mox/queue/queue_test.go

712 lines
20 KiB
Go
Raw Normal View History

2023-01-30 16:27:06 +03:00
package queue
import (
"bufio"
"context"
new feature: when delivering messages from the queue, make it possible to use a "transport" the default transport is still just "direct delivery", where we connect to the destination domain's MX servers. other transports are: - regular smtp without authentication, this is relaying to a smarthost. - submission with authentication, e.g. to a third party email sending service. - direct delivery, but with with connections going through a socks proxy. this can be helpful if your ip is blocked, you need to get email out, and you have another IP that isn't blocked. keep in mind that for all of the above, appropriate SPF/DKIM settings have to be configured. the "dnscheck" for a domain does a check for any SOCKS IP in the SPF record. SPF for smtp/submission (ranges? includes?) and any DKIM requirements cannot really be checked. which transport is used can be configured through routes. routes can be set on an account, a domain, or globally. the routes are evaluated in that order, with the first match selecting the transport. these routes are evaluated for each delivery attempt. common selection criteria are recipient domain and sender domain, but also which delivery attempt this is. you could configured mox to attempt sending through a 3rd party from the 4th attempt onwards. routes and transports are optional. if no route matches, or an empty/zero transport is selected, normal direct delivery is done. we could already "submit" emails with 3rd party accounts with "sendmail". but we now support more SASL authentication mechanisms with SMTP (not only PLAIN, but also SCRAM-SHA-256, SCRAM-SHA-1 and CRAM-MD5), which sendmail now also supports. sendmail will use the most secure mechanism supported by the server, or the explicitly configured mechanism. for issue #36 by dmikushin. also based on earlier discussion on hackernews.
2023-06-16 19:38:28 +03:00
"crypto/ed25519"
cryptorand "crypto/rand"
implement dnssec-awareness throughout code, and dane for incoming/outgoing mail delivery the vendored dns resolver code is a copy of the go stdlib dns resolver, with awareness of the "authentic data" (i.e. dnssec secure) added, as well as support for enhanced dns errors, and looking up tlsa records (for dane). ideally it would be upstreamed, but the chances seem slim. dnssec-awareness is added to all packages, e.g. spf, dkim, dmarc, iprev. their dnssec status is added to the Received message headers for incoming email. but the main reason to add dnssec was for implementing dane. with dane, the verification of tls certificates can be done through certificates/public keys published in dns (in the tlsa records). this only makes sense (is trustworthy) if those dns records can be verified to be authentic. mox now applies dane to delivering messages over smtp. mox already implemented mta-sts for webpki/pkix-verification of certificates against the (large) pool of CA's, and still enforces those policies when present. but it now also checks for dane records, and will verify those if present. if dane and mta-sts are both absent, the regular opportunistic tls with starttls is still done. and the fallback to plaintext is also still done. mox also makes it easy to setup dane for incoming deliveries, so other servers can deliver with dane tls certificate verification. the quickstart now generates private keys that are used when requesting certificates with acme. the private keys are pre-generated because they must be static and known during setup, because their public keys must be published in tlsa records in dns. autocert would generate private keys on its own, so had to be forked to add the option to provide the private key when requesting a new certificate. hopefully upstream will accept the change and we can drop the fork. with this change, using the quickstart to setup a new mox instance, the checks at internet.nl result in a 100% score, provided the domain is dnssec-signed and the network doesn't have any issues.
2023-10-10 13:09:35 +03:00
"crypto/sha256"
new feature: when delivering messages from the queue, make it possible to use a "transport" the default transport is still just "direct delivery", where we connect to the destination domain's MX servers. other transports are: - regular smtp without authentication, this is relaying to a smarthost. - submission with authentication, e.g. to a third party email sending service. - direct delivery, but with with connections going through a socks proxy. this can be helpful if your ip is blocked, you need to get email out, and you have another IP that isn't blocked. keep in mind that for all of the above, appropriate SPF/DKIM settings have to be configured. the "dnscheck" for a domain does a check for any SOCKS IP in the SPF record. SPF for smtp/submission (ranges? includes?) and any DKIM requirements cannot really be checked. which transport is used can be configured through routes. routes can be set on an account, a domain, or globally. the routes are evaluated in that order, with the first match selecting the transport. these routes are evaluated for each delivery attempt. common selection criteria are recipient domain and sender domain, but also which delivery attempt this is. you could configured mox to attempt sending through a 3rd party from the 4th attempt onwards. routes and transports are optional. if no route matches, or an empty/zero transport is selected, normal direct delivery is done. we could already "submit" emails with 3rd party accounts with "sendmail". but we now support more SASL authentication mechanisms with SMTP (not only PLAIN, but also SCRAM-SHA-256, SCRAM-SHA-1 and CRAM-MD5), which sendmail now also supports. sendmail will use the most secure mechanism supported by the server, or the explicitly configured mechanism. for issue #36 by dmikushin. also based on earlier discussion on hackernews.
2023-06-16 19:38:28 +03:00
"crypto/tls"
"crypto/x509"
2023-01-30 16:27:06 +03:00
"fmt"
"io"
new feature: when delivering messages from the queue, make it possible to use a "transport" the default transport is still just "direct delivery", where we connect to the destination domain's MX servers. other transports are: - regular smtp without authentication, this is relaying to a smarthost. - submission with authentication, e.g. to a third party email sending service. - direct delivery, but with with connections going through a socks proxy. this can be helpful if your ip is blocked, you need to get email out, and you have another IP that isn't blocked. keep in mind that for all of the above, appropriate SPF/DKIM settings have to be configured. the "dnscheck" for a domain does a check for any SOCKS IP in the SPF record. SPF for smtp/submission (ranges? includes?) and any DKIM requirements cannot really be checked. which transport is used can be configured through routes. routes can be set on an account, a domain, or globally. the routes are evaluated in that order, with the first match selecting the transport. these routes are evaluated for each delivery attempt. common selection criteria are recipient domain and sender domain, but also which delivery attempt this is. you could configured mox to attempt sending through a 3rd party from the 4th attempt onwards. routes and transports are optional. if no route matches, or an empty/zero transport is selected, normal direct delivery is done. we could already "submit" emails with 3rd party accounts with "sendmail". but we now support more SASL authentication mechanisms with SMTP (not only PLAIN, but also SCRAM-SHA-256, SCRAM-SHA-1 and CRAM-MD5), which sendmail now also supports. sendmail will use the most secure mechanism supported by the server, or the explicitly configured mechanism. for issue #36 by dmikushin. also based on earlier discussion on hackernews.
2023-06-16 19:38:28 +03:00
"math/big"
2023-01-30 16:27:06 +03:00
"net"
"os"
"strings"
"testing"
"time"
implement dnssec-awareness throughout code, and dane for incoming/outgoing mail delivery the vendored dns resolver code is a copy of the go stdlib dns resolver, with awareness of the "authentic data" (i.e. dnssec secure) added, as well as support for enhanced dns errors, and looking up tlsa records (for dane). ideally it would be upstreamed, but the chances seem slim. dnssec-awareness is added to all packages, e.g. spf, dkim, dmarc, iprev. their dnssec status is added to the Received message headers for incoming email. but the main reason to add dnssec was for implementing dane. with dane, the verification of tls certificates can be done through certificates/public keys published in dns (in the tlsa records). this only makes sense (is trustworthy) if those dns records can be verified to be authentic. mox now applies dane to delivering messages over smtp. mox already implemented mta-sts for webpki/pkix-verification of certificates against the (large) pool of CA's, and still enforces those policies when present. but it now also checks for dane records, and will verify those if present. if dane and mta-sts are both absent, the regular opportunistic tls with starttls is still done. and the fallback to plaintext is also still done. mox also makes it easy to setup dane for incoming deliveries, so other servers can deliver with dane tls certificate verification. the quickstart now generates private keys that are used when requesting certificates with acme. the private keys are pre-generated because they must be static and known during setup, because their public keys must be published in tlsa records in dns. autocert would generate private keys on its own, so had to be forked to add the option to provide the private key when requesting a new certificate. hopefully upstream will accept the change and we can drop the fork. with this change, using the quickstart to setup a new mox instance, the checks at internet.nl result in a 100% score, provided the domain is dnssec-signed and the network doesn't have any issues.
2023-10-10 13:09:35 +03:00
"github.com/mjl-/adns"
2023-01-30 16:27:06 +03:00
"github.com/mjl-/bstore"
"github.com/mjl-/mox/dns"
"github.com/mjl-/mox/mox-"
"github.com/mjl-/mox/smtp"
implement dnssec-awareness throughout code, and dane for incoming/outgoing mail delivery the vendored dns resolver code is a copy of the go stdlib dns resolver, with awareness of the "authentic data" (i.e. dnssec secure) added, as well as support for enhanced dns errors, and looking up tlsa records (for dane). ideally it would be upstreamed, but the chances seem slim. dnssec-awareness is added to all packages, e.g. spf, dkim, dmarc, iprev. their dnssec status is added to the Received message headers for incoming email. but the main reason to add dnssec was for implementing dane. with dane, the verification of tls certificates can be done through certificates/public keys published in dns (in the tlsa records). this only makes sense (is trustworthy) if those dns records can be verified to be authentic. mox now applies dane to delivering messages over smtp. mox already implemented mta-sts for webpki/pkix-verification of certificates against the (large) pool of CA's, and still enforces those policies when present. but it now also checks for dane records, and will verify those if present. if dane and mta-sts are both absent, the regular opportunistic tls with starttls is still done. and the fallback to plaintext is also still done. mox also makes it easy to setup dane for incoming deliveries, so other servers can deliver with dane tls certificate verification. the quickstart now generates private keys that are used when requesting certificates with acme. the private keys are pre-generated because they must be static and known during setup, because their public keys must be published in tlsa records in dns. autocert would generate private keys on its own, so had to be forked to add the option to provide the private key when requesting a new certificate. hopefully upstream will accept the change and we can drop the fork. with this change, using the quickstart to setup a new mox instance, the checks at internet.nl result in a 100% score, provided the domain is dnssec-signed and the network doesn't have any issues.
2023-10-10 13:09:35 +03:00
"github.com/mjl-/mox/smtpclient"
2023-01-30 16:27:06 +03:00
"github.com/mjl-/mox/store"
)
var ctxbg = context.Background()
2023-01-30 16:27:06 +03:00
func tcheck(t *testing.T, err error, msg string) {
if err != nil {
t.Helper()
t.Fatalf("%s: %s", msg, err)
}
}
func setup(t *testing.T) (*store.Account, func()) {
// Prepare config so email can be delivered to mjl@mox.example.
os.RemoveAll("../testdata/queue/data")
mox.Context = ctxbg
2023-01-30 16:27:06 +03:00
mox.ConfigStaticPath = "../testdata/queue/mox.conf"
mox.MustLoadConfig(true, false)
2023-01-30 16:27:06 +03:00
acc, err := store.OpenAccount("mjl")
tcheck(t, err, "open account")
err = acc.SetPassword("testtest")
tcheck(t, err, "set password")
switchStop := store.Switchboard()
mox.Shutdown, mox.ShutdownCancel = context.WithCancel(ctxbg)
2023-01-30 16:27:06 +03:00
return acc, func() {
acc.Close()
mox.ShutdownCancel()
mox.Shutdown, mox.ShutdownCancel = context.WithCancel(ctxbg)
2023-01-30 16:27:06 +03:00
Shutdown()
switchStop()
2023-01-30 16:27:06 +03:00
}
}
var testmsg = strings.ReplaceAll(`From: <mjl@mox.example>
To: <mjl@mox.example>
Subject: test
test email
`, "\n", "\r\n")
func prepareFile(t *testing.T) *os.File {
t.Helper()
msgFile, err := store.CreateMessageTemp("queue")
tcheck(t, err, "create temp message for delivery to queue")
_, err = msgFile.Write([]byte(testmsg))
tcheck(t, err, "write message file")
return msgFile
}
func TestQueue(t *testing.T) {
acc, cleanup := setup(t)
defer cleanup()
err := Init()
tcheck(t, err, "queue init")
msgs, err := List(ctxbg)
2023-01-30 16:27:06 +03:00
tcheck(t, err, "listing messages in queue")
if len(msgs) != 0 {
t.Fatalf("got %d messages in queue, expected 0", len(msgs))
}
path := smtp.Path{Localpart: "mjl", IPDomain: dns.IPDomain{Domain: dns.Domain{ASCII: "mox.example"}}}
_, err = Add(ctxbg, xlog, "mjl", path, path, false, false, int64(len(testmsg)), "<test@localhost>", nil, prepareFile(t), nil, true)
2023-01-30 16:27:06 +03:00
tcheck(t, err, "add message to queue for delivery")
mf2 := prepareFile(t)
_, err = Add(ctxbg, xlog, "mjl", path, path, false, false, int64(len(testmsg)), "<test@localhost>", nil, mf2, nil, false)
2023-01-30 16:27:06 +03:00
tcheck(t, err, "add message to queue for delivery")
os.Remove(mf2.Name())
msgs, err = List(ctxbg)
2023-01-30 16:27:06 +03:00
tcheck(t, err, "listing queue")
if len(msgs) != 2 {
t.Fatalf("got msgs %v, expected 1", msgs)
}
msg := msgs[0]
if msg.Attempts != 0 {
t.Fatalf("msg attempts %d, expected 0", msg.Attempts)
}
n, err := Drop(ctxbg, msgs[1].ID, "", "")
2023-01-30 16:27:06 +03:00
tcheck(t, err, "drop")
if n != 1 {
t.Fatalf("dropped %d, expected 1", n)
}
if _, err := os.Stat(msgs[1].MessagePath()); err == nil || !os.IsNotExist(err) {
t.Fatalf("dropped message not removed from file system")
}
2023-01-30 16:27:06 +03:00
next := nextWork(ctxbg, nil)
2023-01-30 16:27:06 +03:00
if next > 0 {
t.Fatalf("nextWork in %s, should be now", next)
}
busy := map[string]struct{}{"mox.example": {}}
if x := nextWork(ctxbg, busy); x != 24*time.Hour {
2023-01-30 16:27:06 +03:00
t.Fatalf("nextWork in %s for busy domain, should be in 24 hours", x)
}
if nn := launchWork(nil, busy); nn != 0 {
t.Fatalf("launchWork launched %d deliveries, expected 0", nn)
}
// Override dial function. We'll make connecting fail for now.
resolver := dns.MockResolver{
new feature: when delivering messages from the queue, make it possible to use a "transport" the default transport is still just "direct delivery", where we connect to the destination domain's MX servers. other transports are: - regular smtp without authentication, this is relaying to a smarthost. - submission with authentication, e.g. to a third party email sending service. - direct delivery, but with with connections going through a socks proxy. this can be helpful if your ip is blocked, you need to get email out, and you have another IP that isn't blocked. keep in mind that for all of the above, appropriate SPF/DKIM settings have to be configured. the "dnscheck" for a domain does a check for any SOCKS IP in the SPF record. SPF for smtp/submission (ranges? includes?) and any DKIM requirements cannot really be checked. which transport is used can be configured through routes. routes can be set on an account, a domain, or globally. the routes are evaluated in that order, with the first match selecting the transport. these routes are evaluated for each delivery attempt. common selection criteria are recipient domain and sender domain, but also which delivery attempt this is. you could configured mox to attempt sending through a 3rd party from the 4th attempt onwards. routes and transports are optional. if no route matches, or an empty/zero transport is selected, normal direct delivery is done. we could already "submit" emails with 3rd party accounts with "sendmail". but we now support more SASL authentication mechanisms with SMTP (not only PLAIN, but also SCRAM-SHA-256, SCRAM-SHA-1 and CRAM-MD5), which sendmail now also supports. sendmail will use the most secure mechanism supported by the server, or the explicitly configured mechanism. for issue #36 by dmikushin. also based on earlier discussion on hackernews.
2023-06-16 19:38:28 +03:00
A: map[string][]string{
"mox.example.": {"127.0.0.1"},
"submission.example.": {"127.0.0.1"},
},
2023-01-30 16:27:06 +03:00
MX: map[string][]*net.MX{"mox.example.": {{Host: "mox.example", Pref: 10}}},
}
dialed := make(chan struct{}, 1)
implement dnssec-awareness throughout code, and dane for incoming/outgoing mail delivery the vendored dns resolver code is a copy of the go stdlib dns resolver, with awareness of the "authentic data" (i.e. dnssec secure) added, as well as support for enhanced dns errors, and looking up tlsa records (for dane). ideally it would be upstreamed, but the chances seem slim. dnssec-awareness is added to all packages, e.g. spf, dkim, dmarc, iprev. their dnssec status is added to the Received message headers for incoming email. but the main reason to add dnssec was for implementing dane. with dane, the verification of tls certificates can be done through certificates/public keys published in dns (in the tlsa records). this only makes sense (is trustworthy) if those dns records can be verified to be authentic. mox now applies dane to delivering messages over smtp. mox already implemented mta-sts for webpki/pkix-verification of certificates against the (large) pool of CA's, and still enforces those policies when present. but it now also checks for dane records, and will verify those if present. if dane and mta-sts are both absent, the regular opportunistic tls with starttls is still done. and the fallback to plaintext is also still done. mox also makes it easy to setup dane for incoming deliveries, so other servers can deliver with dane tls certificate verification. the quickstart now generates private keys that are used when requesting certificates with acme. the private keys are pre-generated because they must be static and known during setup, because their public keys must be published in tlsa records in dns. autocert would generate private keys on its own, so had to be forked to add the option to provide the private key when requesting a new certificate. hopefully upstream will accept the change and we can drop the fork. with this change, using the quickstart to setup a new mox instance, the checks at internet.nl result in a 100% score, provided the domain is dnssec-signed and the network doesn't have any issues.
2023-10-10 13:09:35 +03:00
smtpclient.DialHook = func(ctx context.Context, dialer smtpclient.Dialer, timeout time.Duration, addr string, laddr net.Addr) (net.Conn, error) {
2023-01-30 16:27:06 +03:00
dialed <- struct{}{}
return nil, fmt.Errorf("failure from test")
}
implement dnssec-awareness throughout code, and dane for incoming/outgoing mail delivery the vendored dns resolver code is a copy of the go stdlib dns resolver, with awareness of the "authentic data" (i.e. dnssec secure) added, as well as support for enhanced dns errors, and looking up tlsa records (for dane). ideally it would be upstreamed, but the chances seem slim. dnssec-awareness is added to all packages, e.g. spf, dkim, dmarc, iprev. their dnssec status is added to the Received message headers for incoming email. but the main reason to add dnssec was for implementing dane. with dane, the verification of tls certificates can be done through certificates/public keys published in dns (in the tlsa records). this only makes sense (is trustworthy) if those dns records can be verified to be authentic. mox now applies dane to delivering messages over smtp. mox already implemented mta-sts for webpki/pkix-verification of certificates against the (large) pool of CA's, and still enforces those policies when present. but it now also checks for dane records, and will verify those if present. if dane and mta-sts are both absent, the regular opportunistic tls with starttls is still done. and the fallback to plaintext is also still done. mox also makes it easy to setup dane for incoming deliveries, so other servers can deliver with dane tls certificate verification. the quickstart now generates private keys that are used when requesting certificates with acme. the private keys are pre-generated because they must be static and known during setup, because their public keys must be published in tlsa records in dns. autocert would generate private keys on its own, so had to be forked to add the option to provide the private key when requesting a new certificate. hopefully upstream will accept the change and we can drop the fork. with this change, using the quickstart to setup a new mox instance, the checks at internet.nl result in a 100% score, provided the domain is dnssec-signed and the network doesn't have any issues.
2023-10-10 13:09:35 +03:00
defer func() {
smtpclient.DialHook = nil
}()
2023-01-30 16:27:06 +03:00
launchWork(resolver, map[string]struct{}{})
implement dnssec-awareness throughout code, and dane for incoming/outgoing mail delivery the vendored dns resolver code is a copy of the go stdlib dns resolver, with awareness of the "authentic data" (i.e. dnssec secure) added, as well as support for enhanced dns errors, and looking up tlsa records (for dane). ideally it would be upstreamed, but the chances seem slim. dnssec-awareness is added to all packages, e.g. spf, dkim, dmarc, iprev. their dnssec status is added to the Received message headers for incoming email. but the main reason to add dnssec was for implementing dane. with dane, the verification of tls certificates can be done through certificates/public keys published in dns (in the tlsa records). this only makes sense (is trustworthy) if those dns records can be verified to be authentic. mox now applies dane to delivering messages over smtp. mox already implemented mta-sts for webpki/pkix-verification of certificates against the (large) pool of CA's, and still enforces those policies when present. but it now also checks for dane records, and will verify those if present. if dane and mta-sts are both absent, the regular opportunistic tls with starttls is still done. and the fallback to plaintext is also still done. mox also makes it easy to setup dane for incoming deliveries, so other servers can deliver with dane tls certificate verification. the quickstart now generates private keys that are used when requesting certificates with acme. the private keys are pre-generated because they must be static and known during setup, because their public keys must be published in tlsa records in dns. autocert would generate private keys on its own, so had to be forked to add the option to provide the private key when requesting a new certificate. hopefully upstream will accept the change and we can drop the fork. with this change, using the quickstart to setup a new mox instance, the checks at internet.nl result in a 100% score, provided the domain is dnssec-signed and the network doesn't have any issues.
2023-10-10 13:09:35 +03:00
moxCert := fakeCert(t, "mox.example", false)
2023-01-30 16:27:06 +03:00
// Wait until we see the dial and the failed attempt.
timer := time.NewTimer(time.Second)
defer timer.Stop()
select {
case <-dialed:
i := 0
for {
m, err := bstore.QueryDB[Msg](ctxbg, DB).Get()
2023-01-30 16:27:06 +03:00
tcheck(t, err, "get")
if m.Attempts == 1 {
break
}
i++
if i == 10 {
t.Fatalf("message in queue not updated")
}
time.Sleep(100 * time.Millisecond)
}
case <-timer.C:
t.Fatalf("no dial within 1s")
}
<-deliveryResult // Deliver sends here.
_, err = OpenMessage(ctxbg, msg.ID+1)
2023-01-30 16:27:06 +03:00
if err != bstore.ErrAbsent {
t.Fatalf("OpenMessage, got %v, expected ErrAbsent", err)
}
reader, err := OpenMessage(ctxbg, msg.ID)
2023-01-30 16:27:06 +03:00
tcheck(t, err, "open message")
defer reader.Close()
msgbuf, err := io.ReadAll(reader)
tcheck(t, err, "read message")
if string(msgbuf) != testmsg {
t.Fatalf("message mismatch, got %q, expected %q", string(msgbuf), testmsg)
}
new feature: when delivering messages from the queue, make it possible to use a "transport" the default transport is still just "direct delivery", where we connect to the destination domain's MX servers. other transports are: - regular smtp without authentication, this is relaying to a smarthost. - submission with authentication, e.g. to a third party email sending service. - direct delivery, but with with connections going through a socks proxy. this can be helpful if your ip is blocked, you need to get email out, and you have another IP that isn't blocked. keep in mind that for all of the above, appropriate SPF/DKIM settings have to be configured. the "dnscheck" for a domain does a check for any SOCKS IP in the SPF record. SPF for smtp/submission (ranges? includes?) and any DKIM requirements cannot really be checked. which transport is used can be configured through routes. routes can be set on an account, a domain, or globally. the routes are evaluated in that order, with the first match selecting the transport. these routes are evaluated for each delivery attempt. common selection criteria are recipient domain and sender domain, but also which delivery attempt this is. you could configured mox to attempt sending through a 3rd party from the 4th attempt onwards. routes and transports are optional. if no route matches, or an empty/zero transport is selected, normal direct delivery is done. we could already "submit" emails with 3rd party accounts with "sendmail". but we now support more SASL authentication mechanisms with SMTP (not only PLAIN, but also SCRAM-SHA-256, SCRAM-SHA-1 and CRAM-MD5), which sendmail now also supports. sendmail will use the most secure mechanism supported by the server, or the explicitly configured mechanism. for issue #36 by dmikushin. also based on earlier discussion on hackernews.
2023-06-16 19:38:28 +03:00
n, err = Kick(ctxbg, msg.ID+1, "", "", nil)
2023-01-30 16:27:06 +03:00
tcheck(t, err, "kick")
if n != 0 {
t.Fatalf("kick %d, expected 0", n)
}
new feature: when delivering messages from the queue, make it possible to use a "transport" the default transport is still just "direct delivery", where we connect to the destination domain's MX servers. other transports are: - regular smtp without authentication, this is relaying to a smarthost. - submission with authentication, e.g. to a third party email sending service. - direct delivery, but with with connections going through a socks proxy. this can be helpful if your ip is blocked, you need to get email out, and you have another IP that isn't blocked. keep in mind that for all of the above, appropriate SPF/DKIM settings have to be configured. the "dnscheck" for a domain does a check for any SOCKS IP in the SPF record. SPF for smtp/submission (ranges? includes?) and any DKIM requirements cannot really be checked. which transport is used can be configured through routes. routes can be set on an account, a domain, or globally. the routes are evaluated in that order, with the first match selecting the transport. these routes are evaluated for each delivery attempt. common selection criteria are recipient domain and sender domain, but also which delivery attempt this is. you could configured mox to attempt sending through a 3rd party from the 4th attempt onwards. routes and transports are optional. if no route matches, or an empty/zero transport is selected, normal direct delivery is done. we could already "submit" emails with 3rd party accounts with "sendmail". but we now support more SASL authentication mechanisms with SMTP (not only PLAIN, but also SCRAM-SHA-256, SCRAM-SHA-1 and CRAM-MD5), which sendmail now also supports. sendmail will use the most secure mechanism supported by the server, or the explicitly configured mechanism. for issue #36 by dmikushin. also based on earlier discussion on hackernews.
2023-06-16 19:38:28 +03:00
n, err = Kick(ctxbg, msg.ID, "", "", nil)
2023-01-30 16:27:06 +03:00
tcheck(t, err, "kick")
if n != 1 {
t.Fatalf("kicked %d, expected 1", n)
}
smtpdone := make(chan struct{})
new feature: when delivering messages from the queue, make it possible to use a "transport" the default transport is still just "direct delivery", where we connect to the destination domain's MX servers. other transports are: - regular smtp without authentication, this is relaying to a smarthost. - submission with authentication, e.g. to a third party email sending service. - direct delivery, but with with connections going through a socks proxy. this can be helpful if your ip is blocked, you need to get email out, and you have another IP that isn't blocked. keep in mind that for all of the above, appropriate SPF/DKIM settings have to be configured. the "dnscheck" for a domain does a check for any SOCKS IP in the SPF record. SPF for smtp/submission (ranges? includes?) and any DKIM requirements cannot really be checked. which transport is used can be configured through routes. routes can be set on an account, a domain, or globally. the routes are evaluated in that order, with the first match selecting the transport. these routes are evaluated for each delivery attempt. common selection criteria are recipient domain and sender domain, but also which delivery attempt this is. you could configured mox to attempt sending through a 3rd party from the 4th attempt onwards. routes and transports are optional. if no route matches, or an empty/zero transport is selected, normal direct delivery is done. we could already "submit" emails with 3rd party accounts with "sendmail". but we now support more SASL authentication mechanisms with SMTP (not only PLAIN, but also SCRAM-SHA-256, SCRAM-SHA-1 and CRAM-MD5), which sendmail now also supports. sendmail will use the most secure mechanism supported by the server, or the explicitly configured mechanism. for issue #36 by dmikushin. also based on earlier discussion on hackernews.
2023-06-16 19:38:28 +03:00
fakeSMTPServer := func(server net.Conn) {
2023-01-30 16:27:06 +03:00
// We do a minimal fake smtp server. We cannot import smtpserver.Serve due to cyclic dependencies.
fmt.Fprintf(server, "220 mox.example\r\n")
br := bufio.NewReader(server)
implement dnssec-awareness throughout code, and dane for incoming/outgoing mail delivery the vendored dns resolver code is a copy of the go stdlib dns resolver, with awareness of the "authentic data" (i.e. dnssec secure) added, as well as support for enhanced dns errors, and looking up tlsa records (for dane). ideally it would be upstreamed, but the chances seem slim. dnssec-awareness is added to all packages, e.g. spf, dkim, dmarc, iprev. their dnssec status is added to the Received message headers for incoming email. but the main reason to add dnssec was for implementing dane. with dane, the verification of tls certificates can be done through certificates/public keys published in dns (in the tlsa records). this only makes sense (is trustworthy) if those dns records can be verified to be authentic. mox now applies dane to delivering messages over smtp. mox already implemented mta-sts for webpki/pkix-verification of certificates against the (large) pool of CA's, and still enforces those policies when present. but it now also checks for dane records, and will verify those if present. if dane and mta-sts are both absent, the regular opportunistic tls with starttls is still done. and the fallback to plaintext is also still done. mox also makes it easy to setup dane for incoming deliveries, so other servers can deliver with dane tls certificate verification. the quickstart now generates private keys that are used when requesting certificates with acme. the private keys are pre-generated because they must be static and known during setup, because their public keys must be published in tlsa records in dns. autocert would generate private keys on its own, so had to be forked to add the option to provide the private key when requesting a new certificate. hopefully upstream will accept the change and we can drop the fork. with this change, using the quickstart to setup a new mox instance, the checks at internet.nl result in a 100% score, provided the domain is dnssec-signed and the network doesn't have any issues.
2023-10-10 13:09:35 +03:00
readline := func(cmd string) {
line, err := br.ReadString('\n')
if err == nil && !strings.HasPrefix(strings.ToLower(line), cmd) {
panic(fmt.Sprintf("unexpected line %q, expected %q", line, cmd))
}
}
writeline := func(s string) {
fmt.Fprintf(server, "%s\r\n", s)
}
readline("ehlo")
writeline("250 mox.example")
readline("mail")
writeline("250 ok")
readline("rcpt")
writeline("250 ok")
readline("data")
writeline("354 continue")
2023-01-30 16:27:06 +03:00
reader := smtp.NewDataReader(br)
io.Copy(io.Discard, reader)
implement dnssec-awareness throughout code, and dane for incoming/outgoing mail delivery the vendored dns resolver code is a copy of the go stdlib dns resolver, with awareness of the "authentic data" (i.e. dnssec secure) added, as well as support for enhanced dns errors, and looking up tlsa records (for dane). ideally it would be upstreamed, but the chances seem slim. dnssec-awareness is added to all packages, e.g. spf, dkim, dmarc, iprev. their dnssec status is added to the Received message headers for incoming email. but the main reason to add dnssec was for implementing dane. with dane, the verification of tls certificates can be done through certificates/public keys published in dns (in the tlsa records). this only makes sense (is trustworthy) if those dns records can be verified to be authentic. mox now applies dane to delivering messages over smtp. mox already implemented mta-sts for webpki/pkix-verification of certificates against the (large) pool of CA's, and still enforces those policies when present. but it now also checks for dane records, and will verify those if present. if dane and mta-sts are both absent, the regular opportunistic tls with starttls is still done. and the fallback to plaintext is also still done. mox also makes it easy to setup dane for incoming deliveries, so other servers can deliver with dane tls certificate verification. the quickstart now generates private keys that are used when requesting certificates with acme. the private keys are pre-generated because they must be static and known during setup, because their public keys must be published in tlsa records in dns. autocert would generate private keys on its own, so had to be forked to add the option to provide the private key when requesting a new certificate. hopefully upstream will accept the change and we can drop the fork. with this change, using the quickstart to setup a new mox instance, the checks at internet.nl result in a 100% score, provided the domain is dnssec-signed and the network doesn't have any issues.
2023-10-10 13:09:35 +03:00
writeline("250 ok")
readline("quit")
writeline("221 ok")
2023-01-30 16:27:06 +03:00
smtpdone <- struct{}{}
new feature: when delivering messages from the queue, make it possible to use a "transport" the default transport is still just "direct delivery", where we connect to the destination domain's MX servers. other transports are: - regular smtp without authentication, this is relaying to a smarthost. - submission with authentication, e.g. to a third party email sending service. - direct delivery, but with with connections going through a socks proxy. this can be helpful if your ip is blocked, you need to get email out, and you have another IP that isn't blocked. keep in mind that for all of the above, appropriate SPF/DKIM settings have to be configured. the "dnscheck" for a domain does a check for any SOCKS IP in the SPF record. SPF for smtp/submission (ranges? includes?) and any DKIM requirements cannot really be checked. which transport is used can be configured through routes. routes can be set on an account, a domain, or globally. the routes are evaluated in that order, with the first match selecting the transport. these routes are evaluated for each delivery attempt. common selection criteria are recipient domain and sender domain, but also which delivery attempt this is. you could configured mox to attempt sending through a 3rd party from the 4th attempt onwards. routes and transports are optional. if no route matches, or an empty/zero transport is selected, normal direct delivery is done. we could already "submit" emails with 3rd party accounts with "sendmail". but we now support more SASL authentication mechanisms with SMTP (not only PLAIN, but also SCRAM-SHA-256, SCRAM-SHA-1 and CRAM-MD5), which sendmail now also supports. sendmail will use the most secure mechanism supported by the server, or the explicitly configured mechanism. for issue #36 by dmikushin. also based on earlier discussion on hackernews.
2023-06-16 19:38:28 +03:00
}
2023-01-30 16:27:06 +03:00
implement dnssec-awareness throughout code, and dane for incoming/outgoing mail delivery the vendored dns resolver code is a copy of the go stdlib dns resolver, with awareness of the "authentic data" (i.e. dnssec secure) added, as well as support for enhanced dns errors, and looking up tlsa records (for dane). ideally it would be upstreamed, but the chances seem slim. dnssec-awareness is added to all packages, e.g. spf, dkim, dmarc, iprev. their dnssec status is added to the Received message headers for incoming email. but the main reason to add dnssec was for implementing dane. with dane, the verification of tls certificates can be done through certificates/public keys published in dns (in the tlsa records). this only makes sense (is trustworthy) if those dns records can be verified to be authentic. mox now applies dane to delivering messages over smtp. mox already implemented mta-sts for webpki/pkix-verification of certificates against the (large) pool of CA's, and still enforces those policies when present. but it now also checks for dane records, and will verify those if present. if dane and mta-sts are both absent, the regular opportunistic tls with starttls is still done. and the fallback to plaintext is also still done. mox also makes it easy to setup dane for incoming deliveries, so other servers can deliver with dane tls certificate verification. the quickstart now generates private keys that are used when requesting certificates with acme. the private keys are pre-generated because they must be static and known during setup, because their public keys must be published in tlsa records in dns. autocert would generate private keys on its own, so had to be forked to add the option to provide the private key when requesting a new certificate. hopefully upstream will accept the change and we can drop the fork. with this change, using the quickstart to setup a new mox instance, the checks at internet.nl result in a 100% score, provided the domain is dnssec-signed and the network doesn't have any issues.
2023-10-10 13:09:35 +03:00
goodTLSConfig := tls.Config{Certificates: []tls.Certificate{moxCert}}
makeFakeSMTPSTARTTLSServer := func(tlsConfig *tls.Config, nstarttls int) func(server net.Conn) {
attempt := 0
return func(server net.Conn) {
attempt++
// We do a minimal fake smtp server. We cannot import smtpserver.Serve due to cyclic dependencies.
fmt.Fprintf(server, "220 mox.example\r\n")
br := bufio.NewReader(server)
readline := func(cmd string) {
line, err := br.ReadString('\n')
if err == nil && !strings.HasPrefix(strings.ToLower(line), cmd) {
panic(fmt.Sprintf("unexpected line %q, expected %q", line, cmd))
}
}
writeline := func(s string) {
fmt.Fprintf(server, "%s\r\n", s)
}
readline("ehlo")
writeline("250-mox.example")
writeline("250 starttls")
if nstarttls == 0 || attempt <= nstarttls {
readline("starttls")
writeline("220 ok")
tlsConn := tls.Server(server, tlsConfig)
err := tlsConn.Handshake()
if err != nil {
return
}
server = tlsConn
br = bufio.NewReader(server)
readline("ehlo")
writeline("250 mox.example")
}
readline("mail")
writeline("250 ok")
readline("rcpt")
writeline("250 ok")
readline("data")
writeline("354 continue")
reader := smtp.NewDataReader(br)
io.Copy(io.Discard, reader)
writeline("250 ok")
readline("quit")
writeline("221 ok")
smtpdone <- struct{}{}
}
}
fakeSMTPSTARTTLSServer := makeFakeSMTPSTARTTLSServer(&goodTLSConfig, 0)
makeBadFakeSMTPSTARTTLSServer := func() func(server net.Conn) {
return makeFakeSMTPSTARTTLSServer(&tls.Config{MaxVersion: tls.VersionTLS10, Certificates: []tls.Certificate{moxCert}}, 1)
}
new feature: when delivering messages from the queue, make it possible to use a "transport" the default transport is still just "direct delivery", where we connect to the destination domain's MX servers. other transports are: - regular smtp without authentication, this is relaying to a smarthost. - submission with authentication, e.g. to a third party email sending service. - direct delivery, but with with connections going through a socks proxy. this can be helpful if your ip is blocked, you need to get email out, and you have another IP that isn't blocked. keep in mind that for all of the above, appropriate SPF/DKIM settings have to be configured. the "dnscheck" for a domain does a check for any SOCKS IP in the SPF record. SPF for smtp/submission (ranges? includes?) and any DKIM requirements cannot really be checked. which transport is used can be configured through routes. routes can be set on an account, a domain, or globally. the routes are evaluated in that order, with the first match selecting the transport. these routes are evaluated for each delivery attempt. common selection criteria are recipient domain and sender domain, but also which delivery attempt this is. you could configured mox to attempt sending through a 3rd party from the 4th attempt onwards. routes and transports are optional. if no route matches, or an empty/zero transport is selected, normal direct delivery is done. we could already "submit" emails with 3rd party accounts with "sendmail". but we now support more SASL authentication mechanisms with SMTP (not only PLAIN, but also SCRAM-SHA-256, SCRAM-SHA-1 and CRAM-MD5), which sendmail now also supports. sendmail will use the most secure mechanism supported by the server, or the explicitly configured mechanism. for issue #36 by dmikushin. also based on earlier discussion on hackernews.
2023-06-16 19:38:28 +03:00
fakeSubmitServer := func(server net.Conn) {
// We do a minimal fake smtp server. We cannot import smtpserver.Serve due to cyclic dependencies.
fmt.Fprintf(server, "220 mox.example\r\n")
br := bufio.NewReader(server)
br.ReadString('\n') // Should be EHLO.
fmt.Fprintf(server, "250-localhost\r\n")
fmt.Fprintf(server, "250 AUTH PLAIN\r\n")
br.ReadString('\n') // Should be AUTH PLAIN
fmt.Fprintf(server, "235 2.7.0 auth ok\r\n")
br.ReadString('\n') // Should be MAIL FROM.
fmt.Fprintf(server, "250 ok\r\n")
br.ReadString('\n') // Should be RCPT TO.
fmt.Fprintf(server, "250 ok\r\n")
br.ReadString('\n') // Should be DATA.
fmt.Fprintf(server, "354 continue\r\n")
reader := smtp.NewDataReader(br)
io.Copy(io.Discard, reader)
fmt.Fprintf(server, "250 ok\r\n")
br.ReadString('\n') // Should be QUIT.
fmt.Fprintf(server, "221 ok\r\n")
smtpdone <- struct{}{}
2023-01-30 16:27:06 +03:00
}
new feature: when delivering messages from the queue, make it possible to use a "transport" the default transport is still just "direct delivery", where we connect to the destination domain's MX servers. other transports are: - regular smtp without authentication, this is relaying to a smarthost. - submission with authentication, e.g. to a third party email sending service. - direct delivery, but with with connections going through a socks proxy. this can be helpful if your ip is blocked, you need to get email out, and you have another IP that isn't blocked. keep in mind that for all of the above, appropriate SPF/DKIM settings have to be configured. the "dnscheck" for a domain does a check for any SOCKS IP in the SPF record. SPF for smtp/submission (ranges? includes?) and any DKIM requirements cannot really be checked. which transport is used can be configured through routes. routes can be set on an account, a domain, or globally. the routes are evaluated in that order, with the first match selecting the transport. these routes are evaluated for each delivery attempt. common selection criteria are recipient domain and sender domain, but also which delivery attempt this is. you could configured mox to attempt sending through a 3rd party from the 4th attempt onwards. routes and transports are optional. if no route matches, or an empty/zero transport is selected, normal direct delivery is done. we could already "submit" emails with 3rd party accounts with "sendmail". but we now support more SASL authentication mechanisms with SMTP (not only PLAIN, but also SCRAM-SHA-256, SCRAM-SHA-1 and CRAM-MD5), which sendmail now also supports. sendmail will use the most secure mechanism supported by the server, or the explicitly configured mechanism. for issue #36 by dmikushin. also based on earlier discussion on hackernews.
2023-06-16 19:38:28 +03:00
testDeliver := func(fakeServer func(conn net.Conn)) bool {
t.Helper()
implement dnssec-awareness throughout code, and dane for incoming/outgoing mail delivery the vendored dns resolver code is a copy of the go stdlib dns resolver, with awareness of the "authentic data" (i.e. dnssec secure) added, as well as support for enhanced dns errors, and looking up tlsa records (for dane). ideally it would be upstreamed, but the chances seem slim. dnssec-awareness is added to all packages, e.g. spf, dkim, dmarc, iprev. their dnssec status is added to the Received message headers for incoming email. but the main reason to add dnssec was for implementing dane. with dane, the verification of tls certificates can be done through certificates/public keys published in dns (in the tlsa records). this only makes sense (is trustworthy) if those dns records can be verified to be authentic. mox now applies dane to delivering messages over smtp. mox already implemented mta-sts for webpki/pkix-verification of certificates against the (large) pool of CA's, and still enforces those policies when present. but it now also checks for dane records, and will verify those if present. if dane and mta-sts are both absent, the regular opportunistic tls with starttls is still done. and the fallback to plaintext is also still done. mox also makes it easy to setup dane for incoming deliveries, so other servers can deliver with dane tls certificate verification. the quickstart now generates private keys that are used when requesting certificates with acme. the private keys are pre-generated because they must be static and known during setup, because their public keys must be published in tlsa records in dns. autocert would generate private keys on its own, so had to be forked to add the option to provide the private key when requesting a new certificate. hopefully upstream will accept the change and we can drop the fork. with this change, using the quickstart to setup a new mox instance, the checks at internet.nl result in a 100% score, provided the domain is dnssec-signed and the network doesn't have any issues.
2023-10-10 13:09:35 +03:00
var pipes []net.Conn
defer func() {
for _, conn := range pipes {
conn.Close()
}
}()
new feature: when delivering messages from the queue, make it possible to use a "transport" the default transport is still just "direct delivery", where we connect to the destination domain's MX servers. other transports are: - regular smtp without authentication, this is relaying to a smarthost. - submission with authentication, e.g. to a third party email sending service. - direct delivery, but with with connections going through a socks proxy. this can be helpful if your ip is blocked, you need to get email out, and you have another IP that isn't blocked. keep in mind that for all of the above, appropriate SPF/DKIM settings have to be configured. the "dnscheck" for a domain does a check for any SOCKS IP in the SPF record. SPF for smtp/submission (ranges? includes?) and any DKIM requirements cannot really be checked. which transport is used can be configured through routes. routes can be set on an account, a domain, or globally. the routes are evaluated in that order, with the first match selecting the transport. these routes are evaluated for each delivery attempt. common selection criteria are recipient domain and sender domain, but also which delivery attempt this is. you could configured mox to attempt sending through a 3rd party from the 4th attempt onwards. routes and transports are optional. if no route matches, or an empty/zero transport is selected, normal direct delivery is done. we could already "submit" emails with 3rd party accounts with "sendmail". but we now support more SASL authentication mechanisms with SMTP (not only PLAIN, but also SCRAM-SHA-256, SCRAM-SHA-1 and CRAM-MD5), which sendmail now also supports. sendmail will use the most secure mechanism supported by the server, or the explicitly configured mechanism. for issue #36 by dmikushin. also based on earlier discussion on hackernews.
2023-06-16 19:38:28 +03:00
var wasNetDialer bool
implement dnssec-awareness throughout code, and dane for incoming/outgoing mail delivery the vendored dns resolver code is a copy of the go stdlib dns resolver, with awareness of the "authentic data" (i.e. dnssec secure) added, as well as support for enhanced dns errors, and looking up tlsa records (for dane). ideally it would be upstreamed, but the chances seem slim. dnssec-awareness is added to all packages, e.g. spf, dkim, dmarc, iprev. their dnssec status is added to the Received message headers for incoming email. but the main reason to add dnssec was for implementing dane. with dane, the verification of tls certificates can be done through certificates/public keys published in dns (in the tlsa records). this only makes sense (is trustworthy) if those dns records can be verified to be authentic. mox now applies dane to delivering messages over smtp. mox already implemented mta-sts for webpki/pkix-verification of certificates against the (large) pool of CA's, and still enforces those policies when present. but it now also checks for dane records, and will verify those if present. if dane and mta-sts are both absent, the regular opportunistic tls with starttls is still done. and the fallback to plaintext is also still done. mox also makes it easy to setup dane for incoming deliveries, so other servers can deliver with dane tls certificate verification. the quickstart now generates private keys that are used when requesting certificates with acme. the private keys are pre-generated because they must be static and known during setup, because their public keys must be published in tlsa records in dns. autocert would generate private keys on its own, so had to be forked to add the option to provide the private key when requesting a new certificate. hopefully upstream will accept the change and we can drop the fork. with this change, using the quickstart to setup a new mox instance, the checks at internet.nl result in a 100% score, provided the domain is dnssec-signed and the network doesn't have any issues.
2023-10-10 13:09:35 +03:00
smtpclient.DialHook = func(ctx context.Context, dialer smtpclient.Dialer, timeout time.Duration, addr string, laddr net.Addr) (net.Conn, error) {
// Setting up a pipe. We'll start a fake smtp server on the server-side. And return the
// client-side to the invocation dial, for the attempted delivery from the queue.
server, client := net.Pipe()
for _, c := range pipes {
c.Close()
}
pipes = []net.Conn{server, client}
go fakeServer(server)
new feature: when delivering messages from the queue, make it possible to use a "transport" the default transport is still just "direct delivery", where we connect to the destination domain's MX servers. other transports are: - regular smtp without authentication, this is relaying to a smarthost. - submission with authentication, e.g. to a third party email sending service. - direct delivery, but with with connections going through a socks proxy. this can be helpful if your ip is blocked, you need to get email out, and you have another IP that isn't blocked. keep in mind that for all of the above, appropriate SPF/DKIM settings have to be configured. the "dnscheck" for a domain does a check for any SOCKS IP in the SPF record. SPF for smtp/submission (ranges? includes?) and any DKIM requirements cannot really be checked. which transport is used can be configured through routes. routes can be set on an account, a domain, or globally. the routes are evaluated in that order, with the first match selecting the transport. these routes are evaluated for each delivery attempt. common selection criteria are recipient domain and sender domain, but also which delivery attempt this is. you could configured mox to attempt sending through a 3rd party from the 4th attempt onwards. routes and transports are optional. if no route matches, or an empty/zero transport is selected, normal direct delivery is done. we could already "submit" emails with 3rd party accounts with "sendmail". but we now support more SASL authentication mechanisms with SMTP (not only PLAIN, but also SCRAM-SHA-256, SCRAM-SHA-1 and CRAM-MD5), which sendmail now also supports. sendmail will use the most secure mechanism supported by the server, or the explicitly configured mechanism. for issue #36 by dmikushin. also based on earlier discussion on hackernews.
2023-06-16 19:38:28 +03:00
_, wasNetDialer = dialer.(*net.Dialer)
implement dnssec-awareness throughout code, and dane for incoming/outgoing mail delivery the vendored dns resolver code is a copy of the go stdlib dns resolver, with awareness of the "authentic data" (i.e. dnssec secure) added, as well as support for enhanced dns errors, and looking up tlsa records (for dane). ideally it would be upstreamed, but the chances seem slim. dnssec-awareness is added to all packages, e.g. spf, dkim, dmarc, iprev. their dnssec status is added to the Received message headers for incoming email. but the main reason to add dnssec was for implementing dane. with dane, the verification of tls certificates can be done through certificates/public keys published in dns (in the tlsa records). this only makes sense (is trustworthy) if those dns records can be verified to be authentic. mox now applies dane to delivering messages over smtp. mox already implemented mta-sts for webpki/pkix-verification of certificates against the (large) pool of CA's, and still enforces those policies when present. but it now also checks for dane records, and will verify those if present. if dane and mta-sts are both absent, the regular opportunistic tls with starttls is still done. and the fallback to plaintext is also still done. mox also makes it easy to setup dane for incoming deliveries, so other servers can deliver with dane tls certificate verification. the quickstart now generates private keys that are used when requesting certificates with acme. the private keys are pre-generated because they must be static and known during setup, because their public keys must be published in tlsa records in dns. autocert would generate private keys on its own, so had to be forked to add the option to provide the private key when requesting a new certificate. hopefully upstream will accept the change and we can drop the fork. with this change, using the quickstart to setup a new mox instance, the checks at internet.nl result in a 100% score, provided the domain is dnssec-signed and the network doesn't have any issues.
2023-10-10 13:09:35 +03:00
// For reconnects, we are already waiting for delivery below.
select {
case dialed <- struct{}{}:
default:
}
new feature: when delivering messages from the queue, make it possible to use a "transport" the default transport is still just "direct delivery", where we connect to the destination domain's MX servers. other transports are: - regular smtp without authentication, this is relaying to a smarthost. - submission with authentication, e.g. to a third party email sending service. - direct delivery, but with with connections going through a socks proxy. this can be helpful if your ip is blocked, you need to get email out, and you have another IP that isn't blocked. keep in mind that for all of the above, appropriate SPF/DKIM settings have to be configured. the "dnscheck" for a domain does a check for any SOCKS IP in the SPF record. SPF for smtp/submission (ranges? includes?) and any DKIM requirements cannot really be checked. which transport is used can be configured through routes. routes can be set on an account, a domain, or globally. the routes are evaluated in that order, with the first match selecting the transport. these routes are evaluated for each delivery attempt. common selection criteria are recipient domain and sender domain, but also which delivery attempt this is. you could configured mox to attempt sending through a 3rd party from the 4th attempt onwards. routes and transports are optional. if no route matches, or an empty/zero transport is selected, normal direct delivery is done. we could already "submit" emails with 3rd party accounts with "sendmail". but we now support more SASL authentication mechanisms with SMTP (not only PLAIN, but also SCRAM-SHA-256, SCRAM-SHA-1 and CRAM-MD5), which sendmail now also supports. sendmail will use the most secure mechanism supported by the server, or the explicitly configured mechanism. for issue #36 by dmikushin. also based on earlier discussion on hackernews.
2023-06-16 19:38:28 +03:00
return client, nil
}
implement dnssec-awareness throughout code, and dane for incoming/outgoing mail delivery the vendored dns resolver code is a copy of the go stdlib dns resolver, with awareness of the "authentic data" (i.e. dnssec secure) added, as well as support for enhanced dns errors, and looking up tlsa records (for dane). ideally it would be upstreamed, but the chances seem slim. dnssec-awareness is added to all packages, e.g. spf, dkim, dmarc, iprev. their dnssec status is added to the Received message headers for incoming email. but the main reason to add dnssec was for implementing dane. with dane, the verification of tls certificates can be done through certificates/public keys published in dns (in the tlsa records). this only makes sense (is trustworthy) if those dns records can be verified to be authentic. mox now applies dane to delivering messages over smtp. mox already implemented mta-sts for webpki/pkix-verification of certificates against the (large) pool of CA's, and still enforces those policies when present. but it now also checks for dane records, and will verify those if present. if dane and mta-sts are both absent, the regular opportunistic tls with starttls is still done. and the fallback to plaintext is also still done. mox also makes it easy to setup dane for incoming deliveries, so other servers can deliver with dane tls certificate verification. the quickstart now generates private keys that are used when requesting certificates with acme. the private keys are pre-generated because they must be static and known during setup, because their public keys must be published in tlsa records in dns. autocert would generate private keys on its own, so had to be forked to add the option to provide the private key when requesting a new certificate. hopefully upstream will accept the change and we can drop the fork. with this change, using the quickstart to setup a new mox instance, the checks at internet.nl result in a 100% score, provided the domain is dnssec-signed and the network doesn't have any issues.
2023-10-10 13:09:35 +03:00
defer func() {
smtpclient.DialHook = nil
}()
new feature: when delivering messages from the queue, make it possible to use a "transport" the default transport is still just "direct delivery", where we connect to the destination domain's MX servers. other transports are: - regular smtp without authentication, this is relaying to a smarthost. - submission with authentication, e.g. to a third party email sending service. - direct delivery, but with with connections going through a socks proxy. this can be helpful if your ip is blocked, you need to get email out, and you have another IP that isn't blocked. keep in mind that for all of the above, appropriate SPF/DKIM settings have to be configured. the "dnscheck" for a domain does a check for any SOCKS IP in the SPF record. SPF for smtp/submission (ranges? includes?) and any DKIM requirements cannot really be checked. which transport is used can be configured through routes. routes can be set on an account, a domain, or globally. the routes are evaluated in that order, with the first match selecting the transport. these routes are evaluated for each delivery attempt. common selection criteria are recipient domain and sender domain, but also which delivery attempt this is. you could configured mox to attempt sending through a 3rd party from the 4th attempt onwards. routes and transports are optional. if no route matches, or an empty/zero transport is selected, normal direct delivery is done. we could already "submit" emails with 3rd party accounts with "sendmail". but we now support more SASL authentication mechanisms with SMTP (not only PLAIN, but also SCRAM-SHA-256, SCRAM-SHA-1 and CRAM-MD5), which sendmail now also supports. sendmail will use the most secure mechanism supported by the server, or the explicitly configured mechanism. for issue #36 by dmikushin. also based on earlier discussion on hackernews.
2023-06-16 19:38:28 +03:00
waitDeliver := func() {
t.Helper()
timer.Reset(time.Second)
select {
case <-dialed:
select {
case <-smtpdone:
i := 0
for {
xmsgs, err := List(ctxbg)
tcheck(t, err, "list queue")
if len(xmsgs) == 0 {
break
}
i++
if i == 10 {
t.Fatalf("%d messages in queue, expected 0", len(xmsgs))
}
time.Sleep(100 * time.Millisecond)
}
case <-timer.C:
t.Fatalf("no deliver within 1s")
2023-01-30 16:27:06 +03:00
}
new feature: when delivering messages from the queue, make it possible to use a "transport" the default transport is still just "direct delivery", where we connect to the destination domain's MX servers. other transports are: - regular smtp without authentication, this is relaying to a smarthost. - submission with authentication, e.g. to a third party email sending service. - direct delivery, but with with connections going through a socks proxy. this can be helpful if your ip is blocked, you need to get email out, and you have another IP that isn't blocked. keep in mind that for all of the above, appropriate SPF/DKIM settings have to be configured. the "dnscheck" for a domain does a check for any SOCKS IP in the SPF record. SPF for smtp/submission (ranges? includes?) and any DKIM requirements cannot really be checked. which transport is used can be configured through routes. routes can be set on an account, a domain, or globally. the routes are evaluated in that order, with the first match selecting the transport. these routes are evaluated for each delivery attempt. common selection criteria are recipient domain and sender domain, but also which delivery attempt this is. you could configured mox to attempt sending through a 3rd party from the 4th attempt onwards. routes and transports are optional. if no route matches, or an empty/zero transport is selected, normal direct delivery is done. we could already "submit" emails with 3rd party accounts with "sendmail". but we now support more SASL authentication mechanisms with SMTP (not only PLAIN, but also SCRAM-SHA-256, SCRAM-SHA-1 and CRAM-MD5), which sendmail now also supports. sendmail will use the most secure mechanism supported by the server, or the explicitly configured mechanism. for issue #36 by dmikushin. also based on earlier discussion on hackernews.
2023-06-16 19:38:28 +03:00
case <-timer.C:
t.Fatalf("no dial within 1s")
2023-01-30 16:27:06 +03:00
}
new feature: when delivering messages from the queue, make it possible to use a "transport" the default transport is still just "direct delivery", where we connect to the destination domain's MX servers. other transports are: - regular smtp without authentication, this is relaying to a smarthost. - submission with authentication, e.g. to a third party email sending service. - direct delivery, but with with connections going through a socks proxy. this can be helpful if your ip is blocked, you need to get email out, and you have another IP that isn't blocked. keep in mind that for all of the above, appropriate SPF/DKIM settings have to be configured. the "dnscheck" for a domain does a check for any SOCKS IP in the SPF record. SPF for smtp/submission (ranges? includes?) and any DKIM requirements cannot really be checked. which transport is used can be configured through routes. routes can be set on an account, a domain, or globally. the routes are evaluated in that order, with the first match selecting the transport. these routes are evaluated for each delivery attempt. common selection criteria are recipient domain and sender domain, but also which delivery attempt this is. you could configured mox to attempt sending through a 3rd party from the 4th attempt onwards. routes and transports are optional. if no route matches, or an empty/zero transport is selected, normal direct delivery is done. we could already "submit" emails with 3rd party accounts with "sendmail". but we now support more SASL authentication mechanisms with SMTP (not only PLAIN, but also SCRAM-SHA-256, SCRAM-SHA-1 and CRAM-MD5), which sendmail now also supports. sendmail will use the most secure mechanism supported by the server, or the explicitly configured mechanism. for issue #36 by dmikushin. also based on earlier discussion on hackernews.
2023-06-16 19:38:28 +03:00
<-deliveryResult // Deliver sends here.
2023-01-30 16:27:06 +03:00
}
new feature: when delivering messages from the queue, make it possible to use a "transport" the default transport is still just "direct delivery", where we connect to the destination domain's MX servers. other transports are: - regular smtp without authentication, this is relaying to a smarthost. - submission with authentication, e.g. to a third party email sending service. - direct delivery, but with with connections going through a socks proxy. this can be helpful if your ip is blocked, you need to get email out, and you have another IP that isn't blocked. keep in mind that for all of the above, appropriate SPF/DKIM settings have to be configured. the "dnscheck" for a domain does a check for any SOCKS IP in the SPF record. SPF for smtp/submission (ranges? includes?) and any DKIM requirements cannot really be checked. which transport is used can be configured through routes. routes can be set on an account, a domain, or globally. the routes are evaluated in that order, with the first match selecting the transport. these routes are evaluated for each delivery attempt. common selection criteria are recipient domain and sender domain, but also which delivery attempt this is. you could configured mox to attempt sending through a 3rd party from the 4th attempt onwards. routes and transports are optional. if no route matches, or an empty/zero transport is selected, normal direct delivery is done. we could already "submit" emails with 3rd party accounts with "sendmail". but we now support more SASL authentication mechanisms with SMTP (not only PLAIN, but also SCRAM-SHA-256, SCRAM-SHA-1 and CRAM-MD5), which sendmail now also supports. sendmail will use the most secure mechanism supported by the server, or the explicitly configured mechanism. for issue #36 by dmikushin. also based on earlier discussion on hackernews.
2023-06-16 19:38:28 +03:00
launchWork(resolver, map[string]struct{}{})
waitDeliver()
return wasNetDialer
}
// Test direct delivery.
wasNetDialer := testDeliver(fakeSMTPServer)
if !wasNetDialer {
t.Fatalf("expected net.Dialer as dialer")
}
// Add a message to be delivered with submit because of its route.
topath := smtp.Path{Localpart: "mjl", IPDomain: dns.IPDomain{Domain: dns.Domain{ASCII: "submit.example"}}}
_, err = Add(ctxbg, xlog, "mjl", path, topath, false, false, int64(len(testmsg)), "<test@localhost>", nil, prepareFile(t), nil, true)
new feature: when delivering messages from the queue, make it possible to use a "transport" the default transport is still just "direct delivery", where we connect to the destination domain's MX servers. other transports are: - regular smtp without authentication, this is relaying to a smarthost. - submission with authentication, e.g. to a third party email sending service. - direct delivery, but with with connections going through a socks proxy. this can be helpful if your ip is blocked, you need to get email out, and you have another IP that isn't blocked. keep in mind that for all of the above, appropriate SPF/DKIM settings have to be configured. the "dnscheck" for a domain does a check for any SOCKS IP in the SPF record. SPF for smtp/submission (ranges? includes?) and any DKIM requirements cannot really be checked. which transport is used can be configured through routes. routes can be set on an account, a domain, or globally. the routes are evaluated in that order, with the first match selecting the transport. these routes are evaluated for each delivery attempt. common selection criteria are recipient domain and sender domain, but also which delivery attempt this is. you could configured mox to attempt sending through a 3rd party from the 4th attempt onwards. routes and transports are optional. if no route matches, or an empty/zero transport is selected, normal direct delivery is done. we could already "submit" emails with 3rd party accounts with "sendmail". but we now support more SASL authentication mechanisms with SMTP (not only PLAIN, but also SCRAM-SHA-256, SCRAM-SHA-1 and CRAM-MD5), which sendmail now also supports. sendmail will use the most secure mechanism supported by the server, or the explicitly configured mechanism. for issue #36 by dmikushin. also based on earlier discussion on hackernews.
2023-06-16 19:38:28 +03:00
tcheck(t, err, "add message to queue for delivery")
wasNetDialer = testDeliver(fakeSubmitServer)
if !wasNetDialer {
t.Fatalf("expected net.Dialer as dialer")
}
// Add a message to be delivered with submit because of explicitly configured transport, that uses TLS.
msgID, err := Add(ctxbg, xlog, "mjl", path, path, false, false, int64(len(testmsg)), "<test@localhost>", nil, prepareFile(t), nil, true)
new feature: when delivering messages from the queue, make it possible to use a "transport" the default transport is still just "direct delivery", where we connect to the destination domain's MX servers. other transports are: - regular smtp without authentication, this is relaying to a smarthost. - submission with authentication, e.g. to a third party email sending service. - direct delivery, but with with connections going through a socks proxy. this can be helpful if your ip is blocked, you need to get email out, and you have another IP that isn't blocked. keep in mind that for all of the above, appropriate SPF/DKIM settings have to be configured. the "dnscheck" for a domain does a check for any SOCKS IP in the SPF record. SPF for smtp/submission (ranges? includes?) and any DKIM requirements cannot really be checked. which transport is used can be configured through routes. routes can be set on an account, a domain, or globally. the routes are evaluated in that order, with the first match selecting the transport. these routes are evaluated for each delivery attempt. common selection criteria are recipient domain and sender domain, but also which delivery attempt this is. you could configured mox to attempt sending through a 3rd party from the 4th attempt onwards. routes and transports are optional. if no route matches, or an empty/zero transport is selected, normal direct delivery is done. we could already "submit" emails with 3rd party accounts with "sendmail". but we now support more SASL authentication mechanisms with SMTP (not only PLAIN, but also SCRAM-SHA-256, SCRAM-SHA-1 and CRAM-MD5), which sendmail now also supports. sendmail will use the most secure mechanism supported by the server, or the explicitly configured mechanism. for issue #36 by dmikushin. also based on earlier discussion on hackernews.
2023-06-16 19:38:28 +03:00
tcheck(t, err, "add message to queue for delivery")
transportSubmitTLS := "submittls"
n, err = Kick(ctxbg, msgID, "", "", &transportSubmitTLS)
tcheck(t, err, "kick queue")
if n != 1 {
t.Fatalf("kick changed %d messages, expected 1", n)
}
// Make fake cert, and make it trusted.
cert := fakeCert(t, "submission.example", false)
mox.Conf.Static.TLS.CertPool = x509.NewCertPool()
mox.Conf.Static.TLS.CertPool.AddCert(cert.Leaf)
tlsConfig := tls.Config{
Certificates: []tls.Certificate{cert},
}
wasNetDialer = testDeliver(func(conn net.Conn) {
conn = tls.Server(conn, &tlsConfig)
fakeSubmitServer(conn)
})
if !wasNetDialer {
t.Fatalf("expected net.Dialer as dialer")
}
// Add a message to be delivered with socks.
implement dnssec-awareness throughout code, and dane for incoming/outgoing mail delivery the vendored dns resolver code is a copy of the go stdlib dns resolver, with awareness of the "authentic data" (i.e. dnssec secure) added, as well as support for enhanced dns errors, and looking up tlsa records (for dane). ideally it would be upstreamed, but the chances seem slim. dnssec-awareness is added to all packages, e.g. spf, dkim, dmarc, iprev. their dnssec status is added to the Received message headers for incoming email. but the main reason to add dnssec was for implementing dane. with dane, the verification of tls certificates can be done through certificates/public keys published in dns (in the tlsa records). this only makes sense (is trustworthy) if those dns records can be verified to be authentic. mox now applies dane to delivering messages over smtp. mox already implemented mta-sts for webpki/pkix-verification of certificates against the (large) pool of CA's, and still enforces those policies when present. but it now also checks for dane records, and will verify those if present. if dane and mta-sts are both absent, the regular opportunistic tls with starttls is still done. and the fallback to plaintext is also still done. mox also makes it easy to setup dane for incoming deliveries, so other servers can deliver with dane tls certificate verification. the quickstart now generates private keys that are used when requesting certificates with acme. the private keys are pre-generated because they must be static and known during setup, because their public keys must be published in tlsa records in dns. autocert would generate private keys on its own, so had to be forked to add the option to provide the private key when requesting a new certificate. hopefully upstream will accept the change and we can drop the fork. with this change, using the quickstart to setup a new mox instance, the checks at internet.nl result in a 100% score, provided the domain is dnssec-signed and the network doesn't have any issues.
2023-10-10 13:09:35 +03:00
msgID, err = Add(ctxbg, xlog, "mjl", path, path, false, false, int64(len(testmsg)), "<socks@localhost>", nil, prepareFile(t), nil, true)
new feature: when delivering messages from the queue, make it possible to use a "transport" the default transport is still just "direct delivery", where we connect to the destination domain's MX servers. other transports are: - regular smtp without authentication, this is relaying to a smarthost. - submission with authentication, e.g. to a third party email sending service. - direct delivery, but with with connections going through a socks proxy. this can be helpful if your ip is blocked, you need to get email out, and you have another IP that isn't blocked. keep in mind that for all of the above, appropriate SPF/DKIM settings have to be configured. the "dnscheck" for a domain does a check for any SOCKS IP in the SPF record. SPF for smtp/submission (ranges? includes?) and any DKIM requirements cannot really be checked. which transport is used can be configured through routes. routes can be set on an account, a domain, or globally. the routes are evaluated in that order, with the first match selecting the transport. these routes are evaluated for each delivery attempt. common selection criteria are recipient domain and sender domain, but also which delivery attempt this is. you could configured mox to attempt sending through a 3rd party from the 4th attempt onwards. routes and transports are optional. if no route matches, or an empty/zero transport is selected, normal direct delivery is done. we could already "submit" emails with 3rd party accounts with "sendmail". but we now support more SASL authentication mechanisms with SMTP (not only PLAIN, but also SCRAM-SHA-256, SCRAM-SHA-1 and CRAM-MD5), which sendmail now also supports. sendmail will use the most secure mechanism supported by the server, or the explicitly configured mechanism. for issue #36 by dmikushin. also based on earlier discussion on hackernews.
2023-06-16 19:38:28 +03:00
tcheck(t, err, "add message to queue for delivery")
transportSocks := "socks"
n, err = Kick(ctxbg, msgID, "", "", &transportSocks)
tcheck(t, err, "kick queue")
if n != 1 {
t.Fatalf("kick changed %d messages, expected 1", n)
}
wasNetDialer = testDeliver(fakeSMTPServer)
if wasNetDialer {
t.Fatalf("expected non-net.Dialer as dialer") // SOCKS5 dialer is a private type, we cannot check for it.
2023-01-30 16:27:06 +03:00
}
implement dnssec-awareness throughout code, and dane for incoming/outgoing mail delivery the vendored dns resolver code is a copy of the go stdlib dns resolver, with awareness of the "authentic data" (i.e. dnssec secure) added, as well as support for enhanced dns errors, and looking up tlsa records (for dane). ideally it would be upstreamed, but the chances seem slim. dnssec-awareness is added to all packages, e.g. spf, dkim, dmarc, iprev. their dnssec status is added to the Received message headers for incoming email. but the main reason to add dnssec was for implementing dane. with dane, the verification of tls certificates can be done through certificates/public keys published in dns (in the tlsa records). this only makes sense (is trustworthy) if those dns records can be verified to be authentic. mox now applies dane to delivering messages over smtp. mox already implemented mta-sts for webpki/pkix-verification of certificates against the (large) pool of CA's, and still enforces those policies when present. but it now also checks for dane records, and will verify those if present. if dane and mta-sts are both absent, the regular opportunistic tls with starttls is still done. and the fallback to plaintext is also still done. mox also makes it easy to setup dane for incoming deliveries, so other servers can deliver with dane tls certificate verification. the quickstart now generates private keys that are used when requesting certificates with acme. the private keys are pre-generated because they must be static and known during setup, because their public keys must be published in tlsa records in dns. autocert would generate private keys on its own, so had to be forked to add the option to provide the private key when requesting a new certificate. hopefully upstream will accept the change and we can drop the fork. with this change, using the quickstart to setup a new mox instance, the checks at internet.nl result in a 100% score, provided the domain is dnssec-signed and the network doesn't have any issues.
2023-10-10 13:09:35 +03:00
// Add message to be delivered with opportunistic TLS verification.
msgID, err = Add(ctxbg, xlog, "mjl", path, path, false, false, int64(len(testmsg)), "<opportunistictls@localhost>", nil, prepareFile(t), nil, true)
tcheck(t, err, "add message to queue for delivery")
n, err = Kick(ctxbg, msgID, "", "", nil)
tcheck(t, err, "kick queue")
if n != 1 {
t.Fatalf("kick changed %d messages, expected 1", n)
}
testDeliver(fakeSMTPSTARTTLSServer)
// Test fallback to plain text with TLS handshake fails.
msgID, err = Add(ctxbg, xlog, "mjl", path, path, false, false, int64(len(testmsg)), "<badtls@localhost>", nil, prepareFile(t), nil, true)
tcheck(t, err, "add message to queue for delivery")
n, err = Kick(ctxbg, msgID, "", "", nil)
tcheck(t, err, "kick queue")
if n != 1 {
t.Fatalf("kick changed %d messages, expected 1", n)
}
testDeliver(makeBadFakeSMTPSTARTTLSServer())
// Add message to be delivered with DANE verification.
resolver.AllAuthentic = true
resolver.TLSA = map[string][]adns.TLSA{
"_25._tcp.mox.example.": {
{Usage: adns.TLSAUsageDANEEE, Selector: adns.TLSASelectorSPKI, MatchType: adns.TLSAMatchTypeFull, CertAssoc: moxCert.Leaf.RawSubjectPublicKeyInfo},
},
}
msgID, err = Add(ctxbg, xlog, "mjl", path, path, false, false, int64(len(testmsg)), "<dane@localhost>", nil, prepareFile(t), nil, true)
tcheck(t, err, "add message to queue for delivery")
n, err = Kick(ctxbg, msgID, "", "", nil)
tcheck(t, err, "kick queue")
if n != 1 {
t.Fatalf("kick changed %d messages, expected 1", n)
}
testDeliver(fakeSMTPSTARTTLSServer)
// Check that message is delivered with all unusable DANE records.
resolver.TLSA = map[string][]adns.TLSA{
"_25._tcp.mox.example.": {
{},
},
}
msgID, err = Add(ctxbg, xlog, "mjl", path, path, false, false, int64(len(testmsg)), "<daneunusable@localhost>", nil, prepareFile(t), nil, true)
tcheck(t, err, "add message to queue for delivery")
n, err = Kick(ctxbg, msgID, "", "", nil)
tcheck(t, err, "kick queue")
if n != 1 {
t.Fatalf("kick changed %d messages, expected 1", n)
}
testDeliver(fakeSMTPSTARTTLSServer)
// Check that message is delivered with insecure TLSA records. They should be
// ignored and regular STARTTLS tried.
resolver.Inauthentic = []string{"tlsa _25._tcp.mox.example."}
resolver.TLSA = map[string][]adns.TLSA{
"_25._tcp.mox.example.": {
{Usage: adns.TLSAUsageDANEEE, Selector: adns.TLSASelectorSPKI, MatchType: adns.TLSAMatchTypeFull, CertAssoc: make([]byte, sha256.Size)},
},
}
msgID, err = Add(ctxbg, xlog, "mjl", path, path, false, false, int64(len(testmsg)), "<daneinsecure@localhost>", nil, prepareFile(t), nil, true)
tcheck(t, err, "add message to queue for delivery")
n, err = Kick(ctxbg, msgID, "", "", nil)
tcheck(t, err, "kick queue")
if n != 1 {
t.Fatalf("kick changed %d messages, expected 1", n)
}
testDeliver(makeBadFakeSMTPSTARTTLSServer())
resolver.Inauthentic = nil
// Restore pre-DANE behaviour.
resolver.AllAuthentic = false
resolver.TLSA = nil
2023-01-30 16:27:06 +03:00
// Add another message that we'll fail to deliver entirely.
_, err = Add(ctxbg, xlog, "mjl", path, path, false, false, int64(len(testmsg)), "<test@localhost>", nil, prepareFile(t), nil, true)
2023-01-30 16:27:06 +03:00
tcheck(t, err, "add message to queue for delivery")
msgs, err = List(ctxbg)
2023-01-30 16:27:06 +03:00
tcheck(t, err, "list queue")
if len(msgs) != 1 {
t.Fatalf("queue has %d messages, expected 1", len(msgs))
}
msg = msgs[0]
implement dnssec-awareness throughout code, and dane for incoming/outgoing mail delivery the vendored dns resolver code is a copy of the go stdlib dns resolver, with awareness of the "authentic data" (i.e. dnssec secure) added, as well as support for enhanced dns errors, and looking up tlsa records (for dane). ideally it would be upstreamed, but the chances seem slim. dnssec-awareness is added to all packages, e.g. spf, dkim, dmarc, iprev. their dnssec status is added to the Received message headers for incoming email. but the main reason to add dnssec was for implementing dane. with dane, the verification of tls certificates can be done through certificates/public keys published in dns (in the tlsa records). this only makes sense (is trustworthy) if those dns records can be verified to be authentic. mox now applies dane to delivering messages over smtp. mox already implemented mta-sts for webpki/pkix-verification of certificates against the (large) pool of CA's, and still enforces those policies when present. but it now also checks for dane records, and will verify those if present. if dane and mta-sts are both absent, the regular opportunistic tls with starttls is still done. and the fallback to plaintext is also still done. mox also makes it easy to setup dane for incoming deliveries, so other servers can deliver with dane tls certificate verification. the quickstart now generates private keys that are used when requesting certificates with acme. the private keys are pre-generated because they must be static and known during setup, because their public keys must be published in tlsa records in dns. autocert would generate private keys on its own, so had to be forked to add the option to provide the private key when requesting a new certificate. hopefully upstream will accept the change and we can drop the fork. with this change, using the quickstart to setup a new mox instance, the checks at internet.nl result in a 100% score, provided the domain is dnssec-signed and the network doesn't have any issues.
2023-10-10 13:09:35 +03:00
prepServer := func(fn func(c net.Conn)) (net.Conn, func()) {
2023-01-30 16:27:06 +03:00
server, client := net.Pipe()
go func() {
implement dnssec-awareness throughout code, and dane for incoming/outgoing mail delivery the vendored dns resolver code is a copy of the go stdlib dns resolver, with awareness of the "authentic data" (i.e. dnssec secure) added, as well as support for enhanced dns errors, and looking up tlsa records (for dane). ideally it would be upstreamed, but the chances seem slim. dnssec-awareness is added to all packages, e.g. spf, dkim, dmarc, iprev. their dnssec status is added to the Received message headers for incoming email. but the main reason to add dnssec was for implementing dane. with dane, the verification of tls certificates can be done through certificates/public keys published in dns (in the tlsa records). this only makes sense (is trustworthy) if those dns records can be verified to be authentic. mox now applies dane to delivering messages over smtp. mox already implemented mta-sts for webpki/pkix-verification of certificates against the (large) pool of CA's, and still enforces those policies when present. but it now also checks for dane records, and will verify those if present. if dane and mta-sts are both absent, the regular opportunistic tls with starttls is still done. and the fallback to plaintext is also still done. mox also makes it easy to setup dane for incoming deliveries, so other servers can deliver with dane tls certificate verification. the quickstart now generates private keys that are used when requesting certificates with acme. the private keys are pre-generated because they must be static and known during setup, because their public keys must be published in tlsa records in dns. autocert would generate private keys on its own, so had to be forked to add the option to provide the private key when requesting a new certificate. hopefully upstream will accept the change and we can drop the fork. with this change, using the quickstart to setup a new mox instance, the checks at internet.nl result in a 100% score, provided the domain is dnssec-signed and the network doesn't have any issues.
2023-10-10 13:09:35 +03:00
fn(server)
2023-01-30 16:27:06 +03:00
server.Close()
}()
return client, func() {
server.Close()
client.Close()
}
}
implement dnssec-awareness throughout code, and dane for incoming/outgoing mail delivery the vendored dns resolver code is a copy of the go stdlib dns resolver, with awareness of the "authentic data" (i.e. dnssec secure) added, as well as support for enhanced dns errors, and looking up tlsa records (for dane). ideally it would be upstreamed, but the chances seem slim. dnssec-awareness is added to all packages, e.g. spf, dkim, dmarc, iprev. their dnssec status is added to the Received message headers for incoming email. but the main reason to add dnssec was for implementing dane. with dane, the verification of tls certificates can be done through certificates/public keys published in dns (in the tlsa records). this only makes sense (is trustworthy) if those dns records can be verified to be authentic. mox now applies dane to delivering messages over smtp. mox already implemented mta-sts for webpki/pkix-verification of certificates against the (large) pool of CA's, and still enforces those policies when present. but it now also checks for dane records, and will verify those if present. if dane and mta-sts are both absent, the regular opportunistic tls with starttls is still done. and the fallback to plaintext is also still done. mox also makes it easy to setup dane for incoming deliveries, so other servers can deliver with dane tls certificate verification. the quickstart now generates private keys that are used when requesting certificates with acme. the private keys are pre-generated because they must be static and known during setup, because their public keys must be published in tlsa records in dns. autocert would generate private keys on its own, so had to be forked to add the option to provide the private key when requesting a new certificate. hopefully upstream will accept the change and we can drop the fork. with this change, using the quickstart to setup a new mox instance, the checks at internet.nl result in a 100% score, provided the domain is dnssec-signed and the network doesn't have any issues.
2023-10-10 13:09:35 +03:00
conn2, cleanup2 := prepServer(func(conn net.Conn) { fmt.Fprintf(conn, "220 mox.example\r\n") })
conn3, cleanup3 := prepServer(func(conn net.Conn) { fmt.Fprintf(conn, "451 mox.example\r\n") })
conn4, cleanup4 := prepServer(fakeSMTPSTARTTLSServer)
2023-01-30 16:27:06 +03:00
defer func() {
cleanup2()
cleanup3()
implement dnssec-awareness throughout code, and dane for incoming/outgoing mail delivery the vendored dns resolver code is a copy of the go stdlib dns resolver, with awareness of the "authentic data" (i.e. dnssec secure) added, as well as support for enhanced dns errors, and looking up tlsa records (for dane). ideally it would be upstreamed, but the chances seem slim. dnssec-awareness is added to all packages, e.g. spf, dkim, dmarc, iprev. their dnssec status is added to the Received message headers for incoming email. but the main reason to add dnssec was for implementing dane. with dane, the verification of tls certificates can be done through certificates/public keys published in dns (in the tlsa records). this only makes sense (is trustworthy) if those dns records can be verified to be authentic. mox now applies dane to delivering messages over smtp. mox already implemented mta-sts for webpki/pkix-verification of certificates against the (large) pool of CA's, and still enforces those policies when present. but it now also checks for dane records, and will verify those if present. if dane and mta-sts are both absent, the regular opportunistic tls with starttls is still done. and the fallback to plaintext is also still done. mox also makes it easy to setup dane for incoming deliveries, so other servers can deliver with dane tls certificate verification. the quickstart now generates private keys that are used when requesting certificates with acme. the private keys are pre-generated because they must be static and known during setup, because their public keys must be published in tlsa records in dns. autocert would generate private keys on its own, so had to be forked to add the option to provide the private key when requesting a new certificate. hopefully upstream will accept the change and we can drop the fork. with this change, using the quickstart to setup a new mox instance, the checks at internet.nl result in a 100% score, provided the domain is dnssec-signed and the network doesn't have any issues.
2023-10-10 13:09:35 +03:00
cleanup4()
2023-01-30 16:27:06 +03:00
}()
seq := 0
implement dnssec-awareness throughout code, and dane for incoming/outgoing mail delivery the vendored dns resolver code is a copy of the go stdlib dns resolver, with awareness of the "authentic data" (i.e. dnssec secure) added, as well as support for enhanced dns errors, and looking up tlsa records (for dane). ideally it would be upstreamed, but the chances seem slim. dnssec-awareness is added to all packages, e.g. spf, dkim, dmarc, iprev. their dnssec status is added to the Received message headers for incoming email. but the main reason to add dnssec was for implementing dane. with dane, the verification of tls certificates can be done through certificates/public keys published in dns (in the tlsa records). this only makes sense (is trustworthy) if those dns records can be verified to be authentic. mox now applies dane to delivering messages over smtp. mox already implemented mta-sts for webpki/pkix-verification of certificates against the (large) pool of CA's, and still enforces those policies when present. but it now also checks for dane records, and will verify those if present. if dane and mta-sts are both absent, the regular opportunistic tls with starttls is still done. and the fallback to plaintext is also still done. mox also makes it easy to setup dane for incoming deliveries, so other servers can deliver with dane tls certificate verification. the quickstart now generates private keys that are used when requesting certificates with acme. the private keys are pre-generated because they must be static and known during setup, because their public keys must be published in tlsa records in dns. autocert would generate private keys on its own, so had to be forked to add the option to provide the private key when requesting a new certificate. hopefully upstream will accept the change and we can drop the fork. with this change, using the quickstart to setup a new mox instance, the checks at internet.nl result in a 100% score, provided the domain is dnssec-signed and the network doesn't have any issues.
2023-10-10 13:09:35 +03:00
smtpclient.DialHook = func(ctx context.Context, dialer smtpclient.Dialer, timeout time.Duration, addr string, laddr net.Addr) (net.Conn, error) {
2023-01-30 16:27:06 +03:00
seq++
switch seq {
default:
return nil, fmt.Errorf("connect error from test")
case 2:
return conn2, nil
case 3:
return conn3, nil
implement dnssec-awareness throughout code, and dane for incoming/outgoing mail delivery the vendored dns resolver code is a copy of the go stdlib dns resolver, with awareness of the "authentic data" (i.e. dnssec secure) added, as well as support for enhanced dns errors, and looking up tlsa records (for dane). ideally it would be upstreamed, but the chances seem slim. dnssec-awareness is added to all packages, e.g. spf, dkim, dmarc, iprev. their dnssec status is added to the Received message headers for incoming email. but the main reason to add dnssec was for implementing dane. with dane, the verification of tls certificates can be done through certificates/public keys published in dns (in the tlsa records). this only makes sense (is trustworthy) if those dns records can be verified to be authentic. mox now applies dane to delivering messages over smtp. mox already implemented mta-sts for webpki/pkix-verification of certificates against the (large) pool of CA's, and still enforces those policies when present. but it now also checks for dane records, and will verify those if present. if dane and mta-sts are both absent, the regular opportunistic tls with starttls is still done. and the fallback to plaintext is also still done. mox also makes it easy to setup dane for incoming deliveries, so other servers can deliver with dane tls certificate verification. the quickstart now generates private keys that are used when requesting certificates with acme. the private keys are pre-generated because they must be static and known during setup, because their public keys must be published in tlsa records in dns. autocert would generate private keys on its own, so had to be forked to add the option to provide the private key when requesting a new certificate. hopefully upstream will accept the change and we can drop the fork. with this change, using the quickstart to setup a new mox instance, the checks at internet.nl result in a 100% score, provided the domain is dnssec-signed and the network doesn't have any issues.
2023-10-10 13:09:35 +03:00
case 4:
return conn4, nil
2023-01-30 16:27:06 +03:00
}
}
implement dnssec-awareness throughout code, and dane for incoming/outgoing mail delivery the vendored dns resolver code is a copy of the go stdlib dns resolver, with awareness of the "authentic data" (i.e. dnssec secure) added, as well as support for enhanced dns errors, and looking up tlsa records (for dane). ideally it would be upstreamed, but the chances seem slim. dnssec-awareness is added to all packages, e.g. spf, dkim, dmarc, iprev. their dnssec status is added to the Received message headers for incoming email. but the main reason to add dnssec was for implementing dane. with dane, the verification of tls certificates can be done through certificates/public keys published in dns (in the tlsa records). this only makes sense (is trustworthy) if those dns records can be verified to be authentic. mox now applies dane to delivering messages over smtp. mox already implemented mta-sts for webpki/pkix-verification of certificates against the (large) pool of CA's, and still enforces those policies when present. but it now also checks for dane records, and will verify those if present. if dane and mta-sts are both absent, the regular opportunistic tls with starttls is still done. and the fallback to plaintext is also still done. mox also makes it easy to setup dane for incoming deliveries, so other servers can deliver with dane tls certificate verification. the quickstart now generates private keys that are used when requesting certificates with acme. the private keys are pre-generated because they must be static and known during setup, because their public keys must be published in tlsa records in dns. autocert would generate private keys on its own, so had to be forked to add the option to provide the private key when requesting a new certificate. hopefully upstream will accept the change and we can drop the fork. with this change, using the quickstart to setup a new mox instance, the checks at internet.nl result in a 100% score, provided the domain is dnssec-signed and the network doesn't have any issues.
2023-10-10 13:09:35 +03:00
defer func() {
smtpclient.DialHook = nil
}()
2023-01-30 16:27:06 +03:00
comm := store.RegisterComm(acc)
defer comm.Unregister()
for i := 1; i < 8; i++ {
go func() { <-deliveryResult }() // Deliver sends here.
implement dnssec-awareness throughout code, and dane for incoming/outgoing mail delivery the vendored dns resolver code is a copy of the go stdlib dns resolver, with awareness of the "authentic data" (i.e. dnssec secure) added, as well as support for enhanced dns errors, and looking up tlsa records (for dane). ideally it would be upstreamed, but the chances seem slim. dnssec-awareness is added to all packages, e.g. spf, dkim, dmarc, iprev. their dnssec status is added to the Received message headers for incoming email. but the main reason to add dnssec was for implementing dane. with dane, the verification of tls certificates can be done through certificates/public keys published in dns (in the tlsa records). this only makes sense (is trustworthy) if those dns records can be verified to be authentic. mox now applies dane to delivering messages over smtp. mox already implemented mta-sts for webpki/pkix-verification of certificates against the (large) pool of CA's, and still enforces those policies when present. but it now also checks for dane records, and will verify those if present. if dane and mta-sts are both absent, the regular opportunistic tls with starttls is still done. and the fallback to plaintext is also still done. mox also makes it easy to setup dane for incoming deliveries, so other servers can deliver with dane tls certificate verification. the quickstart now generates private keys that are used when requesting certificates with acme. the private keys are pre-generated because they must be static and known during setup, because their public keys must be published in tlsa records in dns. autocert would generate private keys on its own, so had to be forked to add the option to provide the private key when requesting a new certificate. hopefully upstream will accept the change and we can drop the fork. with this change, using the quickstart to setup a new mox instance, the checks at internet.nl result in a 100% score, provided the domain is dnssec-signed and the network doesn't have any issues.
2023-10-10 13:09:35 +03:00
if i == 4 {
resolver.AllAuthentic = true
resolver.TLSA = map[string][]adns.TLSA{
"_25._tcp.mox.example.": {
// Non-matching zero CertAssoc, should cause failure.
{Usage: adns.TLSAUsageDANEEE, Selector: adns.TLSASelectorSPKI, MatchType: adns.TLSAMatchTypeSHA256, CertAssoc: make([]byte, sha256.Size)},
},
}
} else {
resolver.AllAuthentic = false
resolver.TLSA = nil
}
2023-01-30 16:27:06 +03:00
deliver(resolver, msg)
err = DB.Get(ctxbg, &msg)
2023-01-30 16:27:06 +03:00
tcheck(t, err, "get msg")
if msg.Attempts != i {
t.Fatalf("got attempt %d, expected %d", msg.Attempts, i)
}
if msg.Attempts == 5 {
timer.Reset(time.Second)
changes := make(chan struct{}, 1)
go func() {
comm.Get()
changes <- struct{}{}
}()
select {
case <-changes:
case <-timer.C:
t.Fatalf("no dsn in 1s")
}
}
}
// Trigger final failure.
go func() { <-deliveryResult }() // Deliver sends here.
deliver(resolver, msg)
err = DB.Get(ctxbg, &msg)
2023-01-30 16:27:06 +03:00
if err != bstore.ErrAbsent {
t.Fatalf("attempt to fetch delivered and removed message from queue, got err %v, expected ErrAbsent", err)
}
timer.Reset(time.Second)
changes := make(chan struct{}, 1)
go func() {
comm.Get()
changes <- struct{}{}
}()
select {
case <-changes:
case <-timer.C:
t.Fatalf("no dsn in 1s")
}
}
// test Start and that it attempts to deliver.
func TestQueueStart(t *testing.T) {
// Override dial function. We'll make connecting fail and check the attempt.
resolver := dns.MockResolver{
A: map[string][]string{"mox.example.": {"127.0.0.1"}},
MX: map[string][]*net.MX{"mox.example.": {{Host: "mox.example", Pref: 10}}},
}
dialed := make(chan struct{}, 1)
implement dnssec-awareness throughout code, and dane for incoming/outgoing mail delivery the vendored dns resolver code is a copy of the go stdlib dns resolver, with awareness of the "authentic data" (i.e. dnssec secure) added, as well as support for enhanced dns errors, and looking up tlsa records (for dane). ideally it would be upstreamed, but the chances seem slim. dnssec-awareness is added to all packages, e.g. spf, dkim, dmarc, iprev. their dnssec status is added to the Received message headers for incoming email. but the main reason to add dnssec was for implementing dane. with dane, the verification of tls certificates can be done through certificates/public keys published in dns (in the tlsa records). this only makes sense (is trustworthy) if those dns records can be verified to be authentic. mox now applies dane to delivering messages over smtp. mox already implemented mta-sts for webpki/pkix-verification of certificates against the (large) pool of CA's, and still enforces those policies when present. but it now also checks for dane records, and will verify those if present. if dane and mta-sts are both absent, the regular opportunistic tls with starttls is still done. and the fallback to plaintext is also still done. mox also makes it easy to setup dane for incoming deliveries, so other servers can deliver with dane tls certificate verification. the quickstart now generates private keys that are used when requesting certificates with acme. the private keys are pre-generated because they must be static and known during setup, because their public keys must be published in tlsa records in dns. autocert would generate private keys on its own, so had to be forked to add the option to provide the private key when requesting a new certificate. hopefully upstream will accept the change and we can drop the fork. with this change, using the quickstart to setup a new mox instance, the checks at internet.nl result in a 100% score, provided the domain is dnssec-signed and the network doesn't have any issues.
2023-10-10 13:09:35 +03:00
smtpclient.DialHook = func(ctx context.Context, dialer smtpclient.Dialer, timeout time.Duration, addr string, laddr net.Addr) (net.Conn, error) {
2023-01-30 16:27:06 +03:00
dialed <- struct{}{}
return nil, fmt.Errorf("failure from test")
}
implement dnssec-awareness throughout code, and dane for incoming/outgoing mail delivery the vendored dns resolver code is a copy of the go stdlib dns resolver, with awareness of the "authentic data" (i.e. dnssec secure) added, as well as support for enhanced dns errors, and looking up tlsa records (for dane). ideally it would be upstreamed, but the chances seem slim. dnssec-awareness is added to all packages, e.g. spf, dkim, dmarc, iprev. their dnssec status is added to the Received message headers for incoming email. but the main reason to add dnssec was for implementing dane. with dane, the verification of tls certificates can be done through certificates/public keys published in dns (in the tlsa records). this only makes sense (is trustworthy) if those dns records can be verified to be authentic. mox now applies dane to delivering messages over smtp. mox already implemented mta-sts for webpki/pkix-verification of certificates against the (large) pool of CA's, and still enforces those policies when present. but it now also checks for dane records, and will verify those if present. if dane and mta-sts are both absent, the regular opportunistic tls with starttls is still done. and the fallback to plaintext is also still done. mox also makes it easy to setup dane for incoming deliveries, so other servers can deliver with dane tls certificate verification. the quickstart now generates private keys that are used when requesting certificates with acme. the private keys are pre-generated because they must be static and known during setup, because their public keys must be published in tlsa records in dns. autocert would generate private keys on its own, so had to be forked to add the option to provide the private key when requesting a new certificate. hopefully upstream will accept the change and we can drop the fork. with this change, using the quickstart to setup a new mox instance, the checks at internet.nl result in a 100% score, provided the domain is dnssec-signed and the network doesn't have any issues.
2023-10-10 13:09:35 +03:00
defer func() {
smtpclient.DialHook = nil
}()
2023-01-30 16:27:06 +03:00
_, cleanup := setup(t)
defer cleanup()
done := make(chan struct{}, 1)
defer func() {
mox.ShutdownCancel()
2023-01-30 16:27:06 +03:00
<-done
mox.Shutdown, mox.ShutdownCancel = context.WithCancel(ctxbg)
2023-01-30 16:27:06 +03:00
}()
err := Start(resolver, done)
tcheck(t, err, "queue start")
checkDialed := func(need bool) {
t.Helper()
d := time.Second / 10
if need {
d = time.Second
}
timer := time.NewTimer(d)
defer timer.Stop()
select {
case <-dialed:
if !need {
t.Fatalf("unexpected dial attempt")
}
case <-timer.C:
if need {
t.Fatalf("expected to see a dial attempt")
}
}
}
path := smtp.Path{Localpart: "mjl", IPDomain: dns.IPDomain{Domain: dns.Domain{ASCII: "mox.example"}}}
_, err = Add(ctxbg, xlog, "mjl", path, path, false, false, int64(len(testmsg)), "<test@localhost>", nil, prepareFile(t), nil, true)
2023-01-30 16:27:06 +03:00
tcheck(t, err, "add message to queue for delivery")
checkDialed(true)
// Don't change message nextattempt time, but kick queue. Message should not be delivered.
queuekick()
checkDialed(false)
// Kick for real, should see another attempt.
new feature: when delivering messages from the queue, make it possible to use a "transport" the default transport is still just "direct delivery", where we connect to the destination domain's MX servers. other transports are: - regular smtp without authentication, this is relaying to a smarthost. - submission with authentication, e.g. to a third party email sending service. - direct delivery, but with with connections going through a socks proxy. this can be helpful if your ip is blocked, you need to get email out, and you have another IP that isn't blocked. keep in mind that for all of the above, appropriate SPF/DKIM settings have to be configured. the "dnscheck" for a domain does a check for any SOCKS IP in the SPF record. SPF for smtp/submission (ranges? includes?) and any DKIM requirements cannot really be checked. which transport is used can be configured through routes. routes can be set on an account, a domain, or globally. the routes are evaluated in that order, with the first match selecting the transport. these routes are evaluated for each delivery attempt. common selection criteria are recipient domain and sender domain, but also which delivery attempt this is. you could configured mox to attempt sending through a 3rd party from the 4th attempt onwards. routes and transports are optional. if no route matches, or an empty/zero transport is selected, normal direct delivery is done. we could already "submit" emails with 3rd party accounts with "sendmail". but we now support more SASL authentication mechanisms with SMTP (not only PLAIN, but also SCRAM-SHA-256, SCRAM-SHA-1 and CRAM-MD5), which sendmail now also supports. sendmail will use the most secure mechanism supported by the server, or the explicitly configured mechanism. for issue #36 by dmikushin. also based on earlier discussion on hackernews.
2023-06-16 19:38:28 +03:00
n, err := Kick(ctxbg, 0, "mox.example", "", nil)
2023-01-30 16:27:06 +03:00
tcheck(t, err, "kick queue")
if n != 1 {
t.Fatalf("kick changed %d messages, expected 1", n)
}
checkDialed(true)
time.Sleep(100 * time.Millisecond) // Racy... we won't get notified when work is done...
}
new feature: when delivering messages from the queue, make it possible to use a "transport" the default transport is still just "direct delivery", where we connect to the destination domain's MX servers. other transports are: - regular smtp without authentication, this is relaying to a smarthost. - submission with authentication, e.g. to a third party email sending service. - direct delivery, but with with connections going through a socks proxy. this can be helpful if your ip is blocked, you need to get email out, and you have another IP that isn't blocked. keep in mind that for all of the above, appropriate SPF/DKIM settings have to be configured. the "dnscheck" for a domain does a check for any SOCKS IP in the SPF record. SPF for smtp/submission (ranges? includes?) and any DKIM requirements cannot really be checked. which transport is used can be configured through routes. routes can be set on an account, a domain, or globally. the routes are evaluated in that order, with the first match selecting the transport. these routes are evaluated for each delivery attempt. common selection criteria are recipient domain and sender domain, but also which delivery attempt this is. you could configured mox to attempt sending through a 3rd party from the 4th attempt onwards. routes and transports are optional. if no route matches, or an empty/zero transport is selected, normal direct delivery is done. we could already "submit" emails with 3rd party accounts with "sendmail". but we now support more SASL authentication mechanisms with SMTP (not only PLAIN, but also SCRAM-SHA-256, SCRAM-SHA-1 and CRAM-MD5), which sendmail now also supports. sendmail will use the most secure mechanism supported by the server, or the explicitly configured mechanism. for issue #36 by dmikushin. also based on earlier discussion on hackernews.
2023-06-16 19:38:28 +03:00
// Just a cert that appears valid.
func fakeCert(t *testing.T, name string, expired bool) tls.Certificate {
notAfter := time.Now()
if expired {
notAfter = notAfter.Add(-time.Hour)
} else {
notAfter = notAfter.Add(time.Hour)
}
privKey := ed25519.NewKeyFromSeed(make([]byte, ed25519.SeedSize)) // Fake key, don't use this for real!
template := &x509.Certificate{
SerialNumber: big.NewInt(1), // Required field...
DNSNames: []string{name},
NotBefore: time.Now().Add(-time.Hour),
NotAfter: notAfter,
}
localCertBuf, err := x509.CreateCertificate(cryptorand.Reader, template, template, privKey.Public(), privKey)
if err != nil {
t.Fatalf("making certificate: %s", err)
}
cert, err := x509.ParseCertificate(localCertBuf)
if err != nil {
t.Fatalf("parsing generated certificate: %s", err)
}
c := tls.Certificate{
Certificate: [][]byte{localCertBuf},
PrivateKey: privKey,
Leaf: cert,
}
return c
}