getting mox to compile required changing code in only a few places where
package "syscall" was used: for accessing file access times and for umask
handling. an open problem is how to start a process as an unprivileged user on
windows. that's why "mox serve" isn't implemented yet. and just finding a way
to implement it now may not be good enough in the near future: we may want to
starting using a more complete privilege separation approach, with a process
handling sensitive tasks (handling private keys, authentication), where we may
want to pass file descriptors between processes. how would that work on
windows?
anyway, getting mox to compile for windows doesn't mean it works properly on
windows. the largest issue: mox would normally open a file, rename or remove
it, and finally close it. this happens during message delivery. that doesn't
work on windows, the rename/remove would fail because the file is still open.
so this commit swaps many "remove" and "close" calls. renames are a longer
story: message delivery had two ways to deliver: with "consuming" the
(temporary) message file (which would rename it to its final destination), and
without consuming (by hardlinking the file, falling back to copying). the last
delivery to a recipient of a message (and the only one in the common case of a
single recipient) would consume the message, and the earlier recipients would
not. during delivery, the already open message file was used, to parse the
message. we still want to use that open message file, and the caller now stays
responsible for closing it, but we no longer try to rename (consume) the file.
we always hardlink (or copy) during delivery (this works on windows), and the
caller is responsible for closing and removing (in that order) the original
temporary file. this does cost one syscall more. but it makes the delivery code
(responsibilities) a bit simpler.
there is one more obvious issue: the file system path separator. mox already
used the "filepath" package to join paths in many places, but not everywhere.
and it still used strings with slashes for local file access. with this commit,
the code now uses filepath.FromSlash for path strings with slashes, uses
"filepath" in a few more places where it previously didn't. also switches from
"filepath" to regular "path" package when handling mailbox names in a few
places, because those always use forward slashes, regardless of local file
system conventions. windows can handle forward slashes when opening files, so
test code that passes path strings with forward slashes straight to go stdlib
file i/o functions are left unchanged to reduce code churn. the regular
non-test code, or test code that uses path strings in places other than
standard i/o functions, does have the paths converted for consistent paths
(otherwise we would end up with paths with mixed forward/backward slashes in
log messages).
windows cannot dup a listening socket. for "mox localserve", it isn't
important, and we can work around the issue. the current approach for "mox
serve" (forking a process and passing file descriptors of listening sockets on
"privileged" ports) won't work on windows. perhaps it isn't needed on windows,
and any user can listen on "privileged" ports? that would be welcome.
on windows, os.Open cannot open a directory, so we cannot call Sync on it after
message delivery. a cursory internet search indicates that directories cannot
be synced on windows. the story is probably much more nuanced than that, with
long deep technical details/discussions/disagreement/confusion, like on unix.
for "mox localserve" we can get away with making syncdir a no-op.
people will either paste the records in their zone file. in that case, the
records will inherit "IN" from earlier records, and there will always be one
record. if anyone uses a different class, their smart enough to know they need
to add IN manually.
plenty of people will add their records through some clunky web interface of
their dns operator. they probably won't even have the choice to set the class,
it'll always be IN.
the vendored dns resolver code is a copy of the go stdlib dns resolver, with
awareness of the "authentic data" (i.e. dnssec secure) added, as well as support
for enhanced dns errors, and looking up tlsa records (for dane). ideally it
would be upstreamed, but the chances seem slim.
dnssec-awareness is added to all packages, e.g. spf, dkim, dmarc, iprev. their
dnssec status is added to the Received message headers for incoming email.
but the main reason to add dnssec was for implementing dane. with dane, the
verification of tls certificates can be done through certificates/public keys
published in dns (in the tlsa records). this only makes sense (is trustworthy)
if those dns records can be verified to be authentic.
mox now applies dane to delivering messages over smtp. mox already implemented
mta-sts for webpki/pkix-verification of certificates against the (large) pool
of CA's, and still enforces those policies when present. but it now also checks
for dane records, and will verify those if present. if dane and mta-sts are
both absent, the regular opportunistic tls with starttls is still done. and the
fallback to plaintext is also still done.
mox also makes it easy to setup dane for incoming deliveries, so other servers
can deliver with dane tls certificate verification. the quickstart now
generates private keys that are used when requesting certificates with acme.
the private keys are pre-generated because they must be static and known during
setup, because their public keys must be published in tlsa records in dns.
autocert would generate private keys on its own, so had to be forked to add the
option to provide the private key when requesting a new certificate. hopefully
upstream will accept the change and we can drop the fork.
with this change, using the quickstart to setup a new mox instance, the checks
at internet.nl result in a 100% score, provided the domain is dnssec-signed and
the network doesn't have any issues.
because with the name you would expect an account name.
and the email-resolving behaviour is surprising: with wildcard addresses you
can use any address, including a typo. you would change the password of the
address with the wildcard, without any warning. accounts are more precise and
less error-prone.
for issue #68 by x8x
we match messages to their parents based on the "references" and "in-reply-to"
headers (requiring the same base subject), and in absense of those headers we
also by only base subject (against messages received max 4 weeks ago).
we store a threadid with messages. all messages in a thread have the same
threadid. messages also have a "thread parent ids", which holds all id's of
parent messages up to the thread root. then there is "thread missing link",
which is set when a referenced immediate parent wasn't found (but possibly
earlier ancestors can still be found and will be in thread parent ids".
threads can be muted: newly delivered messages are automatically marked as
read/seen. threads can be marked as collapsed: if set, the webmail collapses
the thread to a single item in the basic threading view (default is to expand
threads). the muted and collapsed fields are copied from their parent on
message delivery.
the threading is implemented in the webmail. the non-threading mode still works
as before. the new default threading mode "unread" automatically expands only
the threads with at least one unread (not seen) meessage. the basic threading
mode "on" expands all threads except when explicitly collapsed (as saved in the
thread collapsed field). new shortcuts for navigation/interaction threads have
been added, e.g. go to previous/next thread root, toggle collapse/expand of
thread (or double click), toggle mute of thread. some previous shortcuts have
changed, see the help for details.
the message threading are added with an explicit account upgrade step,
automatically started when an account is opened. the upgrade is done in the
background because it will take too long for large mailboxes to block account
operations. the upgrade takes two steps: 1. updating all message records in the
database to add a normalized message-id and thread base subject (with "re:",
"fwd:" and several other schemes stripped). 2. going through all messages in
the database again, reading the "references" and "in-reply-to" headers from
disk, and matching against their parents. this second step is also done at the
end of each import of mbox/maildir mailboxes. new deliveries are matched
immediately against other existing messages, currently no attempt is made to
rematch previously delivered messages (which could be useful for related
messages being delivered out of order).
the threading is not yet exposed over imap.
to accept reports for another domain, first add that domain to the config,
leaving all options empty except DMARC/TLSRPT in which you configure a Domain.
the suggested DNS DMARC/TLSRPT records will show the email address with
configured domain. for DMARC, the dnscheck functionality will verify that the
destination domain has opted in to receiving reports.
there is a new command-line subcommand "mox dmarc checkreportaddrs" that
verifies if dmarc reporting destination addresses have opted in to received
reports.
this also changes the suggested dns records (in quickstart, and through admin
pages and cli subcommand) to take into account whether DMARC and TLSRPT is
configured, and with which localpart/domain (previously it always printed
records as if reporting was enabled for the domain). and when generating the
suggested DNS records, the dmarc.Record and tlsrpt.Record code is used, with
proper uri-escaping.
a few places still looked at the name "Sent". but since we have special-use
flags, we should always look at those. this also changes the config so admins
can specify different names for the special-use mailboxes to create for new
accounts, e.g. in a different language. the old config option is still
understood, just deprecated.
renaming inbox is special. the mailbox isn't renamed, but its messages moved to
a new mailbox. we weren't updating the destination mailbox uidnext with the new
messages. the fix not only sets the uidnext correctly, but also renumbers the
uids, starting at 1.
this also adds a consistency check for message uids and mailbox uidnexts, and
for mailbox uidvalidity account nextuidvalidity in "mox verifydata".
this also adds command "mox fixuidmeta" (not listed) that fixes up mailbox uidnext
and account uidvalidity. and command "mox reassignuids" that will renumber the
uids for either one or all mailboxes in an account.
the default transport is still just "direct delivery", where we connect to the
destination domain's MX servers.
other transports are:
- regular smtp without authentication, this is relaying to a smarthost.
- submission with authentication, e.g. to a third party email sending service.
- direct delivery, but with with connections going through a socks proxy. this
can be helpful if your ip is blocked, you need to get email out, and you have
another IP that isn't blocked.
keep in mind that for all of the above, appropriate SPF/DKIM settings have to
be configured. the "dnscheck" for a domain does a check for any SOCKS IP in the
SPF record. SPF for smtp/submission (ranges? includes?) and any DKIM
requirements cannot really be checked.
which transport is used can be configured through routes. routes can be set on
an account, a domain, or globally. the routes are evaluated in that order, with
the first match selecting the transport. these routes are evaluated for each
delivery attempt. common selection criteria are recipient domain and sender
domain, but also which delivery attempt this is. you could configured mox to
attempt sending through a 3rd party from the 4th attempt onwards.
routes and transports are optional. if no route matches, or an empty/zero
transport is selected, normal direct delivery is done.
we could already "submit" emails with 3rd party accounts with "sendmail". but
we now support more SASL authentication mechanisms with SMTP (not only PLAIN,
but also SCRAM-SHA-256, SCRAM-SHA-1 and CRAM-MD5), which sendmail now also
supports. sendmail will use the most secure mechanism supported by the server,
or the explicitly configured mechanism.
for issue #36 by dmikushin. also based on earlier discussion on hackernews.
the backup command will make consistent snapshots of all the database files. i
had been copying the db files before, and it usually works. but if the file is
modified during the backup, it is inconsistent and is likely to generate errors
when reading (can be at any moment in the future, when reading some db page).
"mox backup" opens the database file and writes out a copy in a transaction.
it also duplicates the message files.
before doing a restore, you could run "mox verifydata" on the to-be-restored
"data" directory. it check the database files, and compares the message files
with the database.
the new "gentestdata" subcommand generates a basic "data" directory, with a
queue and a few accounts. we will use it in the future along with "verifydata"
to test upgrades from old version to the latest version. both when going to the
next version, and when skipping several versions. the script test-upgrades.sh
executes these tests and doesn't do anything at the moment, because no releases
have this subcommand yet.
inspired by a failed upgrade attempt of a pre-release version.
by specifying a "destination" in an account that is just "@" followed by the
domain, e.g. "@example.org". messages are only delivered to the catchall
address when no regular destination matches (taking the per-domain
catchall-separator and case-sensisitivity into account).
for issue #18
it must be completely parsable.
normally, if we receive a message that we cannot fully parse, we accept it and
treat it as opaque application/octet-stream.
also make it more clear that localserve accepts email intended for any email
address.
localserve creates a config for listening on localhost for
imap/smtp/submission/http, on port numbers 1000 + the common service port
numbers. all incoming email is accepted (if checks pass), and a few pattern in
localparts are recognized and result in delivery errors.
- if the guessed hostname is not correct, you can specify one yourself. useful
if you generate a config locally and deploy to a different machine.
- if explicit public ips are found, check them with spamhaus and spamcop DNSBLs
and warn if they are listed, with links to check more DNSBLs. should prevent
disappointment later on.
- make it easier to run with an existing webserver. the quickstart now has a new option for that, it generates a different mox.conf, and further instructions such as configuring the tls keys/certs and reverse proxy urls. and changes to make autoconfig work in that case too.
- when starting up, request a tls cert for the hostname and for the autoconfig endpoint. the first will be requested soon anyway, and the autoconfig cert is needed early so the first autoconfig request doesn't time out (without helpful message to the user by at least thunderbird). and don't request the certificate before the servers are online. the root process was now requesting the certs, before the child process was serving on the tls port.
- add examples of configs generated by the quickstart.
- enable debug logging in config from quickstart, to give user more info.
for issue #5
- serve static files, serving index.html or optionally listings for directories
- redirects
- reverse-proxy, forwarding requests to a backend
these are configurable through the config file. a domain and path regexp have to
be configured. path prefixes can be stripped. configured domains are added to
the autotls allowlist, so acme automatically fetches certificates for them.
all webserver requests now have (access) logging, metrics, rate limiting.
on http errors, the error message prints an encrypted cid for relating with log files.
this also adds a new mechanism for example config files.
makes it easier to run on bsd's, where you cannot (easily?) let non-root users
bind to ports <1024. starting as root also paves the way for future improvements
with privilege separation.
unfortunately, this requires changes to how you start mox. though mox will help
by automatically fix up dir/file permissions/ownership.
if you start mox from the systemd unit file, you should update it so it starts
as root and adds a few additional capabilities:
# first update the mox binary, then, as root:
./mox config printservice >mox.service
systemctl daemon-reload
systemctl restart mox
journalctl -f -u mox &
# you should see mox start up, with messages about fixing permissions on dirs/files.
if you used the recommended config/ and data/ directory, in a directory just for
mox, and with the mox user called "mox", this should be enough.
if you don't want mox to modify dir/file permissions, set "NoFixPermissions:
true" in mox.conf.
if you named the mox user something else than mox, e.g. "_mox", add "User: _mox"
to mox.conf.
if you created a shared service user as originally suggested, you may want to
get rid of that as it is no longer useful and may get in the way. e.g. if you
had /home/service/mox with a "service" user, that service user can no longer
access any files: only mox and root can.
this also adds scripts for building mox docker images for alpine-supported
platforms.
the "restart" subcommand has been removed. it wasn't all that useful and got in
the way.
and another change: when adding a domain while mtasts isn't enabled, don't add
the per-domain mtasts config, as it would cause failure to add the domain.
based on report from setting up mox on openbsd from mteege.
and based on issue #3. thanks for the feedback!
so users can easily take their email out of somewhere else, and import it into mox.
this goes a little way to give feedback as the import progresses: upload
progress is shown (surprisingly, browsers aren't doing this...), imported
mailboxes/messages are counted (batched) and import issues/warnings are
displayed, all sent over an SSE connection. an import token is stored in
sessionstorage. if you reload the page (e.g. after a connection error), the
browser will reconnect to the running import and show its progress again. and
you can just abort the import before it is finished and committed, and nothing
will have changed.
this also imports flags/keywords from mbox files.
this matches how the quickstart recommends setting up mox.
i've been running "./mox -config/mox.conf" from there for admin commands, but
"mox" is enough now.
before, we used heuristics to decide when to train/untrain a message as junk or
nonjunk: the message had to be seen, be in certain mailboxes. then if a message
was marked as junk, it was junk. and otherwise it was nonjunk. this wasn't good
enough: you may want to keep some messages around as neither junk or nonjunk.
and that wasn't possible.
ideally, we would just look at the imap $Junk and $NotJunk flags. the problem
is that mail clients don't set these flags, or don't make it easy. thunderbird
can set the flags based on its own bayesian filter. it has a shortcut for
marking Junk and moving it to the junk folder (good), but the counterpart of
notjunk only marks a message as notjunk without showing in the UI that it was
marked as notjunk. there is also no "move and mark as notjunk" mechanism. e.g.
"archive" does not mark a message as notjunk. ios mail and mutt don't appear to
have any way to see or change the $Junk and $NotJunk flags.
what email clients do have is the ability to move messages to other
mailboxes/folders. so mox now has a mechanism that allows you to configure
mailboxes that automatically set $Junk or $NotJunk (or clear both) when a
message is moved/copied/delivered to that folder. e.g. a mailbox called junk or
spam or rejects marks its messags as junk. inbox, postmaster, dmarc, tlsrpt,
neutral* mark their messages as neither junk or notjunk. other folders mark
their messages as notjunk. e.g. list/*, archive. this functionality is
optional, but enabled with the quickstart and for new accounts.
also, mox now keeps track of the previous training of a message and will only
untrain/train if needed. before, there probably have been duplicate or missing
(un)trainings.
this also includes a new subcommand "retrain" to recreate the junkfilter for an
account. you should run it after updating to this version. and you should
probably also modify your account config to include the AutomaticJunkFlags.
- make the example commands in the readme more likely to succeed, especially
for people who are not familiar with go and its toolchain.
- improve probability that the correct configuration is generated, especially
the hostname. previously, if the quickstart email address was "some.domain",
and the machine where you ran the quickstart was "myhost", the hostname used
for the configuration was assumed to be "myhost.some.domain". but this is often
not correct, especially when configuring mox to serve mail on a subdomain of an
existing domain. mox will now try to determine the host name by a reverse
lookup of the public ips it found. and it will warn if there are no/multiple
candidates.
based on feedback from erik dubbelboer, thanks!
named "traceauth" and "tracedata".
with this, you can (almost) enable trace logging without fear of logging
sensitive data or ddos'ing your log server.
the caveat is that the imap login command has already printed the line as
regular trace before we can decide it should not be. can be fixed soon.
- when sendmail is invoked to sent to a local user, eg "root", send to a
configured defaultaddress instead. previously, we would fail printing usage.
- add a subcommand that prints the config file, /etc/moxsubmit.conf.
- follow the STARTTLS setting.
- fix running as just plain sendmail.
