|
|
specifies the mode (enforce, testing, none), which MX servers support TLS and
|
|
should be used, and how long the policy can be cached.
|
|
|
|
usage: mox mtasts lookup domain
|
|
|
|
# mox retrain
|
|
|
|
Recreate and retrain the junk filter for the account or all accounts.
|
|
|
|
Useful after having made changes to the junk filter configuration, or if the
|
|
implementation has changed.
|
|
|
|
usage: mox retrain [accountname]
|
|
|
|
# mox sendmail
|
|
|
|
Sendmail is a drop-in replacement for /usr/sbin/sendmail to deliver emails sent by unix processes like cron.
|
|
|
|
If invoked as "sendmail", it will act as sendmail for sending messages. Its
|
|
intention is to let processes like cron send emails. Messages are submitted to
|
|
an actual mail server over SMTP. The destination mail server and credentials are
|
|
configured in /etc/moxsubmit.conf, see mox config describe-sendmail. The From
|
|
message header is rewritten to the configured address. When the addressee
|
|
appears to be a local user, because without @, the message is sent to the
|
|
configured default address.
|
|
|
|
If submitting an email fails, it is added to a directory moxsubmit.failures in
|
|
the user's home directory.
|
|
|
|
Most flags are ignored to fake compatibility with other sendmail
|
|
implementations. A single recipient or the -t flag with a To-header is required.
|
|
With the -t flag, Cc and Bcc headers are not handled specially, so Bcc is not
|
|
removed and the addresses do not receive the email.
|
|
|
|
/etc/moxsubmit.conf should be group-readable and not readable by others and this
|
|
binary should be setgid that group:
|
|
|
|
groupadd moxsubmit
|
|
install -m 2755 -o root -g moxsubmit mox /usr/sbin/sendmail
|
|
touch /etc/moxsubmit.conf
|
|
chown root:moxsubmit /etc/moxsubmit.conf
|
|
chmod 640 /etc/moxsubmit.conf
|
|
# edit /etc/moxsubmit.conf
|
|
|
|
|
|
usage: mox sendmail [-Fname] [ignoredflags] [-t] [<message]
|
|
|
|
# mox spf check
|
|
|
|
Check the status of IP for the policy published in DNS for the domain.
|
|
|
|
IPs may be allowed to send for a domain, or disallowed, and several shades in
|
|
between. If not allowed, an explanation may be provided by the policy. If so,
|
|
the explanation is printed. The SPF mechanism that matched (if any) is also
|
|
printed.
|
|
|
|
usage: mox spf check domain ip
|
|
|
|
# mox spf lookup
|
|
|
|
Lookup the SPF record for the domain and print it.
|
|
|
|
usage: mox spf lookup domain
|
|
|
|
# mox spf parse
|
|
|
|
Parse the record as SPF record. If valid, nothing is printed.
|
|
|
|
usage: mox spf parse txtrecord
|
|
|
|
# mox tlsrpt lookup
|
|
|
|
Lookup the TLSRPT record for the domain.
|
|
|
|
A TLSRPT record typically contains an email address where reports about TLS
|
|
connectivity should be sent. Mail servers attempting delivery to our domain
|
|
should attempt to use TLS. TLSRPT lets them report how many connection
|
|
successfully used TLS, and how what kind of errors occurred otherwise.
|
|
|
|
usage: mox tlsrpt lookup domain
|
|
|
|
# mox tlsrpt parsereportmsg
|
|
|
|
Parse and print the TLSRPT in the message.
|
|
|
|
The report is printed in formatted JSON.
|
|
|
|
usage: mox tlsrpt parsereportmsg message ...
|
|
|
|
# mox version
|
|
|
|
Prints this mox version.
|
|
|
|
usage: mox version
|
|
|
|
# mox webapi
|
|
|
|
Lists available methods, prints request/response parameters for method, or calls a method with a request read from standard input.
|
|
|
|
usage: mox webapi [method [baseurl-with-credentials]
|
|
|
|
# mox example
|
|
|
|
List available examples, or print a specific example.
|
|
|
|
usage: mox example [name]
|
|
|
|
# mox bumpuidvalidity
|
|
|
|
Change the IMAP UID validity of the mailbox, causing IMAP clients to refetch messages.
|
|
|
|
This can be useful after manually repairing metadata about the account/mailbox.
|
|
|
|
Opens account database file directly. Ensure mox does not have the account
|
|
open, or is not running.
|
|
|
|
usage: mox bumpuidvalidity account [mailbox]
|
|
|
|
# mox reassignuids
|
|
|
|
Reassign UIDs in one mailbox or all mailboxes in an account and bump UID validity, causing IMAP clients to refetch messages.
|
|
|
|
Opens account database file directly. Ensure mox does not have the account
|
|
open, or is not running.
|
|
|
|
usage: mox reassignuids account [mailboxid]
|
|
|
|
# mox fixuidmeta
|
|
|
|
Fix inconsistent UIDVALIDITY and UIDNEXT in messages/mailboxes/account.
|
|
|
|
The next UID to use for a message in a mailbox should always be higher than any
|
|
existing message UID in the mailbox. If it is not, the mailbox UIDNEXT is
|
|
updated.
|
|
|
|
Each mailbox has a UIDVALIDITY sequence number, which should always be lower
|
|
than the per-account next UIDVALIDITY to use. If it is not, the account next
|
|
UIDVALIDITY is updated.
|
|
|
|
Opens account database file directly. Ensure mox does not have the account
|
|
open, or is not running.
|
|
|
|
usage: mox fixuidmeta account
|
|
|
|
# mox fixmsgsize
|
|
|
|
Ensure message sizes in the database matching the sum of the message prefix length and on-disk file size.
|
|
|
|
Messages with an inconsistent size are also parsed again.
|
|
|
|
If an inconsistency is found, you should probably also run "mox
|
|
bumpuidvalidity" on the mailboxes or entire account to force IMAP clients to
|
|
refetch messages.
|
|
|
|
usage: mox fixmsgsize [account]
|
|
|
|
# mox reparse
|
|
|
|
Parse all messages in the account or all accounts again.
|
|
|
|
Can be useful after upgrading mox with improved message parsing. Messages are
|
|
parsed in batches, so other access to the mailboxes/messages are not blocked
|
|
while reparsing all messages.
|
|
|
|
usage: mox reparse [account]
|
|
|
|
# mox ensureparsed
|
|
|
|
Ensure messages in the database have a pre-parsed MIME form in the database.
|
|
|
|
usage: mox ensureparsed account
|
|
-all
|
|
store new parsed message for all messages
|
|
|
|
# mox recalculatemailboxcounts
|
|
|
|
Recalculate message counts for all mailboxes in the account, and total message size for quota.
|
|
|
|
When a message is added to/removed from a mailbox, or when message flags change,
|
|
the total, unread, unseen and deleted messages are accounted, the total size of
|
|
the mailbox, and the total message size for the account. In case of a bug in
|
|
this accounting, the numbers could become incorrect. This command will find, fix
|
|
and print them.
|
|
|
|
usage: mox recalculatemailboxcounts account
|
|
|
|
# mox message parse
|
|
|
|
Parse message, print JSON representation.
|
|
|
|
usage: mox message parse message.eml
|
|
-smtputf8
|
|
check if message needs smtputf8
|
|
|
|
# mox reassignthreads
|
|
|
|
Reassign message threads.
|
|
|
|
For all accounts, or optionally only the specified account.
|
|
|
|
Threading for all messages in an account is first reset, and new base subject
|
|
and normalized message-id saved with the message. Then all messages are
|
|
evaluated and matched against their parents/ancestors.
|
|
|
|
Messages are matched based on the References header, with a fall-back to an
|
|
In-Reply-To header, and if neither is present/valid, based only on base
|
|
subject.
|
|
|
|
A References header typically points to multiple previous messages in a
|
|
hierarchy. From oldest ancestor to most recent parent. An In-Reply-To header
|
|
would have only a message-id of the parent message.
|
|
|
|
A message is only linked to a parent/ancestor if their base subject is the
|
|
same. This ensures unrelated replies, with a new subject, are placed in their
|
|
own thread.
|
|
|
|
The base subject is lower cased, has whitespace collapsed to a single
|
|
space, and some components removed: leading "Re:", "Fwd:", "Fw:", or bracketed
|
|
tag (that mailing lists often add, e.g. "[listname]"), trailing "(fwd)", or
|
|
enclosing "[fwd: ...]".
|
|
|
|
Messages are linked to all their ancestors. If an intermediate parent/ancestor
|
|
message is deleted in the future, the message can still be linked to the earlier
|
|
ancestors. If the direct parent already wasn't available while matching, this is
|
|
stored as the message having a "missing link" to its stored ancestors.
|
|
|
|
usage: mox reassignthreads [account]
|
|
*/
|
|
package main
|
|
|
|
// NOTE: DO NOT EDIT, this file is generated by gendoc.sh.
|