it's the responsibility of the sender to use unique fromid's.
we do check if that's the case, and return an error if not.
also make it more clear that "unique smtp mail from addresses" map to the
"FromIDLoginAddresses" account config field.
based on feedback from cuu508 for #31, thanks!
before, the smtpserver that queued a dsn would set an empty senderaccount,
which was interpreted in a few places as the globally configured postmaster
cacount. the empty senderaccount would be used by the smtpserver that queued a
dsn with null return path. we now set the postmaster account when we add a
message to the queue. more code in the queue pretty much needs a non-empty
senderaccount, such as the filters when listing, and the suppression list.
instead of skipping on any smtp and delivering messages to accounts.
we dial the ip of the smtp listener, which is localhost:1025 by default.
the smtp server now uses a mock dns resolver during spf & dkim verification for
hosted domains (localhost by default), so they should pass.
the advantage is that we get regular full smtp server behaviour for delivering
in localserve, including webhooks, and potential first-time sender delays
(though this is disabled by default now).
incoming deliveries now go through normal address resolution, where before we
would always deliver to mox@localhost. we still accept email for unknown
recipients to mox@localhost.
this will be useful upcoming alias/list functionality.
localserve will now generate a dkim key when creating a new config. existing
users may wish to reset (remove) their localserve directory, or add a dkim key.
time.Now() returns a timestamp with timezone Local. if you marshal & unmarshal
it again, it'll get the Local timezone again. unless the local timezone is UTC.
then it will get the UTC timezone. the same time.Time but with explicit UTC
timezone vs explicit UTC-as-Local timezone are not the same when comparing with
==. so comparison should be done with time.Time.Equal, or comparison should be
done after having called .Local() on parsed timestamps (so the explicit UTC
timezone gets converted to the UTC-as-Local timezone). somewhat surprising that
time.Local isn't the same as time.UTC if TZ=/TZ=UTC. there are warnings
throughout the time package about handling of UTC.
for applications to compose/send messages, receive delivery feedback, and
maintain suppression lists.
this is an alternative to applications using a library to compose messages,
submitting those messages using smtp, and monitoring a mailbox with imap for
DSNs, which can be processed into the equivalent of suppression lists. but you
need to know about all these standards/protocols and find libraries. by using
the webapi & webhooks, you just need a http & json library.
unfortunately, there is no standard for these kinds of api, so mox has made up
yet another one...
matching incoming DSNs about deliveries to original outgoing messages requires
keeping history of "retired" messages (delivered from the queue, either
successfully or failed). this can be enabled per account. history is also
useful for debugging deliveries. we now also keep history of each delivery
attempt, accessible while still in the queue, and kept when a message is
retired. the queue webadmin pages now also have pagination, to show potentially
large history.
a queue of webhook calls is now managed too. failures are retried similar to
message deliveries. webhooks can also be saved to the retired list after
completing. also configurable per account.
messages can be sent with a "unique smtp mail from" address. this can only be
used if the domain is configured with a localpart catchall separator such as
"+". when enabled, a queued message gets assigned a random "fromid", which is
added after the separator when sending. when DSNs are returned, they can be
related to previously sent messages based on this fromid. in the future, we can
implement matching on the "envid" used in the smtp dsn extension, or on the
"message-id" of the message. using a fromid can be triggered by authenticating
with a login email address that is configured as enabling fromid.
suppression lists are automatically managed per account. if a delivery attempt
results in certain smtp errors, the destination address is added to the
suppression list. future messages queued for that recipient will immediately
fail without a delivery attempt. suppression lists protect your mail server
reputation.
submitted messages can carry "extra" data through the queue and webhooks for
outgoing deliveries. through webapi as a json object, through smtp submission
as message headers of the form "x-mox-extra-<key>: value".
to make it easy to test webapi/webhooks locally, the "localserve" mode actually
puts messages in the queue. when it's time to deliver, it still won't do a full
delivery attempt, but just delivers to the sender account. unless the recipient
address has a special form, simulating a failure to deliver.
admins now have more control over the queue. "hold rules" can be added to mark
newly queued messages as "on hold", pausing delivery. rules can be about
certain sender or recipient domains/addresses, or apply to all messages pausing
the entire queue. also useful for (local) testing.
new config options have been introduced. they are editable through the admin
and/or account web interfaces.
the webapi http endpoints are enabled for newly generated configs with the
quickstart, and in localserve. existing configurations must explicitly enable
the webapi in mox.conf.
gopherwatch.org was created to dogfood this code. it initially used just the
compose/smtpclient/imapclient mox packages to send messages and process
delivery feedback. it will get a config option to use the mox webapi/webhooks
instead. the gopherwatch code to use webapi/webhook is smaller and simpler, and
developing that shaped development of the mox webapi/webhooks.
for issue #31 by cuu508
mox was already giving another try for received errors after the
`HELO`/`EHLO` command. Now mox do the same for received errors when
trying to deliver the message to the remote SMTP server.
This should help to deliver messages to SMTP server that rejects
incoming messages because of bad ipv4 or ipv6 configuration (for example
for servers checking reverse DNS records). mox will now try to deliver
messages on both ip family instead before considering the error as
permanent.
fix#149
The `TransportDirect` transport allows to tweak outgoing SMTP
connections to remote servers. Currently, it only allows to select
network IP family (ipv4, ipv6 or both).
For example, to disable ipv6 for all outgoing SMTP connections:
- add these lines in mox.conf to create a new transport named
"disableipv6":
```
Transports:
disableipv6:
Direct:
DisableIpv6: true
```
- then add these lines in domains.conf to use this transport:
```
Routes:
-
Transport: disableipv6
```
fix#149
- add option to put messages in the queue "on hold", preventing delivery
attempts until taken off hold again.
- add "hold rules", to automatically mark some/all submitted messages as "on
hold", e.g. from a specific account or to a specific domain.
- add operation to "fail" a message, causing a DSN to be delivered to the
sender. previously we could only drop a message from the queue.
- update admin page & add new cli tools for these operations, with new
filtering rules for selecting the messages to operate on. in the admin
interface, add filtering and checkboxes to select a set of messages to operate
on.
before, an error about an invalid address was not used, causing a delivery
attempt to an empty address (empty localpart/domain). delivery to that address
would fail, but we should've prevented that message from being queued at all.
additionally, an error in adding the message to the queue was ignored too.
transferring the data only once. we only do this when the recipient domains
are the same. when queuing, we now take care to set the same NextAttempt
timestamp, so queued messages are actually eligable for combined delivery.
this adds a DeliverMultiple to the smtp client. for pipelined requests, it will
send all RCPT TO (and MAIL and DATA) in one go, and handles the various
responses and error conditions, returning either an overal error, or per
recipient smtp responses. the results of the smtp LIMITS extension are also
available in the smtp client now.
this also takes the "LIMITS RCPTMAX" smtp extension into account: if the server
only accepts a single recipient, we won't send multiple.
if a server doesn't announce a RCPTMAX limit, but still has one (like mox does
for non-spf-verified transactions), we'll recognize code 452 and 552 (for
historic reasons) as temporary error, and try again in a separate transaction
immediately after. we don't yet implement "LIMITS MAILMAX", doesn't seem likely
in practice.
so you can still know when someone has put you on their blocklist (which may
affect delivery), without using them.
also query dnsbls for our ips more often when we do more outgoing connections
for delivery: once every 100 messages, but at least 5 mins and at most 3 hours
since the previous check.
have the full smtp reply in the Diagnostic-Code field, not something that
resembles it but isn't quite the same.
include any additional error message in the Status field as comment.
before, we ended up having an Diagnostic-Code that didn't include the original
smtp code. it only had the enhanced error code.
we now keep track of the full smtp error responses, potentially multi-line. and
we include it in a dsn in the first free-form human-readable text.
it can have multiple lines in practice, e.g. when a destination mail server
tries to be helpful in explaining what the problem is.
the smtp extension, rfc 4865.
also implement in the webmail.
the queueing/delivery part hardly required changes: we just set the first
delivery time in the future instead of immediately.
still have to find the first client that implements it.
to get the security benefits (detecting mitm attempts), explicitly configure
clients to use a scram plus variant, e.g. scram-sha-256-plus. unfortunately,
not many clients support it yet.
imapserver scram plus support seems to work with the latest imtest (imap test
client) from cyrus-sasl. no success yet with mutt (with gsasl) though.
- prometheus is now behind an interface, they aren't dependencies for the
reusable components anymore.
- some dependencies have been inverted: instead of packages importing a main
package to get configuration, the main package now sets configuration in
these packages. that means fewer internals are pulled in.
- some functions now have new parameters for values that were retrieved from
package "mox-".
we don't want external software to include internal details like mlog.
slog.Logger is/will be the standard.
we still have mlog for its helper functions, and its handler that logs in
concise logfmt used by mox.
packages that are not meant for reuse still pass around mlog.Log for
convenience.
we use golang.org/x/exp/slog because we also support the previous Go toolchain
version. with the next Go release, we'll switch to the builtin slog.
for reporting addresses that cause DSNs to be returned. that just adds noise.
the admin can add/remove/extend addresses through the webadmin.
in the future, we could send reports with a smtp mail from of
"postmaster+<signed-encoded-recipient>@...", and add the reporting recipient
on the suppression list automatically when a DSN comes in on that address, but
for now this will probably do.
we were already accepting, processing and displaying incoming tls reports. now
we start tracking TLS connection and security-policy-related errors for
outgoing message deliveries as well. we send reports once a day, to the
reporting addresses specified in TLSRPT records (rua) of a policy domain. these
reports are about MTA-STS policies and/or DANE policies, and about
STARTTLS-related failures.
sending reports is enabled by default, but can be disabled through setting
NoOutgoingTLSReports in mox.conf.
only at the end of the implementation process came the realization that the
TLSRPT policy domain for DANE (MX) hosts are separate from the TLSRPT policy
for the recipient domain, and that MTA-STS and DANE TLS/policy results are
typically delivered in separate reports. so MX hosts need their own TLSRPT
policies.
config for the per-host TLSRPT policy should be added to mox.conf for existing
installs, in field HostTLSRPT. it is automatically configured by quickstart for
new installs. with a HostTLSRPT config, the "dns records" and "dns check" admin
pages now suggest the per-host TLSRPT record. by creating that record, you're
requesting TLS reports about your MX host.
gathering all the TLS/policy results is somewhat tricky. the tentacles go
throughout the code. the positive result is that the TLS/policy-related code
had to be cleaned up a bit. for example, the smtpclient TLS modes now reflect
reality better, with independent settings about whether PKIX and/or DANE
verification has to be done, and/or whether verification errors have to be
ignored (e.g. for tls-required: no header). also, cached mtasts policies of
mode "none" are now cleaned up once the MTA-STS DNS record goes away.
firstly by using crypto/rand in those cases. and secondly by putting a lock
around the Read (though it isn't used at the moment).
found while working while implementing sending tls reports.
in smtpserver, we store dmarc evaluations (under the right conditions).
in dmarcdb, we periodically (hourly) send dmarc reports if there are
evaluations. for failed deliveries, we deliver the dsn quietly to a submailbox
of the postmaster mailbox.
this is on by default, but can be disabled in mox.conf.
with requiretls, the tls verification mode/rules for email deliveries can be
changed by the sender/submitter. in two ways:
1. "requiretls" smtp extension to always enforce verified tls (with mta-sts or
dnssec+dane), along the entire delivery path until delivery into the final
destination mailbox (so entire transport is verified-tls-protected).
2. "tls-required: no" message header, to ignore any tls and tls verification
errors even if the recipient domain has a policy that requires tls verification
(mta-sts and/or dnssec+dane), allowing delivery of non-sensitive messages in
case of misconfiguration/interoperability issues (at least useful for sending
tls reports).
we enable requiretls by default (only when tls is active), for smtp and
submission. it can be disabled through the config.
for each delivery attempt, we now store (per recipient domain, in the account
of the sender) whether the smtp server supports starttls and requiretls. this
support is shown (after having sent a first message) in the webmail when
sending a message (the previous 3 bars under the address input field are now 5
bars, the first for starttls support, the last for requiretls support). when
all recipient domains for a message are known to implement requiretls,
requiretls is automatically selected for sending (instead of "default" tls
behaviour). users can also select the "fallback to insecure" to add the
"tls-required: no" header.
new metrics are added for insight into requiretls errors and (some, not yet
all) cases where tls-required-no ignored a tls/verification error.
the admin can change the requiretls status for messages in the queue. so with
default delivery attempts, when verified tls is required by failing, an admin
could potentially change the field to "tls-required: no"-behaviour.
messages received (over smtp) with the requiretls option, get a comment added
to their Received header line, just before "id", after "with".
the original next-hop domain. not anything after resolving cname's, because
then it takes just a single injected dns cname record to lead us to an
unrelated server (that we would verify, but it's the wrong server).
also don't fallback to just strict tls when something is wrong. we must use the
policy to check if an mx host is allowed. the whole idea is that unsigned dns
records cannot be trusted.
i noticed this while implementing dane.
getting mox to compile required changing code in only a few places where
package "syscall" was used: for accessing file access times and for umask
handling. an open problem is how to start a process as an unprivileged user on
windows. that's why "mox serve" isn't implemented yet. and just finding a way
to implement it now may not be good enough in the near future: we may want to
starting using a more complete privilege separation approach, with a process
handling sensitive tasks (handling private keys, authentication), where we may
want to pass file descriptors between processes. how would that work on
windows?
anyway, getting mox to compile for windows doesn't mean it works properly on
windows. the largest issue: mox would normally open a file, rename or remove
it, and finally close it. this happens during message delivery. that doesn't
work on windows, the rename/remove would fail because the file is still open.
so this commit swaps many "remove" and "close" calls. renames are a longer
story: message delivery had two ways to deliver: with "consuming" the
(temporary) message file (which would rename it to its final destination), and
without consuming (by hardlinking the file, falling back to copying). the last
delivery to a recipient of a message (and the only one in the common case of a
single recipient) would consume the message, and the earlier recipients would
not. during delivery, the already open message file was used, to parse the
message. we still want to use that open message file, and the caller now stays
responsible for closing it, but we no longer try to rename (consume) the file.
we always hardlink (or copy) during delivery (this works on windows), and the
caller is responsible for closing and removing (in that order) the original
temporary file. this does cost one syscall more. but it makes the delivery code
(responsibilities) a bit simpler.
there is one more obvious issue: the file system path separator. mox already
used the "filepath" package to join paths in many places, but not everywhere.
and it still used strings with slashes for local file access. with this commit,
the code now uses filepath.FromSlash for path strings with slashes, uses
"filepath" in a few more places where it previously didn't. also switches from
"filepath" to regular "path" package when handling mailbox names in a few
places, because those always use forward slashes, regardless of local file
system conventions. windows can handle forward slashes when opening files, so
test code that passes path strings with forward slashes straight to go stdlib
file i/o functions are left unchanged to reduce code churn. the regular
non-test code, or test code that uses path strings in places other than
standard i/o functions, does have the paths converted for consistent paths
(otherwise we would end up with paths with mixed forward/backward slashes in
log messages).
windows cannot dup a listening socket. for "mox localserve", it isn't
important, and we can work around the issue. the current approach for "mox
serve" (forking a process and passing file descriptors of listening sockets on
"privileged" ports) won't work on windows. perhaps it isn't needed on windows,
and any user can listen on "privileged" ports? that would be welcome.
on windows, os.Open cannot open a directory, so we cannot call Sync on it after
message delivery. a cursory internet search indicates that directories cannot
be synced on windows. the story is probably much more nuanced than that, with
long deep technical details/discussions/disagreement/confusion, like on unix.
for "mox localserve" we can get away with making syncdir a no-op.
the vendored dns resolver code is a copy of the go stdlib dns resolver, with
awareness of the "authentic data" (i.e. dnssec secure) added, as well as support
for enhanced dns errors, and looking up tlsa records (for dane). ideally it
would be upstreamed, but the chances seem slim.
dnssec-awareness is added to all packages, e.g. spf, dkim, dmarc, iprev. their
dnssec status is added to the Received message headers for incoming email.
but the main reason to add dnssec was for implementing dane. with dane, the
verification of tls certificates can be done through certificates/public keys
published in dns (in the tlsa records). this only makes sense (is trustworthy)
if those dns records can be verified to be authentic.
mox now applies dane to delivering messages over smtp. mox already implemented
mta-sts for webpki/pkix-verification of certificates against the (large) pool
of CA's, and still enforces those policies when present. but it now also checks
for dane records, and will verify those if present. if dane and mta-sts are
both absent, the regular opportunistic tls with starttls is still done. and the
fallback to plaintext is also still done.
mox also makes it easy to setup dane for incoming deliveries, so other servers
can deliver with dane tls certificate verification. the quickstart now
generates private keys that are used when requesting certificates with acme.
the private keys are pre-generated because they must be static and known during
setup, because their public keys must be published in tlsa records in dns.
autocert would generate private keys on its own, so had to be forked to add the
option to provide the private key when requesting a new certificate. hopefully
upstream will accept the change and we can drop the fork.
with this change, using the quickstart to setup a new mox instance, the checks
at internet.nl result in a 100% score, provided the domain is dnssec-signed and
the network doesn't have any issues.
increase() and rate() don't seem to assume a previous value of 0 when a vector
gets a first value for a label. you would think that an increase() on a
first-value mox_panic_total{"..."}=1 would return 1, and similar for rate(), but
that doesn't appear to be the behaviour. so we just explicitly initialize the
count to 0 for each possible label value. mox has more vector metrics, but
panics feels like the most important, and it's too much code to initialize them
all, for all combinations of label values. there is probably a better way that
fixes this for all cases...
the bulk of a message is stored on disk. a message prefix is stored in the
database (for prefixed headers like "Received:"). this adds a check to ensure
Size = prefix length + on-disk file size.
verifydata also checks for this now.
and one older and one new (since yesterday) bug was found. the first when
appending a message without a header/body section (uncommon). the second when
sending messages from webmail with localserve (uncommon).
it was far down on the roadmap, but implemented earlier, because it's
interesting, and to help prepare for a jmap implementation. for jmap we need to
implement more client-like functionality than with just imap. internal data
structures need to change. jmap has lots of other requirements, so it's already
a big project. by implementing a webmail now, some of the required data
structure changes become clear and can be made now, so the later jmap
implementation can do things similarly to the webmail code. the webmail
frontend and webmail are written together, making their interface/api much
smaller and simpler than jmap.
one of the internal changes is that we now keep track of per-mailbox
total/unread/unseen/deleted message counts and mailbox sizes. keeping this
data consistent after any change to the stored messages (through the code base)
is tricky, so mox now has a consistency check that verifies the counts are
correct, which runs only during tests, each time an internal account reference
is closed. we have a few more internal "changes" that are propagated for the
webmail frontend (that imap doesn't have a way to propagate on a connection),
like changes to the special-use flags on mailboxes, and used keywords in a
mailbox. more changes that will be required have revealed themselves while
implementing the webmail, and will be implemented next.
the webmail user interface is modeled after the mail clients i use or have
used: thunderbird, macos mail, mutt; and webmails i normally only use for
testing: gmail, proton, yahoo, outlook. a somewhat technical user is assumed,
but still the goal is to make this webmail client easy to use for everyone. the
user interface looks like most other mail clients: a list of mailboxes, a
search bar, a message list view, and message details. there is a top/bottom and
a left/right layout for the list/message view, default is automatic based on
screen size. the panes can be resized by the user. buttons for actions are just
text, not icons. clicking a button briefly shows the shortcut for the action in
the bottom right, helping with learning to operate quickly. any text that is
underdotted has a title attribute that causes more information to be displayed,
e.g. what a button does or a field is about. to highlight potential phishing
attempts, any text (anywhere in the webclient) that switches unicode "blocks"
(a rough approximation to (language) scripts) within a word is underlined
orange. multiple messages can be selected with familiar ui interaction:
clicking while holding control and/or shift keys. keyboard navigation works
with arrows/page up/down and home/end keys, and also with a few basic vi-like
keys for list/message navigation. we prefer showing the text instead of
html (with inlined images only) version of a message. html messages are shown
in an iframe served from an endpoint with CSP headers to prevent dangerous
resources (scripts, external images) from being loaded. the html is also
sanitized, with javascript removed. a user can choose to load external
resources (e.g. images for tracking purposes).
the frontend is just (strict) typescript, no external frameworks. all
incoming/outgoing data is typechecked, both the api request parameters and
response types, and the data coming in over SSE. the types and checking code
are generated with sherpats, which uses the api definitions generated by
sherpadoc based on the Go code. so types from the backend are automatically
propagated to the frontend. since there is no framework to automatically
propagate properties and rerender components, changes coming in over the SSE
connection are propagated explicitly with regular function calls. the ui is
separated into "views", each with a "root" dom element that is added to the
visible document. these views have additional functions for getting changes
propagated, often resulting in the view updating its (internal) ui state (dom).
we keep the frontend compilation simple, it's just a few typescript files that
get compiled (combined and types stripped) into a single js file, no additional
runtime code needed or complicated build processes used. the webmail is served
is served from a compressed, cachable html file that includes style and the
javascript, currently just over 225kb uncompressed, under 60kb compressed (not
minified, including comments). we include the generated js files in the
repository, to keep Go's easily buildable self-contained binaries.
authentication is basic http, as with the account and admin pages. most data
comes in over one long-term SSE connection to the backend. api requests signal
which mailbox/search/messages are requested over the SSE connection. fetching
individual messages, and making changes, are done through api calls. the
operations are similar to imap, so some code has been moved from package
imapserver to package store. the future jmap implementation will benefit from
these changes too. more functionality will probably be moved to the store
package in the future.
the quickstart enables webmail on the internal listener by default (for new
installs). users can enable it on the public listener if they want to. mox
localserve enables it too. to enable webmail on existing installs, add settings
like the following to the listeners in mox.conf, similar to AccountHTTP(S):
WebmailHTTP:
Enabled: true
WebmailHTTPS:
Enabled: true
special thanks to liesbeth, gerben, andrii for early user feedback.
there is plenty still to do, see the list at the top of webmail/webmail.ts.
feedback welcome as always.
so mail user agents will show DSNs threaded/grouped with the original message.
we store the MessageID in the message queue, so we have the value within reach
when we need it.
i saw a references header in a DSN from gmail on a test account. makes sense to me.
and add a bit more logging for unexpected failures when closing files.
and make tests pass with a TMPDIR on a different filesystem than the testdata directory.
