mox/integration_test.go

188 lines
5.7 KiB
Go
Raw Normal View History

2023-01-30 16:27:06 +03:00
//go:build integration
package main
import (
"crypto/tls"
2023-01-30 16:27:06 +03:00
"fmt"
"net"
"os"
"os/exec"
2023-01-30 16:27:06 +03:00
"strings"
"testing"
"time"
new feature: when delivering messages from the queue, make it possible to use a "transport" the default transport is still just "direct delivery", where we connect to the destination domain's MX servers. other transports are: - regular smtp without authentication, this is relaying to a smarthost. - submission with authentication, e.g. to a third party email sending service. - direct delivery, but with with connections going through a socks proxy. this can be helpful if your ip is blocked, you need to get email out, and you have another IP that isn't blocked. keep in mind that for all of the above, appropriate SPF/DKIM settings have to be configured. the "dnscheck" for a domain does a check for any SOCKS IP in the SPF record. SPF for smtp/submission (ranges? includes?) and any DKIM requirements cannot really be checked. which transport is used can be configured through routes. routes can be set on an account, a domain, or globally. the routes are evaluated in that order, with the first match selecting the transport. these routes are evaluated for each delivery attempt. common selection criteria are recipient domain and sender domain, but also which delivery attempt this is. you could configured mox to attempt sending through a 3rd party from the 4th attempt onwards. routes and transports are optional. if no route matches, or an empty/zero transport is selected, normal direct delivery is done. we could already "submit" emails with 3rd party accounts with "sendmail". but we now support more SASL authentication mechanisms with SMTP (not only PLAIN, but also SCRAM-SHA-256, SCRAM-SHA-1 and CRAM-MD5), which sendmail now also supports. sendmail will use the most secure mechanism supported by the server, or the explicitly configured mechanism. for issue #36 by dmikushin. also based on earlier discussion on hackernews.
2023-06-16 19:38:28 +03:00
"github.com/mjl-/mox/dns"
"github.com/mjl-/mox/imapclient"
2023-01-30 16:27:06 +03:00
"github.com/mjl-/mox/mlog"
"github.com/mjl-/mox/mox-"
new feature: when delivering messages from the queue, make it possible to use a "transport" the default transport is still just "direct delivery", where we connect to the destination domain's MX servers. other transports are: - regular smtp without authentication, this is relaying to a smarthost. - submission with authentication, e.g. to a third party email sending service. - direct delivery, but with with connections going through a socks proxy. this can be helpful if your ip is blocked, you need to get email out, and you have another IP that isn't blocked. keep in mind that for all of the above, appropriate SPF/DKIM settings have to be configured. the "dnscheck" for a domain does a check for any SOCKS IP in the SPF record. SPF for smtp/submission (ranges? includes?) and any DKIM requirements cannot really be checked. which transport is used can be configured through routes. routes can be set on an account, a domain, or globally. the routes are evaluated in that order, with the first match selecting the transport. these routes are evaluated for each delivery attempt. common selection criteria are recipient domain and sender domain, but also which delivery attempt this is. you could configured mox to attempt sending through a 3rd party from the 4th attempt onwards. routes and transports are optional. if no route matches, or an empty/zero transport is selected, normal direct delivery is done. we could already "submit" emails with 3rd party accounts with "sendmail". but we now support more SASL authentication mechanisms with SMTP (not only PLAIN, but also SCRAM-SHA-256, SCRAM-SHA-1 and CRAM-MD5), which sendmail now also supports. sendmail will use the most secure mechanism supported by the server, or the explicitly configured mechanism. for issue #36 by dmikushin. also based on earlier discussion on hackernews.
2023-06-16 19:38:28 +03:00
"github.com/mjl-/mox/sasl"
2023-01-30 16:27:06 +03:00
"github.com/mjl-/mox/smtpclient"
)
func tcheck(t *testing.T, err error, errmsg string) {
2023-01-30 16:27:06 +03:00
if err != nil {
t.Helper()
t.Fatalf("%s: %s", errmsg, err)
2023-01-30 16:27:06 +03:00
}
}
func TestDeliver(t *testing.T) {
xlog := mlog.New("integration")
2023-01-30 16:27:06 +03:00
mlog.Logfmt = true
hostname, err := os.Hostname()
tcheck(t, err, "hostname")
ourHostname, err := dns.ParseDomain(hostname)
tcheck(t, err, "parse hostname")
2023-01-30 16:27:06 +03:00
// Single update from IMAP IDLE.
type idleResponse struct {
untagged imapclient.Untagged
err error
2023-01-30 16:27:06 +03:00
}
// Deliver submits a message over submissions, and checks with imap idle if the
// message is received by the destination mail server.
deliver := func(checkTime bool, dialtls bool, imaphost, imapuser, imappassword string, send func()) {
2023-01-30 16:27:06 +03:00
t.Helper()
// Connect to IMAP, execute IDLE command, which will return on deliver message.
// TLS certificates work because the container has the CA certificates configured.
var imapconn net.Conn
var err error
if dialtls {
imapconn, err = tls.Dial("tcp", imaphost, nil)
} else {
imapconn, err = net.Dial("tcp", imaphost)
}
tcheck(t, err, "dial imap")
defer imapconn.Close()
imapc, err := imapclient.New(imapconn, false)
tcheck(t, err, "new imapclient")
_, _, err = imapc.Login(imapuser, imappassword)
tcheck(t, err, "imap login")
_, _, err = imapc.Select("Inbox")
tcheck(t, err, "imap select inbox")
err = imapc.Commandf("", "idle")
tcheck(t, err, "write imap idle command")
_, _, _, err = imapc.ReadContinuation()
tcheck(t, err, "read imap continuation")
idle := make(chan idleResponse)
go func() {
for {
untagged, err := imapc.ReadUntagged()
idle <- idleResponse{untagged, err}
if err != nil {
return
}
2023-01-30 16:27:06 +03:00
}
}()
defer func() {
err := imapc.Writelinef("done")
tcheck(t, err, "aborting idle")
}()
2023-01-30 16:27:06 +03:00
t0 := time.Now()
send()
// Wait for notification of delivery.
select {
case resp := <-idle:
tcheck(t, resp.err, "idle notification")
_, ok := resp.untagged.(imapclient.UntaggedExists)
if !ok {
t.Fatalf("got idle %#v, expected untagged exists", resp.untagged)
}
if d := time.Since(t0); checkTime && d < 1*time.Second {
t.Fatalf("delivery took %v, but should have taken at least 1 second, the first-time sender delay", d)
}
case <-time.After(30 * time.Second):
t.Fatalf("timeout after 5s waiting for IMAP IDLE notification of new message, should take about 1 second")
}
}
submit := func(dialtls bool, mailfrom, password, desthost, rcptto string) {
var conn net.Conn
var err error
if dialtls {
conn, err = tls.Dial("tcp", desthost, nil)
} else {
conn, err = net.Dial("tcp", desthost)
}
2023-01-30 16:27:06 +03:00
tcheck(t, err, "dial submission")
defer conn.Close()
msg := fmt.Sprintf(`From: <%s>
To: <%s>
Subject: test message
This is the message.
`, mailfrom, rcptto)
msg = strings.ReplaceAll(msg, "\n", "\r\n")
new feature: when delivering messages from the queue, make it possible to use a "transport" the default transport is still just "direct delivery", where we connect to the destination domain's MX servers. other transports are: - regular smtp without authentication, this is relaying to a smarthost. - submission with authentication, e.g. to a third party email sending service. - direct delivery, but with with connections going through a socks proxy. this can be helpful if your ip is blocked, you need to get email out, and you have another IP that isn't blocked. keep in mind that for all of the above, appropriate SPF/DKIM settings have to be configured. the "dnscheck" for a domain does a check for any SOCKS IP in the SPF record. SPF for smtp/submission (ranges? includes?) and any DKIM requirements cannot really be checked. which transport is used can be configured through routes. routes can be set on an account, a domain, or globally. the routes are evaluated in that order, with the first match selecting the transport. these routes are evaluated for each delivery attempt. common selection criteria are recipient domain and sender domain, but also which delivery attempt this is. you could configured mox to attempt sending through a 3rd party from the 4th attempt onwards. routes and transports are optional. if no route matches, or an empty/zero transport is selected, normal direct delivery is done. we could already "submit" emails with 3rd party accounts with "sendmail". but we now support more SASL authentication mechanisms with SMTP (not only PLAIN, but also SCRAM-SHA-256, SCRAM-SHA-1 and CRAM-MD5), which sendmail now also supports. sendmail will use the most secure mechanism supported by the server, or the explicitly configured mechanism. for issue #36 by dmikushin. also based on earlier discussion on hackernews.
2023-06-16 19:38:28 +03:00
auth := []sasl.Client{sasl.NewClientPlain(mailfrom, password)}
c, err := smtpclient.New(mox.Context, xlog, conn, smtpclient.TLSSkip, ourHostname, dns.Domain{ASCII: desthost}, auth)
2023-01-30 16:27:06 +03:00
tcheck(t, err, "smtp hello")
err = c.Deliver(mox.Context, mailfrom, rcptto, int64(len(msg)), strings.NewReader(msg), false, false)
tcheck(t, err, "deliver with smtp")
err = c.Close()
tcheck(t, err, "close smtpclient")
}
// Make sure moxacmepebble has a TLS certificate.
conn, err := tls.Dial("tcp", "moxacmepebble.mox1.example:465", nil)
tcheck(t, err, "dial submission")
defer conn.Close()
xlog.Print("submitting email to moxacmepebble, waiting for imap notification at moxmail2")
t0 := time.Now()
deliver(true, true, "moxmail2.mox2.example:993", "moxtest2@mox2.example", "accountpass4321", func() {
submit(true, "moxtest1@mox1.example", "accountpass1234", "moxacmepebble.mox1.example:465", "moxtest2@mox2.example")
})
xlog.Print("success", mlog.Field("duration", time.Since(t0)))
xlog.Print("submitting email to moxmail2, waiting for imap notification at moxacmepebble")
t0 = time.Now()
deliver(true, true, "moxacmepebble.mox1.example:993", "moxtest1@mox1.example", "accountpass1234", func() {
submit(true, "moxtest2@mox2.example", "accountpass4321", "moxmail2.mox2.example:465", "moxtest1@mox1.example")
})
xlog.Print("success", mlog.Field("duration", time.Since(t0)))
xlog.Print("submitting email to postfix, waiting for imap notification at moxacmepebble")
t0 = time.Now()
deliver(true, true, "moxacmepebble.mox1.example:993", "moxtest1@mox1.example", "accountpass1234", func() {
submit(true, "moxtest1@mox1.example", "accountpass1234", "moxacmepebble.mox1.example:465", "root@postfix.example")
})
xlog.Print("success", mlog.Field("duration", time.Since(t0)))
xlog.Print("submitting email to localserve")
t0 = time.Now()
deliver(false, false, "localserve.mox1.example:1143", "mox@localhost", "moxmoxmox", func() {
submit(false, "mox@localhost", "moxmoxmox", "localserve.mox1.example:1587", "moxtest1@mox1.example")
})
xlog.Print("success", mlog.Field("duration", time.Since(t0)))
xlog.Print("submitting email to localserve")
t0 = time.Now()
deliver(false, false, "localserve.mox1.example:1143", "mox@localhost", "moxmoxmox", func() {
cmd := exec.Command("go", "run", ".", "sendmail", "mox@localhost")
const msg = `Subject: test
a message.
`
cmd.Stdin = strings.NewReader(msg)
var out strings.Builder
cmd.Stdout = &out
err := cmd.Run()
xlog.Print("sendmail", mlog.Field("output", out.String()))
tcheck(t, err, "sendmail")
})
xlog.Print("success", mlog.Field("duration", time.Since(t0)))
2023-01-30 16:27:06 +03:00
}