change mox to start as root, bind to network sockets, then drop to regular unprivileged mox user
makes it easier to run on bsd's, where you cannot (easily?) let non-root users
bind to ports <1024. starting as root also paves the way for future improvements
with privilege separation.
unfortunately, this requires changes to how you start mox. though mox will help
by automatically fix up dir/file permissions/ownership.
if you start mox from the systemd unit file, you should update it so it starts
as root and adds a few additional capabilities:
# first update the mox binary, then, as root:
./mox config printservice >mox.service
systemctl daemon-reload
systemctl restart mox
journalctl -f -u mox &
# you should see mox start up, with messages about fixing permissions on dirs/files.
if you used the recommended config/ and data/ directory, in a directory just for
mox, and with the mox user called "mox", this should be enough.
if you don't want mox to modify dir/file permissions, set "NoFixPermissions:
true" in mox.conf.
if you named the mox user something else than mox, e.g. "_mox", add "User: _mox"
to mox.conf.
if you created a shared service user as originally suggested, you may want to
get rid of that as it is no longer useful and may get in the way. e.g. if you
had /home/service/mox with a "service" user, that service user can no longer
access any files: only mox and root can.
this also adds scripts for building mox docker images for alpine-supported
platforms.
the "restart" subcommand has been removed. it wasn't all that useful and got in
the way.
and another change: when adding a domain while mtasts isn't enabled, don't add
the per-domain mtasts config, as it would cause failure to add the domain.
based on report from setting up mox on openbsd from mteege.
and based on issue #3. thanks for the feedback!
2023-02-27 14:19:55 +03:00
|
|
|
# Before launching mox, run the quickstart to create config files for running as
|
|
|
|
|
# user the mox user (create it on the host system first, e.g. "useradd -d $PWD mox"):
|
2023-02-24 16:16:51 +03:00
|
|
|
#
|
2023-03-04 02:49:02 +03:00
|
|
|
# mkdir config data web
|
change mox to start as root, bind to network sockets, then drop to regular unprivileged mox user
makes it easier to run on bsd's, where you cannot (easily?) let non-root users
bind to ports <1024. starting as root also paves the way for future improvements
with privilege separation.
unfortunately, this requires changes to how you start mox. though mox will help
by automatically fix up dir/file permissions/ownership.
if you start mox from the systemd unit file, you should update it so it starts
as root and adds a few additional capabilities:
# first update the mox binary, then, as root:
./mox config printservice >mox.service
systemctl daemon-reload
systemctl restart mox
journalctl -f -u mox &
# you should see mox start up, with messages about fixing permissions on dirs/files.
if you used the recommended config/ and data/ directory, in a directory just for
mox, and with the mox user called "mox", this should be enough.
if you don't want mox to modify dir/file permissions, set "NoFixPermissions:
true" in mox.conf.
if you named the mox user something else than mox, e.g. "_mox", add "User: _mox"
to mox.conf.
if you created a shared service user as originally suggested, you may want to
get rid of that as it is no longer useful and may get in the way. e.g. if you
had /home/service/mox with a "service" user, that service user can no longer
access any files: only mox and root can.
this also adds scripts for building mox docker images for alpine-supported
platforms.
the "restart" subcommand has been removed. it wasn't all that useful and got in
the way.
and another change: when adding a domain while mtasts isn't enabled, don't add
the per-domain mtasts config, as it would cause failure to add the domain.
based on report from setting up mox on openbsd from mteege.
and based on issue #3. thanks for the feedback!
2023-02-27 14:19:55 +03:00
|
|
|
# docker-compose run mox mox quickstart you@yourdomain.example $(id -u mox)
|
2023-02-24 16:16:51 +03:00
|
|
|
#
|
2023-03-05 17:40:26 +03:00
|
|
|
# note: if you are running quickstart on a different machine than you will deploy
|
|
|
|
|
# mox to, use the "quickstart -hostname ..." flag.
|
|
|
|
|
#
|
change mox to start as root, bind to network sockets, then drop to regular unprivileged mox user
makes it easier to run on bsd's, where you cannot (easily?) let non-root users
bind to ports <1024. starting as root also paves the way for future improvements
with privilege separation.
unfortunately, this requires changes to how you start mox. though mox will help
by automatically fix up dir/file permissions/ownership.
if you start mox from the systemd unit file, you should update it so it starts
as root and adds a few additional capabilities:
# first update the mox binary, then, as root:
./mox config printservice >mox.service
systemctl daemon-reload
systemctl restart mox
journalctl -f -u mox &
# you should see mox start up, with messages about fixing permissions on dirs/files.
if you used the recommended config/ and data/ directory, in a directory just for
mox, and with the mox user called "mox", this should be enough.
if you don't want mox to modify dir/file permissions, set "NoFixPermissions:
true" in mox.conf.
if you named the mox user something else than mox, e.g. "_mox", add "User: _mox"
to mox.conf.
if you created a shared service user as originally suggested, you may want to
get rid of that as it is no longer useful and may get in the way. e.g. if you
had /home/service/mox with a "service" user, that service user can no longer
access any files: only mox and root can.
this also adds scripts for building mox docker images for alpine-supported
platforms.
the "restart" subcommand has been removed. it wasn't all that useful and got in
the way.
and another change: when adding a domain while mtasts isn't enabled, don't add
the per-domain mtasts config, as it would cause failure to add the domain.
based on report from setting up mox on openbsd from mteege.
and based on issue #3. thanks for the feedback!
2023-02-27 14:19:55 +03:00
|
|
|
# After following the quickstart instructions you can start mox:
|
2023-02-24 16:16:51 +03:00
|
|
|
#
|
change mox to start as root, bind to network sockets, then drop to regular unprivileged mox user
makes it easier to run on bsd's, where you cannot (easily?) let non-root users
bind to ports <1024. starting as root also paves the way for future improvements
with privilege separation.
unfortunately, this requires changes to how you start mox. though mox will help
by automatically fix up dir/file permissions/ownership.
if you start mox from the systemd unit file, you should update it so it starts
as root and adds a few additional capabilities:
# first update the mox binary, then, as root:
./mox config printservice >mox.service
systemctl daemon-reload
systemctl restart mox
journalctl -f -u mox &
# you should see mox start up, with messages about fixing permissions on dirs/files.
if you used the recommended config/ and data/ directory, in a directory just for
mox, and with the mox user called "mox", this should be enough.
if you don't want mox to modify dir/file permissions, set "NoFixPermissions:
true" in mox.conf.
if you named the mox user something else than mox, e.g. "_mox", add "User: _mox"
to mox.conf.
if you created a shared service user as originally suggested, you may want to
get rid of that as it is no longer useful and may get in the way. e.g. if you
had /home/service/mox with a "service" user, that service user can no longer
access any files: only mox and root can.
this also adds scripts for building mox docker images for alpine-supported
platforms.
the "restart" subcommand has been removed. it wasn't all that useful and got in
the way.
and another change: when adding a domain while mtasts isn't enabled, don't add
the per-domain mtasts config, as it would cause failure to add the domain.
based on report from setting up mox on openbsd from mteege.
and based on issue #3. thanks for the feedback!
2023-02-27 14:19:55 +03:00
|
|
|
# docker-compose up
|
2023-02-24 16:16:51 +03:00
|
|
|
|
|
|
|
|
version: '3.7'
|
|
|
|
|
services:
|
|
|
|
|
mox:
|
|
|
|
|
# Replace latest with the version you want to run.
|
2023-02-27 16:04:45 +03:00
|
|
|
image: docker.io/moxmail/mox:latest
|
2023-02-24 16:16:51 +03:00
|
|
|
environment:
|
2023-03-04 02:49:02 +03:00
|
|
|
- MOX_DOCKER=yes # Quickstart won't try to write systemd service file.
|
2023-02-24 16:16:51 +03:00
|
|
|
# Mox needs host networking because it needs access to the IPs of the
|
|
|
|
|
# machine, and the IPs of incoming connections for spam filtering.
|
|
|
|
|
network_mode: 'host'
|
|
|
|
|
volumes:
|
|
|
|
|
- ./config:/mox/config
|
|
|
|
|
- ./data:/mox/data
|
improve webserver, add domain redirects (aliases), add tests and admin page ui to manage the config
- make builtin http handlers serve on specific domains, such as for mta-sts, so
e.g. /.well-known/mta-sts.txt isn't served on all domains.
- add logging of a few more fields in access logging.
- small tweaks/bug fixes in webserver request handling.
- add config option for redirecting entire domains to another (common enough).
- split httpserver metric into two: one for duration until writing header (i.e.
performance of server), another for duration until full response is sent to
client (i.e. performance as perceived by users).
- add admin ui, a new page for managing the configs. after making changes
and hitting "save", the changes take effect immediately. the page itself
doesn't look very well-designed (many input fields, makes it look messy). i
have an idea to improve it (explained in admin.html as todo) by making the
layout look just like the config file. not urgent though.
i've already changed my websites/webapps over.
the idea of adding a webserver is to take away a (the) reason for folks to want
to complicate their mox setup by running an other webserver on the same machine.
i think the current webserver implementation can already serve most common use
cases. with a few more tweaks (feedback needed!) we should be able to get to 95%
of the use cases. the reverse proxy can take care of the remaining 5%.
nevertheless, a next step is still to change the quickstart to make it easier
for folks to run with an existing webserver, with existing tls certs/keys.
that's how this relates to issue #5.
2023-03-02 20:15:54 +03:00
|
|
|
# web is optional but recommended to bind in, useful for serving static files with
|
|
|
|
|
# the webserver.
|
|
|
|
|
- ./web:/mox/web
|
2023-02-24 16:16:51 +03:00
|
|
|
working_dir: /mox
|
|
|
|
|
restart: on-failure
|
|
|
|
|
healthcheck:
|
|
|
|
|
test: netstat -nlt | grep ':25 '
|
|
|
|
|
interval: 1s
|
|
|
|
|
timeout: 1s
|
|
|
|
|
retries: 10
|