the imap & smtp servers now allow logging in with tls client authentication and
the "external" sasl authentication mechanism. email clients like thunderbird,
fairemail, k9, macos mail implement it. this seems to be the most secure among
the authentication mechanism commonly implemented by clients. a useful property
is that an account can have a separate tls public key for each device/email
client. with tls client cert auth, authentication is also bound to the tls
connection. a mitm cannot pass the credentials on to another tls connection,
similar to scram-*-plus. though part of scram-*-plus is that clients verify
that the server knows the client credentials.
for tls client auth with imap, we send a "preauth" untagged message by default.
that puts the connection in authenticated state. given the imap connection
state machine, further authentication commands are not allowed. some clients
don't recognize the preauth message, and try to authenticate anyway, which
fails. a tls public key has a config option to disable preauth, keeping new
connections in unauthenticated state, to work with such email clients.
for smtp (submission), we don't require an explicit auth command.
both for imap and smtp, we allow a client to authenticate with another
mechanism than "external". in that case, credentials are verified, and have to
be for the same account as the tls client auth, but the adress can be another
one than the login address configured with the tls public key.
only the public key is used to identify the account that is authenticating. we
ignore the rest of the certificate. expiration dates, names, constraints, etc
are not verified. no certificate authorities are involved.
users can upload their own (minimal) certificate. the account web interface
shows openssl commands you can run to generate a private key, minimal cert, and
a p12 file (the format that email clients seem to like...) containing both
private key and certificate.
the imapclient & smtpclient packages can now also use tls client auth. and so
does "mox sendmail", either with a pem file with private key and certificate,
or with just an ed25519 private key.
there are new subcommands "mox config tlspubkey ..." for
adding/removing/listing tls public keys from the cli, by the admin.
if icloud.com has your ip blocklisted, it will close the smtp connection after
writing a response to RCPT TO, before writing a response to a pipelined DATA
command. this is similar to the case (already handled) where a mail server
would close the connection after a response to MAIL FROM when pipelined.
we now recognize this situation (unexpected EOF before we get a response to
DATA, with all RCPT TO's failed), and treat the last response to RCPT TO as the
result.
for issue #198 by soheilpro, thanks for reporting and sending an smtpclient
trace that showed the behaviour.
by setting the loglevel to debug in package mlog.
we restore the "info" logging in main.
except for "mox localserve", which still sets debug by default.
The `TransportDirect` transport allows to tweak outgoing SMTP
connections to remote servers. Currently, it only allows to select
network IP family (ipv4, ipv6 or both).
For example, to disable ipv6 for all outgoing SMTP connections:
- add these lines in mox.conf to create a new transport named
"disableipv6":
```
Transports:
disableipv6:
Direct:
DisableIpv6: true
```
- then add these lines in domains.conf to use this transport:
```
Routes:
-
Transport: disableipv6
```
fix#149
transferring the data only once. we only do this when the recipient domains
are the same. when queuing, we now take care to set the same NextAttempt
timestamp, so queued messages are actually eligable for combined delivery.
this adds a DeliverMultiple to the smtp client. for pipelined requests, it will
send all RCPT TO (and MAIL and DATA) in one go, and handles the various
responses and error conditions, returning either an overal error, or per
recipient smtp responses. the results of the smtp LIMITS extension are also
available in the smtp client now.
this also takes the "LIMITS RCPTMAX" smtp extension into account: if the server
only accepts a single recipient, we won't send multiple.
if a server doesn't announce a RCPTMAX limit, but still has one (like mox does
for non-spf-verified transactions), we'll recognize code 452 and 552 (for
historic reasons) as temporary error, and try again in a separate transaction
immediately after. we don't yet implement "LIMITS MAILMAX", doesn't seem likely
in practice.
have the full smtp reply in the Diagnostic-Code field, not something that
resembles it but isn't quite the same.
include any additional error message in the Status field as comment.
before, we ended up having an Diagnostic-Code that didn't include the original
smtp code. it only had the enhanced error code.
we now keep track of the full smtp error responses, potentially multi-line. and
we include it in a dsn in the first free-form human-readable text.
it can have multiple lines in practice, e.g. when a destination mail server
tries to be helpful in explaining what the problem is.
to get the security benefits (detecting mitm attempts), explicitly configure
clients to use a scram plus variant, e.g. scram-sha-256-plus. unfortunately,
not many clients support it yet.
imapserver scram plus support seems to work with the latest imtest (imap test
client) from cyrus-sasl. no success yet with mutt (with gsasl) though.
- prometheus is now behind an interface, they aren't dependencies for the
reusable components anymore.
- some dependencies have been inverted: instead of packages importing a main
package to get configuration, the main package now sets configuration in
these packages. that means fewer internals are pulled in.
- some functions now have new parameters for values that were retrieved from
package "mox-".
we don't want external software to include internal details like mlog.
slog.Logger is/will be the standard.
we still have mlog for its helper functions, and its handler that logs in
concise logfmt used by mox.
packages that are not meant for reuse still pass around mlog.Log for
convenience.
we use golang.org/x/exp/slog because we also support the previous Go toolchain
version. with the next Go release, we'll switch to the builtin slog.
- dmarc reports: add a cid to the log line about one run of sending reports, and log line for each report
- in smtpclient, also handle tls errors from the first read after a handshake. we appear to sometimes get tls alerts about bad certificates on the first read.
- for messages to dmarc/tls reporting addresses that we think should/can not be processed as reports, add an X-Mox- header explaining the reason.
- tls reports: send report messages with From address of postmaster at an actually configured domain for the mail host. and only send reports when dkim signing is configured for that domain. the domain is also the submitter domain. the rfc seems to require dkim-signing with an exact match with the message from and submitter.
- for incoming tls reports, in the smtp server, we do allow a dkim-signature domain that is higher-level (up to publicsuffix) of the message from domain. so we are stricter in what we send than what we receive.
we were already accepting, processing and displaying incoming tls reports. now
we start tracking TLS connection and security-policy-related errors for
outgoing message deliveries as well. we send reports once a day, to the
reporting addresses specified in TLSRPT records (rua) of a policy domain. these
reports are about MTA-STS policies and/or DANE policies, and about
STARTTLS-related failures.
sending reports is enabled by default, but can be disabled through setting
NoOutgoingTLSReports in mox.conf.
only at the end of the implementation process came the realization that the
TLSRPT policy domain for DANE (MX) hosts are separate from the TLSRPT policy
for the recipient domain, and that MTA-STS and DANE TLS/policy results are
typically delivered in separate reports. so MX hosts need their own TLSRPT
policies.
config for the per-host TLSRPT policy should be added to mox.conf for existing
installs, in field HostTLSRPT. it is automatically configured by quickstart for
new installs. with a HostTLSRPT config, the "dns records" and "dns check" admin
pages now suggest the per-host TLSRPT record. by creating that record, you're
requesting TLS reports about your MX host.
gathering all the TLS/policy results is somewhat tricky. the tentacles go
throughout the code. the positive result is that the TLS/policy-related code
had to be cleaned up a bit. for example, the smtpclient TLS modes now reflect
reality better, with independent settings about whether PKIX and/or DANE
verification has to be done, and/or whether verification errors have to be
ignored (e.g. for tls-required: no header). also, cached mtasts policies of
mode "none" are now cleaned up once the MTA-STS DNS record goes away.
the underscores aren't valid, but have been seen in the wild, so we have a
workaround for them. there are limitations, it won't work with idna domains.
and if the domain has other policies, like mta-sts, the mx host won't pass
either.
after report from richard g about delivery issue, thanks!
with requiretls, the tls verification mode/rules for email deliveries can be
changed by the sender/submitter. in two ways:
1. "requiretls" smtp extension to always enforce verified tls (with mta-sts or
dnssec+dane), along the entire delivery path until delivery into the final
destination mailbox (so entire transport is verified-tls-protected).
2. "tls-required: no" message header, to ignore any tls and tls verification
errors even if the recipient domain has a policy that requires tls verification
(mta-sts and/or dnssec+dane), allowing delivery of non-sensitive messages in
case of misconfiguration/interoperability issues (at least useful for sending
tls reports).
we enable requiretls by default (only when tls is active), for smtp and
submission. it can be disabled through the config.
for each delivery attempt, we now store (per recipient domain, in the account
of the sender) whether the smtp server supports starttls and requiretls. this
support is shown (after having sent a first message) in the webmail when
sending a message (the previous 3 bars under the address input field are now 5
bars, the first for starttls support, the last for requiretls support). when
all recipient domains for a message are known to implement requiretls,
requiretls is automatically selected for sending (instead of "default" tls
behaviour). users can also select the "fallback to insecure" to add the
"tls-required: no" header.
new metrics are added for insight into requiretls errors and (some, not yet
all) cases where tls-required-no ignored a tls/verification error.
the admin can change the requiretls status for messages in the queue. so with
default delivery attempts, when verified tls is required by failing, an admin
could potentially change the field to "tls-required: no"-behaviour.
messages received (over smtp) with the requiretls option, get a comment added
to their Received header line, just before "id", after "with".
the vendored dns resolver code is a copy of the go stdlib dns resolver, with
awareness of the "authentic data" (i.e. dnssec secure) added, as well as support
for enhanced dns errors, and looking up tlsa records (for dane). ideally it
would be upstreamed, but the chances seem slim.
dnssec-awareness is added to all packages, e.g. spf, dkim, dmarc, iprev. their
dnssec status is added to the Received message headers for incoming email.
but the main reason to add dnssec was for implementing dane. with dane, the
verification of tls certificates can be done through certificates/public keys
published in dns (in the tlsa records). this only makes sense (is trustworthy)
if those dns records can be verified to be authentic.
mox now applies dane to delivering messages over smtp. mox already implemented
mta-sts for webpki/pkix-verification of certificates against the (large) pool
of CA's, and still enforces those policies when present. but it now also checks
for dane records, and will verify those if present. if dane and mta-sts are
both absent, the regular opportunistic tls with starttls is still done. and the
fallback to plaintext is also still done.
mox also makes it easy to setup dane for incoming deliveries, so other servers
can deliver with dane tls certificate verification. the quickstart now
generates private keys that are used when requesting certificates with acme.
the private keys are pre-generated because they must be static and known during
setup, because their public keys must be published in tlsa records in dns.
autocert would generate private keys on its own, so had to be forked to add the
option to provide the private key when requesting a new certificate. hopefully
upstream will accept the change and we can drop the fork.
with this change, using the quickstart to setup a new mox instance, the checks
at internet.nl result in a 100% score, provided the domain is dnssec-signed and
the network doesn't have any issues.
increase() and rate() don't seem to assume a previous value of 0 when a vector
gets a first value for a label. you would think that an increase() on a
first-value mox_panic_total{"..."}=1 would return 1, and similar for rate(), but
that doesn't appear to be the behaviour. so we just explicitly initialize the
count to 0 for each possible label value. mox has more vector metrics, but
panics feels like the most important, and it's too much code to initialize them
all, for all combinations of label values. there is probably a better way that
fixes this for all cases...
the default transport is still just "direct delivery", where we connect to the
destination domain's MX servers.
other transports are:
- regular smtp without authentication, this is relaying to a smarthost.
- submission with authentication, e.g. to a third party email sending service.
- direct delivery, but with with connections going through a socks proxy. this
can be helpful if your ip is blocked, you need to get email out, and you have
another IP that isn't blocked.
keep in mind that for all of the above, appropriate SPF/DKIM settings have to
be configured. the "dnscheck" for a domain does a check for any SOCKS IP in the
SPF record. SPF for smtp/submission (ranges? includes?) and any DKIM
requirements cannot really be checked.
which transport is used can be configured through routes. routes can be set on
an account, a domain, or globally. the routes are evaluated in that order, with
the first match selecting the transport. these routes are evaluated for each
delivery attempt. common selection criteria are recipient domain and sender
domain, but also which delivery attempt this is. you could configured mox to
attempt sending through a 3rd party from the 4th attempt onwards.
routes and transports are optional. if no route matches, or an empty/zero
transport is selected, normal direct delivery is done.
we could already "submit" emails with 3rd party accounts with "sendmail". but
we now support more SASL authentication mechanisms with SMTP (not only PLAIN,
but also SCRAM-SHA-256, SCRAM-SHA-1 and CRAM-MD5), which sendmail now also
supports. sendmail will use the most secure mechanism supported by the server,
or the explicitly configured mechanism.
for issue #36 by dmikushin. also based on earlier discussion on hackernews.
i wondered why self-signed mtasts certs didn't result in delivery failure. it's
because it was a first-time request of the mtasts policy (clean test
container). and for that case it means mtasts should be ignored.
e.g. when outlook.com puts your IP on a blocklist, it will respond with 550 to
MAIL FROM, then closes the connection (without responding to the remaining
commands). we were reading the 550 response, not yet acting on it, then reading
the response to RCPT TO. that read failed, and we would return that error. now,
we will properly return the 550 (permanent error, instead of the temporary read
error) from the first MAIL FROM (but we do still always try to read the
response for RCPT TO and DATA).
if you start delivering, openbsd's spamd will not announce 8bitmime support.
but once you get patched through to the actual mail server, it will likely
announce 8bitmime support.
perhaps we should also just attempt to deliver 8bit email without 8bitmime
extension. probably better for users than not even trying to send the message.
perhaps in a non-strict mode.
named "traceauth" and "tracedata".
with this, you can (almost) enable trace logging without fear of logging
sensitive data or ddos'ing your log server.
the caveat is that the imap login command has already printed the line as
regular trace before we can decide it should not be. can be fixed soon.
