mox/queue/submit.go

250 lines
8.3 KiB
Go
Raw Normal View History

new feature: when delivering messages from the queue, make it possible to use a "transport" the default transport is still just "direct delivery", where we connect to the destination domain's MX servers. other transports are: - regular smtp without authentication, this is relaying to a smarthost. - submission with authentication, e.g. to a third party email sending service. - direct delivery, but with with connections going through a socks proxy. this can be helpful if your ip is blocked, you need to get email out, and you have another IP that isn't blocked. keep in mind that for all of the above, appropriate SPF/DKIM settings have to be configured. the "dnscheck" for a domain does a check for any SOCKS IP in the SPF record. SPF for smtp/submission (ranges? includes?) and any DKIM requirements cannot really be checked. which transport is used can be configured through routes. routes can be set on an account, a domain, or globally. the routes are evaluated in that order, with the first match selecting the transport. these routes are evaluated for each delivery attempt. common selection criteria are recipient domain and sender domain, but also which delivery attempt this is. you could configured mox to attempt sending through a 3rd party from the 4th attempt onwards. routes and transports are optional. if no route matches, or an empty/zero transport is selected, normal direct delivery is done. we could already "submit" emails with 3rd party accounts with "sendmail". but we now support more SASL authentication mechanisms with SMTP (not only PLAIN, but also SCRAM-SHA-256, SCRAM-SHA-1 and CRAM-MD5), which sendmail now also supports. sendmail will use the most secure mechanism supported by the server, or the explicitly configured mechanism. for issue #36 by dmikushin. also based on earlier discussion on hackernews.
2023-06-16 19:38:28 +03:00
package queue
import (
"bytes"
"context"
"crypto/tls"
new feature: when delivering messages from the queue, make it possible to use a "transport" the default transport is still just "direct delivery", where we connect to the destination domain's MX servers. other transports are: - regular smtp without authentication, this is relaying to a smarthost. - submission with authentication, e.g. to a third party email sending service. - direct delivery, but with with connections going through a socks proxy. this can be helpful if your ip is blocked, you need to get email out, and you have another IP that isn't blocked. keep in mind that for all of the above, appropriate SPF/DKIM settings have to be configured. the "dnscheck" for a domain does a check for any SOCKS IP in the SPF record. SPF for smtp/submission (ranges? includes?) and any DKIM requirements cannot really be checked. which transport is used can be configured through routes. routes can be set on an account, a domain, or globally. the routes are evaluated in that order, with the first match selecting the transport. these routes are evaluated for each delivery attempt. common selection criteria are recipient domain and sender domain, but also which delivery attempt this is. you could configured mox to attempt sending through a 3rd party from the 4th attempt onwards. routes and transports are optional. if no route matches, or an empty/zero transport is selected, normal direct delivery is done. we could already "submit" emails with 3rd party accounts with "sendmail". but we now support more SASL authentication mechanisms with SMTP (not only PLAIN, but also SCRAM-SHA-256, SCRAM-SHA-1 and CRAM-MD5), which sendmail now also supports. sendmail will use the most secure mechanism supported by the server, or the explicitly configured mechanism. for issue #36 by dmikushin. also based on earlier discussion on hackernews.
2023-06-16 19:38:28 +03:00
"errors"
"fmt"
"io"
"log/slog"
new feature: when delivering messages from the queue, make it possible to use a "transport" the default transport is still just "direct delivery", where we connect to the destination domain's MX servers. other transports are: - regular smtp without authentication, this is relaying to a smarthost. - submission with authentication, e.g. to a third party email sending service. - direct delivery, but with with connections going through a socks proxy. this can be helpful if your ip is blocked, you need to get email out, and you have another IP that isn't blocked. keep in mind that for all of the above, appropriate SPF/DKIM settings have to be configured. the "dnscheck" for a domain does a check for any SOCKS IP in the SPF record. SPF for smtp/submission (ranges? includes?) and any DKIM requirements cannot really be checked. which transport is used can be configured through routes. routes can be set on an account, a domain, or globally. the routes are evaluated in that order, with the first match selecting the transport. these routes are evaluated for each delivery attempt. common selection criteria are recipient domain and sender domain, but also which delivery attempt this is. you could configured mox to attempt sending through a 3rd party from the 4th attempt onwards. routes and transports are optional. if no route matches, or an empty/zero transport is selected, normal direct delivery is done. we could already "submit" emails with 3rd party accounts with "sendmail". but we now support more SASL authentication mechanisms with SMTP (not only PLAIN, but also SCRAM-SHA-256, SCRAM-SHA-1 and CRAM-MD5), which sendmail now also supports. sendmail will use the most secure mechanism supported by the server, or the explicitly configured mechanism. for issue #36 by dmikushin. also based on earlier discussion on hackernews.
2023-06-16 19:38:28 +03:00
"net"
"os"
"slices"
new feature: when delivering messages from the queue, make it possible to use a "transport" the default transport is still just "direct delivery", where we connect to the destination domain's MX servers. other transports are: - regular smtp without authentication, this is relaying to a smarthost. - submission with authentication, e.g. to a third party email sending service. - direct delivery, but with with connections going through a socks proxy. this can be helpful if your ip is blocked, you need to get email out, and you have another IP that isn't blocked. keep in mind that for all of the above, appropriate SPF/DKIM settings have to be configured. the "dnscheck" for a domain does a check for any SOCKS IP in the SPF record. SPF for smtp/submission (ranges? includes?) and any DKIM requirements cannot really be checked. which transport is used can be configured through routes. routes can be set on an account, a domain, or globally. the routes are evaluated in that order, with the first match selecting the transport. these routes are evaluated for each delivery attempt. common selection criteria are recipient domain and sender domain, but also which delivery attempt this is. you could configured mox to attempt sending through a 3rd party from the 4th attempt onwards. routes and transports are optional. if no route matches, or an empty/zero transport is selected, normal direct delivery is done. we could already "submit" emails with 3rd party accounts with "sendmail". but we now support more SASL authentication mechanisms with SMTP (not only PLAIN, but also SCRAM-SHA-256, SCRAM-SHA-1 and CRAM-MD5), which sendmail now also supports. sendmail will use the most secure mechanism supported by the server, or the explicitly configured mechanism. for issue #36 by dmikushin. also based on earlier discussion on hackernews.
2023-06-16 19:38:28 +03:00
"time"
"github.com/mjl-/mox/config"
"github.com/mjl-/mox/dns"
"github.com/mjl-/mox/dsn"
"github.com/mjl-/mox/mlog"
"github.com/mjl-/mox/mox-"
"github.com/mjl-/mox/sasl"
implement "requiretls", rfc 8689 with requiretls, the tls verification mode/rules for email deliveries can be changed by the sender/submitter. in two ways: 1. "requiretls" smtp extension to always enforce verified tls (with mta-sts or dnssec+dane), along the entire delivery path until delivery into the final destination mailbox (so entire transport is verified-tls-protected). 2. "tls-required: no" message header, to ignore any tls and tls verification errors even if the recipient domain has a policy that requires tls verification (mta-sts and/or dnssec+dane), allowing delivery of non-sensitive messages in case of misconfiguration/interoperability issues (at least useful for sending tls reports). we enable requiretls by default (only when tls is active), for smtp and submission. it can be disabled through the config. for each delivery attempt, we now store (per recipient domain, in the account of the sender) whether the smtp server supports starttls and requiretls. this support is shown (after having sent a first message) in the webmail when sending a message (the previous 3 bars under the address input field are now 5 bars, the first for starttls support, the last for requiretls support). when all recipient domains for a message are known to implement requiretls, requiretls is automatically selected for sending (instead of "default" tls behaviour). users can also select the "fallback to insecure" to add the "tls-required: no" header. new metrics are added for insight into requiretls errors and (some, not yet all) cases where tls-required-no ignored a tls/verification error. the admin can change the requiretls status for messages in the queue. so with default delivery attempts, when verified tls is required by failing, an admin could potentially change the field to "tls-required: no"-behaviour. messages received (over smtp) with the requiretls option, get a comment added to their Received header line, just before "id", after "with".
2023-10-24 11:06:16 +03:00
"github.com/mjl-/mox/smtp"
new feature: when delivering messages from the queue, make it possible to use a "transport" the default transport is still just "direct delivery", where we connect to the destination domain's MX servers. other transports are: - regular smtp without authentication, this is relaying to a smarthost. - submission with authentication, e.g. to a third party email sending service. - direct delivery, but with with connections going through a socks proxy. this can be helpful if your ip is blocked, you need to get email out, and you have another IP that isn't blocked. keep in mind that for all of the above, appropriate SPF/DKIM settings have to be configured. the "dnscheck" for a domain does a check for any SOCKS IP in the SPF record. SPF for smtp/submission (ranges? includes?) and any DKIM requirements cannot really be checked. which transport is used can be configured through routes. routes can be set on an account, a domain, or globally. the routes are evaluated in that order, with the first match selecting the transport. these routes are evaluated for each delivery attempt. common selection criteria are recipient domain and sender domain, but also which delivery attempt this is. you could configured mox to attempt sending through a 3rd party from the 4th attempt onwards. routes and transports are optional. if no route matches, or an empty/zero transport is selected, normal direct delivery is done. we could already "submit" emails with 3rd party accounts with "sendmail". but we now support more SASL authentication mechanisms with SMTP (not only PLAIN, but also SCRAM-SHA-256, SCRAM-SHA-1 and CRAM-MD5), which sendmail now also supports. sendmail will use the most secure mechanism supported by the server, or the explicitly configured mechanism. for issue #36 by dmikushin. also based on earlier discussion on hackernews.
2023-06-16 19:38:28 +03:00
"github.com/mjl-/mox/smtpclient"
"github.com/mjl-/mox/store"
)
// todo: reuse connection? do fewer concurrently (other than with direct delivery).
// deliver via another SMTP server, e.g. relaying to a smart host, possibly
// with authentication (submission).
func deliverSubmit(qlog mlog.Log, resolver dns.Resolver, dialer smtpclient.Dialer, m Msg, backoff time.Duration, transportName string, transport *config.TransportSMTP, dialTLS bool, defaultPort int) {
new feature: when delivering messages from the queue, make it possible to use a "transport" the default transport is still just "direct delivery", where we connect to the destination domain's MX servers. other transports are: - regular smtp without authentication, this is relaying to a smarthost. - submission with authentication, e.g. to a third party email sending service. - direct delivery, but with with connections going through a socks proxy. this can be helpful if your ip is blocked, you need to get email out, and you have another IP that isn't blocked. keep in mind that for all of the above, appropriate SPF/DKIM settings have to be configured. the "dnscheck" for a domain does a check for any SOCKS IP in the SPF record. SPF for smtp/submission (ranges? includes?) and any DKIM requirements cannot really be checked. which transport is used can be configured through routes. routes can be set on an account, a domain, or globally. the routes are evaluated in that order, with the first match selecting the transport. these routes are evaluated for each delivery attempt. common selection criteria are recipient domain and sender domain, but also which delivery attempt this is. you could configured mox to attempt sending through a 3rd party from the 4th attempt onwards. routes and transports are optional. if no route matches, or an empty/zero transport is selected, normal direct delivery is done. we could already "submit" emails with 3rd party accounts with "sendmail". but we now support more SASL authentication mechanisms with SMTP (not only PLAIN, but also SCRAM-SHA-256, SCRAM-SHA-1 and CRAM-MD5), which sendmail now also supports. sendmail will use the most secure mechanism supported by the server, or the explicitly configured mechanism. for issue #36 by dmikushin. also based on earlier discussion on hackernews.
2023-06-16 19:38:28 +03:00
// todo: configurable timeouts
port := transport.Port
if port == 0 {
port = defaultPort
}
implement outgoing tls reports we were already accepting, processing and displaying incoming tls reports. now we start tracking TLS connection and security-policy-related errors for outgoing message deliveries as well. we send reports once a day, to the reporting addresses specified in TLSRPT records (rua) of a policy domain. these reports are about MTA-STS policies and/or DANE policies, and about STARTTLS-related failures. sending reports is enabled by default, but can be disabled through setting NoOutgoingTLSReports in mox.conf. only at the end of the implementation process came the realization that the TLSRPT policy domain for DANE (MX) hosts are separate from the TLSRPT policy for the recipient domain, and that MTA-STS and DANE TLS/policy results are typically delivered in separate reports. so MX hosts need their own TLSRPT policies. config for the per-host TLSRPT policy should be added to mox.conf for existing installs, in field HostTLSRPT. it is automatically configured by quickstart for new installs. with a HostTLSRPT config, the "dns records" and "dns check" admin pages now suggest the per-host TLSRPT record. by creating that record, you're requesting TLS reports about your MX host. gathering all the TLS/policy results is somewhat tricky. the tentacles go throughout the code. the positive result is that the TLS/policy-related code had to be cleaned up a bit. for example, the smtpclient TLS modes now reflect reality better, with independent settings about whether PKIX and/or DANE verification has to be done, and/or whether verification errors have to be ignored (e.g. for tls-required: no header). also, cached mtasts policies of mode "none" are now cleaned up once the MTA-STS DNS record goes away.
2023-11-09 19:40:46 +03:00
tlsMode := smtpclient.TLSRequiredStartTLS
tlsPKIX := true
new feature: when delivering messages from the queue, make it possible to use a "transport" the default transport is still just "direct delivery", where we connect to the destination domain's MX servers. other transports are: - regular smtp without authentication, this is relaying to a smarthost. - submission with authentication, e.g. to a third party email sending service. - direct delivery, but with with connections going through a socks proxy. this can be helpful if your ip is blocked, you need to get email out, and you have another IP that isn't blocked. keep in mind that for all of the above, appropriate SPF/DKIM settings have to be configured. the "dnscheck" for a domain does a check for any SOCKS IP in the SPF record. SPF for smtp/submission (ranges? includes?) and any DKIM requirements cannot really be checked. which transport is used can be configured through routes. routes can be set on an account, a domain, or globally. the routes are evaluated in that order, with the first match selecting the transport. these routes are evaluated for each delivery attempt. common selection criteria are recipient domain and sender domain, but also which delivery attempt this is. you could configured mox to attempt sending through a 3rd party from the 4th attempt onwards. routes and transports are optional. if no route matches, or an empty/zero transport is selected, normal direct delivery is done. we could already "submit" emails with 3rd party accounts with "sendmail". but we now support more SASL authentication mechanisms with SMTP (not only PLAIN, but also SCRAM-SHA-256, SCRAM-SHA-1 and CRAM-MD5), which sendmail now also supports. sendmail will use the most secure mechanism supported by the server, or the explicitly configured mechanism. for issue #36 by dmikushin. also based on earlier discussion on hackernews.
2023-06-16 19:38:28 +03:00
if dialTLS {
implement outgoing tls reports we were already accepting, processing and displaying incoming tls reports. now we start tracking TLS connection and security-policy-related errors for outgoing message deliveries as well. we send reports once a day, to the reporting addresses specified in TLSRPT records (rua) of a policy domain. these reports are about MTA-STS policies and/or DANE policies, and about STARTTLS-related failures. sending reports is enabled by default, but can be disabled through setting NoOutgoingTLSReports in mox.conf. only at the end of the implementation process came the realization that the TLSRPT policy domain for DANE (MX) hosts are separate from the TLSRPT policy for the recipient domain, and that MTA-STS and DANE TLS/policy results are typically delivered in separate reports. so MX hosts need their own TLSRPT policies. config for the per-host TLSRPT policy should be added to mox.conf for existing installs, in field HostTLSRPT. it is automatically configured by quickstart for new installs. with a HostTLSRPT config, the "dns records" and "dns check" admin pages now suggest the per-host TLSRPT record. by creating that record, you're requesting TLS reports about your MX host. gathering all the TLS/policy results is somewhat tricky. the tentacles go throughout the code. the positive result is that the TLS/policy-related code had to be cleaned up a bit. for example, the smtpclient TLS modes now reflect reality better, with independent settings about whether PKIX and/or DANE verification has to be done, and/or whether verification errors have to be ignored (e.g. for tls-required: no header). also, cached mtasts policies of mode "none" are now cleaned up once the MTA-STS DNS record goes away.
2023-11-09 19:40:46 +03:00
tlsMode = smtpclient.TLSImmediate
new feature: when delivering messages from the queue, make it possible to use a "transport" the default transport is still just "direct delivery", where we connect to the destination domain's MX servers. other transports are: - regular smtp without authentication, this is relaying to a smarthost. - submission with authentication, e.g. to a third party email sending service. - direct delivery, but with with connections going through a socks proxy. this can be helpful if your ip is blocked, you need to get email out, and you have another IP that isn't blocked. keep in mind that for all of the above, appropriate SPF/DKIM settings have to be configured. the "dnscheck" for a domain does a check for any SOCKS IP in the SPF record. SPF for smtp/submission (ranges? includes?) and any DKIM requirements cannot really be checked. which transport is used can be configured through routes. routes can be set on an account, a domain, or globally. the routes are evaluated in that order, with the first match selecting the transport. these routes are evaluated for each delivery attempt. common selection criteria are recipient domain and sender domain, but also which delivery attempt this is. you could configured mox to attempt sending through a 3rd party from the 4th attempt onwards. routes and transports are optional. if no route matches, or an empty/zero transport is selected, normal direct delivery is done. we could already "submit" emails with 3rd party accounts with "sendmail". but we now support more SASL authentication mechanisms with SMTP (not only PLAIN, but also SCRAM-SHA-256, SCRAM-SHA-1 and CRAM-MD5), which sendmail now also supports. sendmail will use the most secure mechanism supported by the server, or the explicitly configured mechanism. for issue #36 by dmikushin. also based on earlier discussion on hackernews.
2023-06-16 19:38:28 +03:00
} else if transport.STARTTLSInsecureSkipVerify {
tlsMode = smtpclient.TLSRequiredStartTLS
implement outgoing tls reports we were already accepting, processing and displaying incoming tls reports. now we start tracking TLS connection and security-policy-related errors for outgoing message deliveries as well. we send reports once a day, to the reporting addresses specified in TLSRPT records (rua) of a policy domain. these reports are about MTA-STS policies and/or DANE policies, and about STARTTLS-related failures. sending reports is enabled by default, but can be disabled through setting NoOutgoingTLSReports in mox.conf. only at the end of the implementation process came the realization that the TLSRPT policy domain for DANE (MX) hosts are separate from the TLSRPT policy for the recipient domain, and that MTA-STS and DANE TLS/policy results are typically delivered in separate reports. so MX hosts need their own TLSRPT policies. config for the per-host TLSRPT policy should be added to mox.conf for existing installs, in field HostTLSRPT. it is automatically configured by quickstart for new installs. with a HostTLSRPT config, the "dns records" and "dns check" admin pages now suggest the per-host TLSRPT record. by creating that record, you're requesting TLS reports about your MX host. gathering all the TLS/policy results is somewhat tricky. the tentacles go throughout the code. the positive result is that the TLS/policy-related code had to be cleaned up a bit. for example, the smtpclient TLS modes now reflect reality better, with independent settings about whether PKIX and/or DANE verification has to be done, and/or whether verification errors have to be ignored (e.g. for tls-required: no header). also, cached mtasts policies of mode "none" are now cleaned up once the MTA-STS DNS record goes away.
2023-11-09 19:40:46 +03:00
tlsPKIX = false
new feature: when delivering messages from the queue, make it possible to use a "transport" the default transport is still just "direct delivery", where we connect to the destination domain's MX servers. other transports are: - regular smtp without authentication, this is relaying to a smarthost. - submission with authentication, e.g. to a third party email sending service. - direct delivery, but with with connections going through a socks proxy. this can be helpful if your ip is blocked, you need to get email out, and you have another IP that isn't blocked. keep in mind that for all of the above, appropriate SPF/DKIM settings have to be configured. the "dnscheck" for a domain does a check for any SOCKS IP in the SPF record. SPF for smtp/submission (ranges? includes?) and any DKIM requirements cannot really be checked. which transport is used can be configured through routes. routes can be set on an account, a domain, or globally. the routes are evaluated in that order, with the first match selecting the transport. these routes are evaluated for each delivery attempt. common selection criteria are recipient domain and sender domain, but also which delivery attempt this is. you could configured mox to attempt sending through a 3rd party from the 4th attempt onwards. routes and transports are optional. if no route matches, or an empty/zero transport is selected, normal direct delivery is done. we could already "submit" emails with 3rd party accounts with "sendmail". but we now support more SASL authentication mechanisms with SMTP (not only PLAIN, but also SCRAM-SHA-256, SCRAM-SHA-1 and CRAM-MD5), which sendmail now also supports. sendmail will use the most secure mechanism supported by the server, or the explicitly configured mechanism. for issue #36 by dmikushin. also based on earlier discussion on hackernews.
2023-06-16 19:38:28 +03:00
} else if transport.NoSTARTTLS {
tlsMode = smtpclient.TLSSkip
implement outgoing tls reports we were already accepting, processing and displaying incoming tls reports. now we start tracking TLS connection and security-policy-related errors for outgoing message deliveries as well. we send reports once a day, to the reporting addresses specified in TLSRPT records (rua) of a policy domain. these reports are about MTA-STS policies and/or DANE policies, and about STARTTLS-related failures. sending reports is enabled by default, but can be disabled through setting NoOutgoingTLSReports in mox.conf. only at the end of the implementation process came the realization that the TLSRPT policy domain for DANE (MX) hosts are separate from the TLSRPT policy for the recipient domain, and that MTA-STS and DANE TLS/policy results are typically delivered in separate reports. so MX hosts need their own TLSRPT policies. config for the per-host TLSRPT policy should be added to mox.conf for existing installs, in field HostTLSRPT. it is automatically configured by quickstart for new installs. with a HostTLSRPT config, the "dns records" and "dns check" admin pages now suggest the per-host TLSRPT record. by creating that record, you're requesting TLS reports about your MX host. gathering all the TLS/policy results is somewhat tricky. the tentacles go throughout the code. the positive result is that the TLS/policy-related code had to be cleaned up a bit. for example, the smtpclient TLS modes now reflect reality better, with independent settings about whether PKIX and/or DANE verification has to be done, and/or whether verification errors have to be ignored (e.g. for tls-required: no header). also, cached mtasts policies of mode "none" are now cleaned up once the MTA-STS DNS record goes away.
2023-11-09 19:40:46 +03:00
tlsPKIX = false
new feature: when delivering messages from the queue, make it possible to use a "transport" the default transport is still just "direct delivery", where we connect to the destination domain's MX servers. other transports are: - regular smtp without authentication, this is relaying to a smarthost. - submission with authentication, e.g. to a third party email sending service. - direct delivery, but with with connections going through a socks proxy. this can be helpful if your ip is blocked, you need to get email out, and you have another IP that isn't blocked. keep in mind that for all of the above, appropriate SPF/DKIM settings have to be configured. the "dnscheck" for a domain does a check for any SOCKS IP in the SPF record. SPF for smtp/submission (ranges? includes?) and any DKIM requirements cannot really be checked. which transport is used can be configured through routes. routes can be set on an account, a domain, or globally. the routes are evaluated in that order, with the first match selecting the transport. these routes are evaluated for each delivery attempt. common selection criteria are recipient domain and sender domain, but also which delivery attempt this is. you could configured mox to attempt sending through a 3rd party from the 4th attempt onwards. routes and transports are optional. if no route matches, or an empty/zero transport is selected, normal direct delivery is done. we could already "submit" emails with 3rd party accounts with "sendmail". but we now support more SASL authentication mechanisms with SMTP (not only PLAIN, but also SCRAM-SHA-256, SCRAM-SHA-1 and CRAM-MD5), which sendmail now also supports. sendmail will use the most secure mechanism supported by the server, or the explicitly configured mechanism. for issue #36 by dmikushin. also based on earlier discussion on hackernews.
2023-06-16 19:38:28 +03:00
}
start := time.Now()
var deliveryResult string
var permanent bool
var secodeOpt string
var errmsg string
var success bool
defer func() {
metricDelivery.WithLabelValues(fmt.Sprintf("%d", m.Attempts), transportName, string(tlsMode), deliveryResult).Observe(float64(time.Since(start)) / float64(time.Second))
qlog.Debug("queue deliversubmit result",
slog.Any("host", transport.DNSHost),
slog.Int("port", port),
slog.Int("attempt", m.Attempts),
slog.Bool("permanent", permanent),
slog.String("secodeopt", secodeOpt),
slog.String("errmsg", errmsg),
slog.Bool("ok", success),
slog.Duration("duration", time.Since(start)))
new feature: when delivering messages from the queue, make it possible to use a "transport" the default transport is still just "direct delivery", where we connect to the destination domain's MX servers. other transports are: - regular smtp without authentication, this is relaying to a smarthost. - submission with authentication, e.g. to a third party email sending service. - direct delivery, but with with connections going through a socks proxy. this can be helpful if your ip is blocked, you need to get email out, and you have another IP that isn't blocked. keep in mind that for all of the above, appropriate SPF/DKIM settings have to be configured. the "dnscheck" for a domain does a check for any SOCKS IP in the SPF record. SPF for smtp/submission (ranges? includes?) and any DKIM requirements cannot really be checked. which transport is used can be configured through routes. routes can be set on an account, a domain, or globally. the routes are evaluated in that order, with the first match selecting the transport. these routes are evaluated for each delivery attempt. common selection criteria are recipient domain and sender domain, but also which delivery attempt this is. you could configured mox to attempt sending through a 3rd party from the 4th attempt onwards. routes and transports are optional. if no route matches, or an empty/zero transport is selected, normal direct delivery is done. we could already "submit" emails with 3rd party accounts with "sendmail". but we now support more SASL authentication mechanisms with SMTP (not only PLAIN, but also SCRAM-SHA-256, SCRAM-SHA-1 and CRAM-MD5), which sendmail now also supports. sendmail will use the most secure mechanism supported by the server, or the explicitly configured mechanism. for issue #36 by dmikushin. also based on earlier discussion on hackernews.
2023-06-16 19:38:28 +03:00
}()
implement "requiretls", rfc 8689 with requiretls, the tls verification mode/rules for email deliveries can be changed by the sender/submitter. in two ways: 1. "requiretls" smtp extension to always enforce verified tls (with mta-sts or dnssec+dane), along the entire delivery path until delivery into the final destination mailbox (so entire transport is verified-tls-protected). 2. "tls-required: no" message header, to ignore any tls and tls verification errors even if the recipient domain has a policy that requires tls verification (mta-sts and/or dnssec+dane), allowing delivery of non-sensitive messages in case of misconfiguration/interoperability issues (at least useful for sending tls reports). we enable requiretls by default (only when tls is active), for smtp and submission. it can be disabled through the config. for each delivery attempt, we now store (per recipient domain, in the account of the sender) whether the smtp server supports starttls and requiretls. this support is shown (after having sent a first message) in the webmail when sending a message (the previous 3 bars under the address input field are now 5 bars, the first for starttls support, the last for requiretls support). when all recipient domains for a message are known to implement requiretls, requiretls is automatically selected for sending (instead of "default" tls behaviour). users can also select the "fallback to insecure" to add the "tls-required: no" header. new metrics are added for insight into requiretls errors and (some, not yet all) cases where tls-required-no ignored a tls/verification error. the admin can change the requiretls status for messages in the queue. so with default delivery attempts, when verified tls is required by failing, an admin could potentially change the field to "tls-required: no"-behaviour. messages received (over smtp) with the requiretls option, get a comment added to their Received header line, just before "id", after "with".
2023-10-24 11:06:16 +03:00
// todo: SMTP-DANE should be used when relaying on port 25.
// ../rfc/7672:1261
implement dnssec-awareness throughout code, and dane for incoming/outgoing mail delivery the vendored dns resolver code is a copy of the go stdlib dns resolver, with awareness of the "authentic data" (i.e. dnssec secure) added, as well as support for enhanced dns errors, and looking up tlsa records (for dane). ideally it would be upstreamed, but the chances seem slim. dnssec-awareness is added to all packages, e.g. spf, dkim, dmarc, iprev. their dnssec status is added to the Received message headers for incoming email. but the main reason to add dnssec was for implementing dane. with dane, the verification of tls certificates can be done through certificates/public keys published in dns (in the tlsa records). this only makes sense (is trustworthy) if those dns records can be verified to be authentic. mox now applies dane to delivering messages over smtp. mox already implemented mta-sts for webpki/pkix-verification of certificates against the (large) pool of CA's, and still enforces those policies when present. but it now also checks for dane records, and will verify those if present. if dane and mta-sts are both absent, the regular opportunistic tls with starttls is still done. and the fallback to plaintext is also still done. mox also makes it easy to setup dane for incoming deliveries, so other servers can deliver with dane tls certificate verification. the quickstart now generates private keys that are used when requesting certificates with acme. the private keys are pre-generated because they must be static and known during setup, because their public keys must be published in tlsa records in dns. autocert would generate private keys on its own, so had to be forked to add the option to provide the private key when requesting a new certificate. hopefully upstream will accept the change and we can drop the fork. with this change, using the quickstart to setup a new mox instance, the checks at internet.nl result in a 100% score, provided the domain is dnssec-signed and the network doesn't have any issues.
2023-10-10 13:09:35 +03:00
// todo: for submission, understand SRV records, and even DANE.
ctx := mox.Shutdown
implement "requiretls", rfc 8689 with requiretls, the tls verification mode/rules for email deliveries can be changed by the sender/submitter. in two ways: 1. "requiretls" smtp extension to always enforce verified tls (with mta-sts or dnssec+dane), along the entire delivery path until delivery into the final destination mailbox (so entire transport is verified-tls-protected). 2. "tls-required: no" message header, to ignore any tls and tls verification errors even if the recipient domain has a policy that requires tls verification (mta-sts and/or dnssec+dane), allowing delivery of non-sensitive messages in case of misconfiguration/interoperability issues (at least useful for sending tls reports). we enable requiretls by default (only when tls is active), for smtp and submission. it can be disabled through the config. for each delivery attempt, we now store (per recipient domain, in the account of the sender) whether the smtp server supports starttls and requiretls. this support is shown (after having sent a first message) in the webmail when sending a message (the previous 3 bars under the address input field are now 5 bars, the first for starttls support, the last for requiretls support). when all recipient domains for a message are known to implement requiretls, requiretls is automatically selected for sending (instead of "default" tls behaviour). users can also select the "fallback to insecure" to add the "tls-required: no" header. new metrics are added for insight into requiretls errors and (some, not yet all) cases where tls-required-no ignored a tls/verification error. the admin can change the requiretls status for messages in the queue. so with default delivery attempts, when verified tls is required by failing, an admin could potentially change the field to "tls-required: no"-behaviour. messages received (over smtp) with the requiretls option, get a comment added to their Received header line, just before "id", after "with".
2023-10-24 11:06:16 +03:00
// If submit was done with REQUIRETLS extension for SMTP, we must verify TLS
// certificates. If our submission connection is not configured that way, abort.
requireTLS := m.RequireTLS != nil && *m.RequireTLS
implement outgoing tls reports we were already accepting, processing and displaying incoming tls reports. now we start tracking TLS connection and security-policy-related errors for outgoing message deliveries as well. we send reports once a day, to the reporting addresses specified in TLSRPT records (rua) of a policy domain. these reports are about MTA-STS policies and/or DANE policies, and about STARTTLS-related failures. sending reports is enabled by default, but can be disabled through setting NoOutgoingTLSReports in mox.conf. only at the end of the implementation process came the realization that the TLSRPT policy domain for DANE (MX) hosts are separate from the TLSRPT policy for the recipient domain, and that MTA-STS and DANE TLS/policy results are typically delivered in separate reports. so MX hosts need their own TLSRPT policies. config for the per-host TLSRPT policy should be added to mox.conf for existing installs, in field HostTLSRPT. it is automatically configured by quickstart for new installs. with a HostTLSRPT config, the "dns records" and "dns check" admin pages now suggest the per-host TLSRPT record. by creating that record, you're requesting TLS reports about your MX host. gathering all the TLS/policy results is somewhat tricky. the tentacles go throughout the code. the positive result is that the TLS/policy-related code had to be cleaned up a bit. for example, the smtpclient TLS modes now reflect reality better, with independent settings about whether PKIX and/or DANE verification has to be done, and/or whether verification errors have to be ignored (e.g. for tls-required: no header). also, cached mtasts policies of mode "none" are now cleaned up once the MTA-STS DNS record goes away.
2023-11-09 19:40:46 +03:00
if requireTLS && (tlsMode != smtpclient.TLSRequiredStartTLS && tlsMode != smtpclient.TLSImmediate || !tlsPKIX) {
implement "requiretls", rfc 8689 with requiretls, the tls verification mode/rules for email deliveries can be changed by the sender/submitter. in two ways: 1. "requiretls" smtp extension to always enforce verified tls (with mta-sts or dnssec+dane), along the entire delivery path until delivery into the final destination mailbox (so entire transport is verified-tls-protected). 2. "tls-required: no" message header, to ignore any tls and tls verification errors even if the recipient domain has a policy that requires tls verification (mta-sts and/or dnssec+dane), allowing delivery of non-sensitive messages in case of misconfiguration/interoperability issues (at least useful for sending tls reports). we enable requiretls by default (only when tls is active), for smtp and submission. it can be disabled through the config. for each delivery attempt, we now store (per recipient domain, in the account of the sender) whether the smtp server supports starttls and requiretls. this support is shown (after having sent a first message) in the webmail when sending a message (the previous 3 bars under the address input field are now 5 bars, the first for starttls support, the last for requiretls support). when all recipient domains for a message are known to implement requiretls, requiretls is automatically selected for sending (instead of "default" tls behaviour). users can also select the "fallback to insecure" to add the "tls-required: no" header. new metrics are added for insight into requiretls errors and (some, not yet all) cases where tls-required-no ignored a tls/verification error. the admin can change the requiretls status for messages in the queue. so with default delivery attempts, when verified tls is required by failing, an admin could potentially change the field to "tls-required: no"-behaviour. messages received (over smtp) with the requiretls option, get a comment added to their Received header line, just before "id", after "with".
2023-10-24 11:06:16 +03:00
errmsg = fmt.Sprintf("transport %s: message requires verified tls but transport does not verify tls", transportName)
fail(ctx, qlog, m, backoff, true, dsn.NameIP{}, smtp.SePol7MissingReqTLS, errmsg, "", nil)
implement "requiretls", rfc 8689 with requiretls, the tls verification mode/rules for email deliveries can be changed by the sender/submitter. in two ways: 1. "requiretls" smtp extension to always enforce verified tls (with mta-sts or dnssec+dane), along the entire delivery path until delivery into the final destination mailbox (so entire transport is verified-tls-protected). 2. "tls-required: no" message header, to ignore any tls and tls verification errors even if the recipient domain has a policy that requires tls verification (mta-sts and/or dnssec+dane), allowing delivery of non-sensitive messages in case of misconfiguration/interoperability issues (at least useful for sending tls reports). we enable requiretls by default (only when tls is active), for smtp and submission. it can be disabled through the config. for each delivery attempt, we now store (per recipient domain, in the account of the sender) whether the smtp server supports starttls and requiretls. this support is shown (after having sent a first message) in the webmail when sending a message (the previous 3 bars under the address input field are now 5 bars, the first for starttls support, the last for requiretls support). when all recipient domains for a message are known to implement requiretls, requiretls is automatically selected for sending (instead of "default" tls behaviour). users can also select the "fallback to insecure" to add the "tls-required: no" header. new metrics are added for insight into requiretls errors and (some, not yet all) cases where tls-required-no ignored a tls/verification error. the admin can change the requiretls status for messages in the queue. so with default delivery attempts, when verified tls is required by failing, an admin could potentially change the field to "tls-required: no"-behaviour. messages received (over smtp) with the requiretls option, get a comment added to their Received header line, just before "id", after "with".
2023-10-24 11:06:16 +03:00
return
}
dialctx, dialcancel := context.WithTimeout(ctx, 30*time.Second)
new feature: when delivering messages from the queue, make it possible to use a "transport" the default transport is still just "direct delivery", where we connect to the destination domain's MX servers. other transports are: - regular smtp without authentication, this is relaying to a smarthost. - submission with authentication, e.g. to a third party email sending service. - direct delivery, but with with connections going through a socks proxy. this can be helpful if your ip is blocked, you need to get email out, and you have another IP that isn't blocked. keep in mind that for all of the above, appropriate SPF/DKIM settings have to be configured. the "dnscheck" for a domain does a check for any SOCKS IP in the SPF record. SPF for smtp/submission (ranges? includes?) and any DKIM requirements cannot really be checked. which transport is used can be configured through routes. routes can be set on an account, a domain, or globally. the routes are evaluated in that order, with the first match selecting the transport. these routes are evaluated for each delivery attempt. common selection criteria are recipient domain and sender domain, but also which delivery attempt this is. you could configured mox to attempt sending through a 3rd party from the 4th attempt onwards. routes and transports are optional. if no route matches, or an empty/zero transport is selected, normal direct delivery is done. we could already "submit" emails with 3rd party accounts with "sendmail". but we now support more SASL authentication mechanisms with SMTP (not only PLAIN, but also SCRAM-SHA-256, SCRAM-SHA-1 and CRAM-MD5), which sendmail now also supports. sendmail will use the most secure mechanism supported by the server, or the explicitly configured mechanism. for issue #36 by dmikushin. also based on earlier discussion on hackernews.
2023-06-16 19:38:28 +03:00
defer dialcancel()
implement dnssec-awareness throughout code, and dane for incoming/outgoing mail delivery the vendored dns resolver code is a copy of the go stdlib dns resolver, with awareness of the "authentic data" (i.e. dnssec secure) added, as well as support for enhanced dns errors, and looking up tlsa records (for dane). ideally it would be upstreamed, but the chances seem slim. dnssec-awareness is added to all packages, e.g. spf, dkim, dmarc, iprev. their dnssec status is added to the Received message headers for incoming email. but the main reason to add dnssec was for implementing dane. with dane, the verification of tls certificates can be done through certificates/public keys published in dns (in the tlsa records). this only makes sense (is trustworthy) if those dns records can be verified to be authentic. mox now applies dane to delivering messages over smtp. mox already implemented mta-sts for webpki/pkix-verification of certificates against the (large) pool of CA's, and still enforces those policies when present. but it now also checks for dane records, and will verify those if present. if dane and mta-sts are both absent, the regular opportunistic tls with starttls is still done. and the fallback to plaintext is also still done. mox also makes it easy to setup dane for incoming deliveries, so other servers can deliver with dane tls certificate verification. the quickstart now generates private keys that are used when requesting certificates with acme. the private keys are pre-generated because they must be static and known during setup, because their public keys must be published in tlsa records in dns. autocert would generate private keys on its own, so had to be forked to add the option to provide the private key when requesting a new certificate. hopefully upstream will accept the change and we can drop the fork. with this change, using the quickstart to setup a new mox instance, the checks at internet.nl result in a 100% score, provided the domain is dnssec-signed and the network doesn't have any issues.
2023-10-10 13:09:35 +03:00
if m.DialedIPs == nil {
m.DialedIPs = map[string][]net.IP{}
}
_, _, _, ips, _, err := smtpclient.GatherIPs(dialctx, qlog.Logger, resolver, dns.IPDomain{Domain: transport.DNSHost}, m.DialedIPs)
implement dnssec-awareness throughout code, and dane for incoming/outgoing mail delivery the vendored dns resolver code is a copy of the go stdlib dns resolver, with awareness of the "authentic data" (i.e. dnssec secure) added, as well as support for enhanced dns errors, and looking up tlsa records (for dane). ideally it would be upstreamed, but the chances seem slim. dnssec-awareness is added to all packages, e.g. spf, dkim, dmarc, iprev. their dnssec status is added to the Received message headers for incoming email. but the main reason to add dnssec was for implementing dane. with dane, the verification of tls certificates can be done through certificates/public keys published in dns (in the tlsa records). this only makes sense (is trustworthy) if those dns records can be verified to be authentic. mox now applies dane to delivering messages over smtp. mox already implemented mta-sts for webpki/pkix-verification of certificates against the (large) pool of CA's, and still enforces those policies when present. but it now also checks for dane records, and will verify those if present. if dane and mta-sts are both absent, the regular opportunistic tls with starttls is still done. and the fallback to plaintext is also still done. mox also makes it easy to setup dane for incoming deliveries, so other servers can deliver with dane tls certificate verification. the quickstart now generates private keys that are used when requesting certificates with acme. the private keys are pre-generated because they must be static and known during setup, because their public keys must be published in tlsa records in dns. autocert would generate private keys on its own, so had to be forked to add the option to provide the private key when requesting a new certificate. hopefully upstream will accept the change and we can drop the fork. with this change, using the quickstart to setup a new mox instance, the checks at internet.nl result in a 100% score, provided the domain is dnssec-signed and the network doesn't have any issues.
2023-10-10 13:09:35 +03:00
var conn net.Conn
if err == nil {
if m.DialedIPs == nil {
m.DialedIPs = map[string][]net.IP{}
}
conn, _, err = smtpclient.Dial(dialctx, qlog.Logger, dialer, dns.IPDomain{Domain: transport.DNSHost}, ips, port, m.DialedIPs, mox.Conf.Static.SpecifiedSMTPListenIPs)
implement dnssec-awareness throughout code, and dane for incoming/outgoing mail delivery the vendored dns resolver code is a copy of the go stdlib dns resolver, with awareness of the "authentic data" (i.e. dnssec secure) added, as well as support for enhanced dns errors, and looking up tlsa records (for dane). ideally it would be upstreamed, but the chances seem slim. dnssec-awareness is added to all packages, e.g. spf, dkim, dmarc, iprev. their dnssec status is added to the Received message headers for incoming email. but the main reason to add dnssec was for implementing dane. with dane, the verification of tls certificates can be done through certificates/public keys published in dns (in the tlsa records). this only makes sense (is trustworthy) if those dns records can be verified to be authentic. mox now applies dane to delivering messages over smtp. mox already implemented mta-sts for webpki/pkix-verification of certificates against the (large) pool of CA's, and still enforces those policies when present. but it now also checks for dane records, and will verify those if present. if dane and mta-sts are both absent, the regular opportunistic tls with starttls is still done. and the fallback to plaintext is also still done. mox also makes it easy to setup dane for incoming deliveries, so other servers can deliver with dane tls certificate verification. the quickstart now generates private keys that are used when requesting certificates with acme. the private keys are pre-generated because they must be static and known during setup, because their public keys must be published in tlsa records in dns. autocert would generate private keys on its own, so had to be forked to add the option to provide the private key when requesting a new certificate. hopefully upstream will accept the change and we can drop the fork. with this change, using the quickstart to setup a new mox instance, the checks at internet.nl result in a 100% score, provided the domain is dnssec-signed and the network doesn't have any issues.
2023-10-10 13:09:35 +03:00
}
new feature: when delivering messages from the queue, make it possible to use a "transport" the default transport is still just "direct delivery", where we connect to the destination domain's MX servers. other transports are: - regular smtp without authentication, this is relaying to a smarthost. - submission with authentication, e.g. to a third party email sending service. - direct delivery, but with with connections going through a socks proxy. this can be helpful if your ip is blocked, you need to get email out, and you have another IP that isn't blocked. keep in mind that for all of the above, appropriate SPF/DKIM settings have to be configured. the "dnscheck" for a domain does a check for any SOCKS IP in the SPF record. SPF for smtp/submission (ranges? includes?) and any DKIM requirements cannot really be checked. which transport is used can be configured through routes. routes can be set on an account, a domain, or globally. the routes are evaluated in that order, with the first match selecting the transport. these routes are evaluated for each delivery attempt. common selection criteria are recipient domain and sender domain, but also which delivery attempt this is. you could configured mox to attempt sending through a 3rd party from the 4th attempt onwards. routes and transports are optional. if no route matches, or an empty/zero transport is selected, normal direct delivery is done. we could already "submit" emails with 3rd party accounts with "sendmail". but we now support more SASL authentication mechanisms with SMTP (not only PLAIN, but also SCRAM-SHA-256, SCRAM-SHA-1 and CRAM-MD5), which sendmail now also supports. sendmail will use the most secure mechanism supported by the server, or the explicitly configured mechanism. for issue #36 by dmikushin. also based on earlier discussion on hackernews.
2023-06-16 19:38:28 +03:00
addr := net.JoinHostPort(transport.Host, fmt.Sprintf("%d", port))
var result string
switch {
case err == nil:
result = "ok"
case errors.Is(err, os.ErrDeadlineExceeded), errors.Is(err, context.DeadlineExceeded):
result = "timeout"
case errors.Is(err, context.Canceled):
result = "canceled"
default:
result = "error"
}
metricConnection.WithLabelValues(result).Inc()
if err != nil {
if conn != nil {
err := conn.Close()
qlog.Check(err, "closing connection")
}
qlog.Errorx("dialing for submission", err, slog.String("remote", addr))
new feature: when delivering messages from the queue, make it possible to use a "transport" the default transport is still just "direct delivery", where we connect to the destination domain's MX servers. other transports are: - regular smtp without authentication, this is relaying to a smarthost. - submission with authentication, e.g. to a third party email sending service. - direct delivery, but with with connections going through a socks proxy. this can be helpful if your ip is blocked, you need to get email out, and you have another IP that isn't blocked. keep in mind that for all of the above, appropriate SPF/DKIM settings have to be configured. the "dnscheck" for a domain does a check for any SOCKS IP in the SPF record. SPF for smtp/submission (ranges? includes?) and any DKIM requirements cannot really be checked. which transport is used can be configured through routes. routes can be set on an account, a domain, or globally. the routes are evaluated in that order, with the first match selecting the transport. these routes are evaluated for each delivery attempt. common selection criteria are recipient domain and sender domain, but also which delivery attempt this is. you could configured mox to attempt sending through a 3rd party from the 4th attempt onwards. routes and transports are optional. if no route matches, or an empty/zero transport is selected, normal direct delivery is done. we could already "submit" emails with 3rd party accounts with "sendmail". but we now support more SASL authentication mechanisms with SMTP (not only PLAIN, but also SCRAM-SHA-256, SCRAM-SHA-1 and CRAM-MD5), which sendmail now also supports. sendmail will use the most secure mechanism supported by the server, or the explicitly configured mechanism. for issue #36 by dmikushin. also based on earlier discussion on hackernews.
2023-06-16 19:38:28 +03:00
errmsg = fmt.Sprintf("transport %s: dialing %s for submission: %v", transportName, addr, err)
fail(ctx, qlog, m, backoff, false, dsn.NameIP{}, "", errmsg, "", nil)
new feature: when delivering messages from the queue, make it possible to use a "transport" the default transport is still just "direct delivery", where we connect to the destination domain's MX servers. other transports are: - regular smtp without authentication, this is relaying to a smarthost. - submission with authentication, e.g. to a third party email sending service. - direct delivery, but with with connections going through a socks proxy. this can be helpful if your ip is blocked, you need to get email out, and you have another IP that isn't blocked. keep in mind that for all of the above, appropriate SPF/DKIM settings have to be configured. the "dnscheck" for a domain does a check for any SOCKS IP in the SPF record. SPF for smtp/submission (ranges? includes?) and any DKIM requirements cannot really be checked. which transport is used can be configured through routes. routes can be set on an account, a domain, or globally. the routes are evaluated in that order, with the first match selecting the transport. these routes are evaluated for each delivery attempt. common selection criteria are recipient domain and sender domain, but also which delivery attempt this is. you could configured mox to attempt sending through a 3rd party from the 4th attempt onwards. routes and transports are optional. if no route matches, or an empty/zero transport is selected, normal direct delivery is done. we could already "submit" emails with 3rd party accounts with "sendmail". but we now support more SASL authentication mechanisms with SMTP (not only PLAIN, but also SCRAM-SHA-256, SCRAM-SHA-1 and CRAM-MD5), which sendmail now also supports. sendmail will use the most secure mechanism supported by the server, or the explicitly configured mechanism. for issue #36 by dmikushin. also based on earlier discussion on hackernews.
2023-06-16 19:38:28 +03:00
return
}
dialcancel()
var auth func(mechanisms []string, cs *tls.ConnectionState) (sasl.Client, error)
new feature: when delivering messages from the queue, make it possible to use a "transport" the default transport is still just "direct delivery", where we connect to the destination domain's MX servers. other transports are: - regular smtp without authentication, this is relaying to a smarthost. - submission with authentication, e.g. to a third party email sending service. - direct delivery, but with with connections going through a socks proxy. this can be helpful if your ip is blocked, you need to get email out, and you have another IP that isn't blocked. keep in mind that for all of the above, appropriate SPF/DKIM settings have to be configured. the "dnscheck" for a domain does a check for any SOCKS IP in the SPF record. SPF for smtp/submission (ranges? includes?) and any DKIM requirements cannot really be checked. which transport is used can be configured through routes. routes can be set on an account, a domain, or globally. the routes are evaluated in that order, with the first match selecting the transport. these routes are evaluated for each delivery attempt. common selection criteria are recipient domain and sender domain, but also which delivery attempt this is. you could configured mox to attempt sending through a 3rd party from the 4th attempt onwards. routes and transports are optional. if no route matches, or an empty/zero transport is selected, normal direct delivery is done. we could already "submit" emails with 3rd party accounts with "sendmail". but we now support more SASL authentication mechanisms with SMTP (not only PLAIN, but also SCRAM-SHA-256, SCRAM-SHA-1 and CRAM-MD5), which sendmail now also supports. sendmail will use the most secure mechanism supported by the server, or the explicitly configured mechanism. for issue #36 by dmikushin. also based on earlier discussion on hackernews.
2023-06-16 19:38:28 +03:00
if transport.Auth != nil {
a := transport.Auth
auth = func(mechanisms []string, cs *tls.ConnectionState) (sasl.Client, error) {
var supportsscramsha1plus, supportsscramsha256plus bool
for _, mech := range a.EffectiveMechanisms {
if !slices.Contains(mechanisms, mech) {
switch mech {
case "SCRAM-SHA-1-PLUS":
supportsscramsha1plus = cs != nil
case "SCRAM-SHA-256-PLUS":
supportsscramsha256plus = cs != nil
}
continue
}
if mech == "SCRAM-SHA-256-PLUS" && cs != nil {
return sasl.NewClientSCRAMSHA256PLUS(a.Username, a.Password, *cs), nil
} else if mech == "SCRAM-SHA-256" {
return sasl.NewClientSCRAMSHA256(a.Username, a.Password, supportsscramsha256plus), nil
} else if mech == "SCRAM-SHA-1-PLUS" && cs != nil {
return sasl.NewClientSCRAMSHA1PLUS(a.Username, a.Password, *cs), nil
} else if mech == "SCRAM-SHA-1" {
return sasl.NewClientSCRAMSHA1(a.Username, a.Password, supportsscramsha1plus), nil
} else if mech == "CRAM-MD5" {
return sasl.NewClientCRAMMD5(a.Username, a.Password), nil
} else if mech == "PLAIN" {
return sasl.NewClientPlain(a.Username, a.Password), nil
}
return nil, fmt.Errorf("internal error: unrecognized authentication mechanism %q for transport %s", mech, transportName)
new feature: when delivering messages from the queue, make it possible to use a "transport" the default transport is still just "direct delivery", where we connect to the destination domain's MX servers. other transports are: - regular smtp without authentication, this is relaying to a smarthost. - submission with authentication, e.g. to a third party email sending service. - direct delivery, but with with connections going through a socks proxy. this can be helpful if your ip is blocked, you need to get email out, and you have another IP that isn't blocked. keep in mind that for all of the above, appropriate SPF/DKIM settings have to be configured. the "dnscheck" for a domain does a check for any SOCKS IP in the SPF record. SPF for smtp/submission (ranges? includes?) and any DKIM requirements cannot really be checked. which transport is used can be configured through routes. routes can be set on an account, a domain, or globally. the routes are evaluated in that order, with the first match selecting the transport. these routes are evaluated for each delivery attempt. common selection criteria are recipient domain and sender domain, but also which delivery attempt this is. you could configured mox to attempt sending through a 3rd party from the 4th attempt onwards. routes and transports are optional. if no route matches, or an empty/zero transport is selected, normal direct delivery is done. we could already "submit" emails with 3rd party accounts with "sendmail". but we now support more SASL authentication mechanisms with SMTP (not only PLAIN, but also SCRAM-SHA-256, SCRAM-SHA-1 and CRAM-MD5), which sendmail now also supports. sendmail will use the most secure mechanism supported by the server, or the explicitly configured mechanism. for issue #36 by dmikushin. also based on earlier discussion on hackernews.
2023-06-16 19:38:28 +03:00
}
// No mutually supported algorithm.
return nil, nil
new feature: when delivering messages from the queue, make it possible to use a "transport" the default transport is still just "direct delivery", where we connect to the destination domain's MX servers. other transports are: - regular smtp without authentication, this is relaying to a smarthost. - submission with authentication, e.g. to a third party email sending service. - direct delivery, but with with connections going through a socks proxy. this can be helpful if your ip is blocked, you need to get email out, and you have another IP that isn't blocked. keep in mind that for all of the above, appropriate SPF/DKIM settings have to be configured. the "dnscheck" for a domain does a check for any SOCKS IP in the SPF record. SPF for smtp/submission (ranges? includes?) and any DKIM requirements cannot really be checked. which transport is used can be configured through routes. routes can be set on an account, a domain, or globally. the routes are evaluated in that order, with the first match selecting the transport. these routes are evaluated for each delivery attempt. common selection criteria are recipient domain and sender domain, but also which delivery attempt this is. you could configured mox to attempt sending through a 3rd party from the 4th attempt onwards. routes and transports are optional. if no route matches, or an empty/zero transport is selected, normal direct delivery is done. we could already "submit" emails with 3rd party accounts with "sendmail". but we now support more SASL authentication mechanisms with SMTP (not only PLAIN, but also SCRAM-SHA-256, SCRAM-SHA-1 and CRAM-MD5), which sendmail now also supports. sendmail will use the most secure mechanism supported by the server, or the explicitly configured mechanism. for issue #36 by dmikushin. also based on earlier discussion on hackernews.
2023-06-16 19:38:28 +03:00
}
}
clientctx, clientcancel := context.WithTimeout(context.Background(), 60*time.Second)
defer clientcancel()
implement outgoing tls reports we were already accepting, processing and displaying incoming tls reports. now we start tracking TLS connection and security-policy-related errors for outgoing message deliveries as well. we send reports once a day, to the reporting addresses specified in TLSRPT records (rua) of a policy domain. these reports are about MTA-STS policies and/or DANE policies, and about STARTTLS-related failures. sending reports is enabled by default, but can be disabled through setting NoOutgoingTLSReports in mox.conf. only at the end of the implementation process came the realization that the TLSRPT policy domain for DANE (MX) hosts are separate from the TLSRPT policy for the recipient domain, and that MTA-STS and DANE TLS/policy results are typically delivered in separate reports. so MX hosts need their own TLSRPT policies. config for the per-host TLSRPT policy should be added to mox.conf for existing installs, in field HostTLSRPT. it is automatically configured by quickstart for new installs. with a HostTLSRPT config, the "dns records" and "dns check" admin pages now suggest the per-host TLSRPT record. by creating that record, you're requesting TLS reports about your MX host. gathering all the TLS/policy results is somewhat tricky. the tentacles go throughout the code. the positive result is that the TLS/policy-related code had to be cleaned up a bit. for example, the smtpclient TLS modes now reflect reality better, with independent settings about whether PKIX and/or DANE verification has to be done, and/or whether verification errors have to be ignored (e.g. for tls-required: no header). also, cached mtasts policies of mode "none" are now cleaned up once the MTA-STS DNS record goes away.
2023-11-09 19:40:46 +03:00
opts := smtpclient.Opts{
Auth: auth,
RootCAs: mox.Conf.Static.TLS.CertPool,
}
client, err := smtpclient.New(clientctx, qlog.Logger, conn, tlsMode, tlsPKIX, mox.Conf.Static.HostnameDomain, transport.DNSHost, opts)
new feature: when delivering messages from the queue, make it possible to use a "transport" the default transport is still just "direct delivery", where we connect to the destination domain's MX servers. other transports are: - regular smtp without authentication, this is relaying to a smarthost. - submission with authentication, e.g. to a third party email sending service. - direct delivery, but with with connections going through a socks proxy. this can be helpful if your ip is blocked, you need to get email out, and you have another IP that isn't blocked. keep in mind that for all of the above, appropriate SPF/DKIM settings have to be configured. the "dnscheck" for a domain does a check for any SOCKS IP in the SPF record. SPF for smtp/submission (ranges? includes?) and any DKIM requirements cannot really be checked. which transport is used can be configured through routes. routes can be set on an account, a domain, or globally. the routes are evaluated in that order, with the first match selecting the transport. these routes are evaluated for each delivery attempt. common selection criteria are recipient domain and sender domain, but also which delivery attempt this is. you could configured mox to attempt sending through a 3rd party from the 4th attempt onwards. routes and transports are optional. if no route matches, or an empty/zero transport is selected, normal direct delivery is done. we could already "submit" emails with 3rd party accounts with "sendmail". but we now support more SASL authentication mechanisms with SMTP (not only PLAIN, but also SCRAM-SHA-256, SCRAM-SHA-1 and CRAM-MD5), which sendmail now also supports. sendmail will use the most secure mechanism supported by the server, or the explicitly configured mechanism. for issue #36 by dmikushin. also based on earlier discussion on hackernews.
2023-06-16 19:38:28 +03:00
if err != nil {
smtperr, ok := err.(smtpclient.Error)
var remoteMTA dsn.NameIP
if ok {
remoteMTA.Name = transport.Host
}
qlog.Errorx("establishing smtp session for submission", err, slog.String("remote", addr))
new feature: when delivering messages from the queue, make it possible to use a "transport" the default transport is still just "direct delivery", where we connect to the destination domain's MX servers. other transports are: - regular smtp without authentication, this is relaying to a smarthost. - submission with authentication, e.g. to a third party email sending service. - direct delivery, but with with connections going through a socks proxy. this can be helpful if your ip is blocked, you need to get email out, and you have another IP that isn't blocked. keep in mind that for all of the above, appropriate SPF/DKIM settings have to be configured. the "dnscheck" for a domain does a check for any SOCKS IP in the SPF record. SPF for smtp/submission (ranges? includes?) and any DKIM requirements cannot really be checked. which transport is used can be configured through routes. routes can be set on an account, a domain, or globally. the routes are evaluated in that order, with the first match selecting the transport. these routes are evaluated for each delivery attempt. common selection criteria are recipient domain and sender domain, but also which delivery attempt this is. you could configured mox to attempt sending through a 3rd party from the 4th attempt onwards. routes and transports are optional. if no route matches, or an empty/zero transport is selected, normal direct delivery is done. we could already "submit" emails with 3rd party accounts with "sendmail". but we now support more SASL authentication mechanisms with SMTP (not only PLAIN, but also SCRAM-SHA-256, SCRAM-SHA-1 and CRAM-MD5), which sendmail now also supports. sendmail will use the most secure mechanism supported by the server, or the explicitly configured mechanism. for issue #36 by dmikushin. also based on earlier discussion on hackernews.
2023-06-16 19:38:28 +03:00
errmsg = fmt.Sprintf("transport %s: establishing smtp session with %s for submission: %v", transportName, addr, err)
secodeOpt = smtperr.Secode
fail(ctx, qlog, m, backoff, false, remoteMTA, secodeOpt, errmsg, smtperr.Line, smtperr.MoreLines)
new feature: when delivering messages from the queue, make it possible to use a "transport" the default transport is still just "direct delivery", where we connect to the destination domain's MX servers. other transports are: - regular smtp without authentication, this is relaying to a smarthost. - submission with authentication, e.g. to a third party email sending service. - direct delivery, but with with connections going through a socks proxy. this can be helpful if your ip is blocked, you need to get email out, and you have another IP that isn't blocked. keep in mind that for all of the above, appropriate SPF/DKIM settings have to be configured. the "dnscheck" for a domain does a check for any SOCKS IP in the SPF record. SPF for smtp/submission (ranges? includes?) and any DKIM requirements cannot really be checked. which transport is used can be configured through routes. routes can be set on an account, a domain, or globally. the routes are evaluated in that order, with the first match selecting the transport. these routes are evaluated for each delivery attempt. common selection criteria are recipient domain and sender domain, but also which delivery attempt this is. you could configured mox to attempt sending through a 3rd party from the 4th attempt onwards. routes and transports are optional. if no route matches, or an empty/zero transport is selected, normal direct delivery is done. we could already "submit" emails with 3rd party accounts with "sendmail". but we now support more SASL authentication mechanisms with SMTP (not only PLAIN, but also SCRAM-SHA-256, SCRAM-SHA-1 and CRAM-MD5), which sendmail now also supports. sendmail will use the most secure mechanism supported by the server, or the explicitly configured mechanism. for issue #36 by dmikushin. also based on earlier discussion on hackernews.
2023-06-16 19:38:28 +03:00
return
}
defer func() {
err := client.Close()
qlog.Check(err, "closing smtp client after delivery")
}()
clientcancel()
var msgr io.ReadCloser
var size int64
var req8bit, reqsmtputf8 bool
if len(m.DSNUTF8) > 0 && client.SupportsSMTPUTF8() {
msgr = io.NopCloser(bytes.NewReader(m.DSNUTF8))
reqsmtputf8 = true
size = int64(len(m.DSNUTF8))
} else {
req8bit = m.Has8bit // todo: not require this, but just try to submit?
size = m.Size
p := m.MessagePath()
f, err := os.Open(p)
if err != nil {
qlog.Errorx("opening message for delivery", err, slog.String("remote", addr), slog.String("path", p))
new feature: when delivering messages from the queue, make it possible to use a "transport" the default transport is still just "direct delivery", where we connect to the destination domain's MX servers. other transports are: - regular smtp without authentication, this is relaying to a smarthost. - submission with authentication, e.g. to a third party email sending service. - direct delivery, but with with connections going through a socks proxy. this can be helpful if your ip is blocked, you need to get email out, and you have another IP that isn't blocked. keep in mind that for all of the above, appropriate SPF/DKIM settings have to be configured. the "dnscheck" for a domain does a check for any SOCKS IP in the SPF record. SPF for smtp/submission (ranges? includes?) and any DKIM requirements cannot really be checked. which transport is used can be configured through routes. routes can be set on an account, a domain, or globally. the routes are evaluated in that order, with the first match selecting the transport. these routes are evaluated for each delivery attempt. common selection criteria are recipient domain and sender domain, but also which delivery attempt this is. you could configured mox to attempt sending through a 3rd party from the 4th attempt onwards. routes and transports are optional. if no route matches, or an empty/zero transport is selected, normal direct delivery is done. we could already "submit" emails with 3rd party accounts with "sendmail". but we now support more SASL authentication mechanisms with SMTP (not only PLAIN, but also SCRAM-SHA-256, SCRAM-SHA-1 and CRAM-MD5), which sendmail now also supports. sendmail will use the most secure mechanism supported by the server, or the explicitly configured mechanism. for issue #36 by dmikushin. also based on earlier discussion on hackernews.
2023-06-16 19:38:28 +03:00
errmsg = fmt.Sprintf("transport %s: opening message file for submission: %v", transportName, err)
fail(ctx, qlog, m, backoff, false, dsn.NameIP{}, "", errmsg, "", nil)
new feature: when delivering messages from the queue, make it possible to use a "transport" the default transport is still just "direct delivery", where we connect to the destination domain's MX servers. other transports are: - regular smtp without authentication, this is relaying to a smarthost. - submission with authentication, e.g. to a third party email sending service. - direct delivery, but with with connections going through a socks proxy. this can be helpful if your ip is blocked, you need to get email out, and you have another IP that isn't blocked. keep in mind that for all of the above, appropriate SPF/DKIM settings have to be configured. the "dnscheck" for a domain does a check for any SOCKS IP in the SPF record. SPF for smtp/submission (ranges? includes?) and any DKIM requirements cannot really be checked. which transport is used can be configured through routes. routes can be set on an account, a domain, or globally. the routes are evaluated in that order, with the first match selecting the transport. these routes are evaluated for each delivery attempt. common selection criteria are recipient domain and sender domain, but also which delivery attempt this is. you could configured mox to attempt sending through a 3rd party from the 4th attempt onwards. routes and transports are optional. if no route matches, or an empty/zero transport is selected, normal direct delivery is done. we could already "submit" emails with 3rd party accounts with "sendmail". but we now support more SASL authentication mechanisms with SMTP (not only PLAIN, but also SCRAM-SHA-256, SCRAM-SHA-1 and CRAM-MD5), which sendmail now also supports. sendmail will use the most secure mechanism supported by the server, or the explicitly configured mechanism. for issue #36 by dmikushin. also based on earlier discussion on hackernews.
2023-06-16 19:38:28 +03:00
return
}
msgr = store.FileMsgReader(m.MsgPrefix, f)
defer func() {
err := msgr.Close()
qlog.Check(err, "closing message after delivery attempt")
}()
}
deliverctx, delivercancel := context.WithTimeout(context.Background(), time.Duration(60+size/(1024*1024))*time.Second)
defer delivercancel()
implement "requiretls", rfc 8689 with requiretls, the tls verification mode/rules for email deliveries can be changed by the sender/submitter. in two ways: 1. "requiretls" smtp extension to always enforce verified tls (with mta-sts or dnssec+dane), along the entire delivery path until delivery into the final destination mailbox (so entire transport is verified-tls-protected). 2. "tls-required: no" message header, to ignore any tls and tls verification errors even if the recipient domain has a policy that requires tls verification (mta-sts and/or dnssec+dane), allowing delivery of non-sensitive messages in case of misconfiguration/interoperability issues (at least useful for sending tls reports). we enable requiretls by default (only when tls is active), for smtp and submission. it can be disabled through the config. for each delivery attempt, we now store (per recipient domain, in the account of the sender) whether the smtp server supports starttls and requiretls. this support is shown (after having sent a first message) in the webmail when sending a message (the previous 3 bars under the address input field are now 5 bars, the first for starttls support, the last for requiretls support). when all recipient domains for a message are known to implement requiretls, requiretls is automatically selected for sending (instead of "default" tls behaviour). users can also select the "fallback to insecure" to add the "tls-required: no" header. new metrics are added for insight into requiretls errors and (some, not yet all) cases where tls-required-no ignored a tls/verification error. the admin can change the requiretls status for messages in the queue. so with default delivery attempts, when verified tls is required by failing, an admin could potentially change the field to "tls-required: no"-behaviour. messages received (over smtp) with the requiretls option, get a comment added to their Received header line, just before "id", after "with".
2023-10-24 11:06:16 +03:00
err = client.Deliver(deliverctx, m.Sender().String(), m.Recipient().String(), size, msgr, req8bit, reqsmtputf8, requireTLS)
new feature: when delivering messages from the queue, make it possible to use a "transport" the default transport is still just "direct delivery", where we connect to the destination domain's MX servers. other transports are: - regular smtp without authentication, this is relaying to a smarthost. - submission with authentication, e.g. to a third party email sending service. - direct delivery, but with with connections going through a socks proxy. this can be helpful if your ip is blocked, you need to get email out, and you have another IP that isn't blocked. keep in mind that for all of the above, appropriate SPF/DKIM settings have to be configured. the "dnscheck" for a domain does a check for any SOCKS IP in the SPF record. SPF for smtp/submission (ranges? includes?) and any DKIM requirements cannot really be checked. which transport is used can be configured through routes. routes can be set on an account, a domain, or globally. the routes are evaluated in that order, with the first match selecting the transport. these routes are evaluated for each delivery attempt. common selection criteria are recipient domain and sender domain, but also which delivery attempt this is. you could configured mox to attempt sending through a 3rd party from the 4th attempt onwards. routes and transports are optional. if no route matches, or an empty/zero transport is selected, normal direct delivery is done. we could already "submit" emails with 3rd party accounts with "sendmail". but we now support more SASL authentication mechanisms with SMTP (not only PLAIN, but also SCRAM-SHA-256, SCRAM-SHA-1 and CRAM-MD5), which sendmail now also supports. sendmail will use the most secure mechanism supported by the server, or the explicitly configured mechanism. for issue #36 by dmikushin. also based on earlier discussion on hackernews.
2023-06-16 19:38:28 +03:00
if err != nil {
qlog.Infox("delivery failed", err)
}
var cerr smtpclient.Error
switch {
case err == nil:
deliveryResult = "ok"
success = true
case errors.Is(err, os.ErrDeadlineExceeded), errors.Is(err, context.DeadlineExceeded):
deliveryResult = "timeout"
case errors.Is(err, context.Canceled):
deliveryResult = "canceled"
case errors.As(err, &cerr):
deliveryResult = "temperror"
if cerr.Permanent {
deliveryResult = "permerror"
}
default:
deliveryResult = "error"
}
if err != nil {
smtperr, ok := err.(smtpclient.Error)
var remoteMTA dsn.NameIP
if ok {
remoteMTA.Name = transport.Host
}
qlog.Errorx("submitting email", err, slog.String("remote", addr))
new feature: when delivering messages from the queue, make it possible to use a "transport" the default transport is still just "direct delivery", where we connect to the destination domain's MX servers. other transports are: - regular smtp without authentication, this is relaying to a smarthost. - submission with authentication, e.g. to a third party email sending service. - direct delivery, but with with connections going through a socks proxy. this can be helpful if your ip is blocked, you need to get email out, and you have another IP that isn't blocked. keep in mind that for all of the above, appropriate SPF/DKIM settings have to be configured. the "dnscheck" for a domain does a check for any SOCKS IP in the SPF record. SPF for smtp/submission (ranges? includes?) and any DKIM requirements cannot really be checked. which transport is used can be configured through routes. routes can be set on an account, a domain, or globally. the routes are evaluated in that order, with the first match selecting the transport. these routes are evaluated for each delivery attempt. common selection criteria are recipient domain and sender domain, but also which delivery attempt this is. you could configured mox to attempt sending through a 3rd party from the 4th attempt onwards. routes and transports are optional. if no route matches, or an empty/zero transport is selected, normal direct delivery is done. we could already "submit" emails with 3rd party accounts with "sendmail". but we now support more SASL authentication mechanisms with SMTP (not only PLAIN, but also SCRAM-SHA-256, SCRAM-SHA-1 and CRAM-MD5), which sendmail now also supports. sendmail will use the most secure mechanism supported by the server, or the explicitly configured mechanism. for issue #36 by dmikushin. also based on earlier discussion on hackernews.
2023-06-16 19:38:28 +03:00
permanent = smtperr.Permanent
secodeOpt = smtperr.Secode
errmsg = fmt.Sprintf("transport %s: submitting email to %s: %v", transportName, addr, err)
fail(ctx, qlog, m, backoff, permanent, remoteMTA, secodeOpt, errmsg, smtperr.Line, smtperr.MoreLines)
new feature: when delivering messages from the queue, make it possible to use a "transport" the default transport is still just "direct delivery", where we connect to the destination domain's MX servers. other transports are: - regular smtp without authentication, this is relaying to a smarthost. - submission with authentication, e.g. to a third party email sending service. - direct delivery, but with with connections going through a socks proxy. this can be helpful if your ip is blocked, you need to get email out, and you have another IP that isn't blocked. keep in mind that for all of the above, appropriate SPF/DKIM settings have to be configured. the "dnscheck" for a domain does a check for any SOCKS IP in the SPF record. SPF for smtp/submission (ranges? includes?) and any DKIM requirements cannot really be checked. which transport is used can be configured through routes. routes can be set on an account, a domain, or globally. the routes are evaluated in that order, with the first match selecting the transport. these routes are evaluated for each delivery attempt. common selection criteria are recipient domain and sender domain, but also which delivery attempt this is. you could configured mox to attempt sending through a 3rd party from the 4th attempt onwards. routes and transports are optional. if no route matches, or an empty/zero transport is selected, normal direct delivery is done. we could already "submit" emails with 3rd party accounts with "sendmail". but we now support more SASL authentication mechanisms with SMTP (not only PLAIN, but also SCRAM-SHA-256, SCRAM-SHA-1 and CRAM-MD5), which sendmail now also supports. sendmail will use the most secure mechanism supported by the server, or the explicitly configured mechanism. for issue #36 by dmikushin. also based on earlier discussion on hackernews.
2023-06-16 19:38:28 +03:00
return
}
qlog.Info("delivered from queue with transport")
if err := queueDelete(context.Background(), m.ID); err != nil {
qlog.Errorx("deleting message from queue after delivery", err)
}
}