2023-01-30 16:27:06 +03:00
// Package mtastsdb stores MTA-STS policies for later use.
//
// An MTA-STS policy can specify how long it may be cached. By storing a
// policy, it does not have to be fetched again during email delivery, which
// makes it harder for attackers to intervene.
package mtastsdb
import (
"context"
implement outgoing tls reports
we were already accepting, processing and displaying incoming tls reports. now
we start tracking TLS connection and security-policy-related errors for
outgoing message deliveries as well. we send reports once a day, to the
reporting addresses specified in TLSRPT records (rua) of a policy domain. these
reports are about MTA-STS policies and/or DANE policies, and about
STARTTLS-related failures.
sending reports is enabled by default, but can be disabled through setting
NoOutgoingTLSReports in mox.conf.
only at the end of the implementation process came the realization that the
TLSRPT policy domain for DANE (MX) hosts are separate from the TLSRPT policy
for the recipient domain, and that MTA-STS and DANE TLS/policy results are
typically delivered in separate reports. so MX hosts need their own TLSRPT
policies.
config for the per-host TLSRPT policy should be added to mox.conf for existing
installs, in field HostTLSRPT. it is automatically configured by quickstart for
new installs. with a HostTLSRPT config, the "dns records" and "dns check" admin
pages now suggest the per-host TLSRPT record. by creating that record, you're
requesting TLS reports about your MX host.
gathering all the TLS/policy results is somewhat tricky. the tentacles go
throughout the code. the positive result is that the TLS/policy-related code
had to be cleaned up a bit. for example, the smtpclient TLS modes now reflect
reality better, with independent settings about whether PKIX and/or DANE
verification has to be done, and/or whether verification errors have to be
ignored (e.g. for tls-required: no header). also, cached mtasts policies of
mode "none" are now cleaned up once the MTA-STS DNS record goes away.
2023-11-09 19:40:46 +03:00
"crypto/tls"
2023-01-30 16:27:06 +03:00
"errors"
"fmt"
"os"
"path/filepath"
implement outgoing tls reports
we were already accepting, processing and displaying incoming tls reports. now
we start tracking TLS connection and security-policy-related errors for
outgoing message deliveries as well. we send reports once a day, to the
reporting addresses specified in TLSRPT records (rua) of a policy domain. these
reports are about MTA-STS policies and/or DANE policies, and about
STARTTLS-related failures.
sending reports is enabled by default, but can be disabled through setting
NoOutgoingTLSReports in mox.conf.
only at the end of the implementation process came the realization that the
TLSRPT policy domain for DANE (MX) hosts are separate from the TLSRPT policy
for the recipient domain, and that MTA-STS and DANE TLS/policy results are
typically delivered in separate reports. so MX hosts need their own TLSRPT
policies.
config for the per-host TLSRPT policy should be added to mox.conf for existing
installs, in field HostTLSRPT. it is automatically configured by quickstart for
new installs. with a HostTLSRPT config, the "dns records" and "dns check" admin
pages now suggest the per-host TLSRPT record. by creating that record, you're
requesting TLS reports about your MX host.
gathering all the TLS/policy results is somewhat tricky. the tentacles go
throughout the code. the positive result is that the TLS/policy-related code
had to be cleaned up a bit. for example, the smtpclient TLS modes now reflect
reality better, with independent settings about whether PKIX and/or DANE
verification has to be done, and/or whether verification errors have to be
ignored (e.g. for tls-required: no header). also, cached mtasts policies of
mode "none" are now cleaned up once the MTA-STS DNS record goes away.
2023-11-09 19:40:46 +03:00
"strings"
2023-01-30 16:27:06 +03:00
"sync"
"time"
"github.com/prometheus/client_golang/prometheus"
"github.com/prometheus/client_golang/prometheus/promauto"
"github.com/mjl-/bstore"
"github.com/mjl-/mox/dns"
"github.com/mjl-/mox/mlog"
"github.com/mjl-/mox/mox-"
"github.com/mjl-/mox/mtasts"
implement outgoing tls reports
we were already accepting, processing and displaying incoming tls reports. now
we start tracking TLS connection and security-policy-related errors for
outgoing message deliveries as well. we send reports once a day, to the
reporting addresses specified in TLSRPT records (rua) of a policy domain. these
reports are about MTA-STS policies and/or DANE policies, and about
STARTTLS-related failures.
sending reports is enabled by default, but can be disabled through setting
NoOutgoingTLSReports in mox.conf.
only at the end of the implementation process came the realization that the
TLSRPT policy domain for DANE (MX) hosts are separate from the TLSRPT policy
for the recipient domain, and that MTA-STS and DANE TLS/policy results are
typically delivered in separate reports. so MX hosts need their own TLSRPT
policies.
config for the per-host TLSRPT policy should be added to mox.conf for existing
installs, in field HostTLSRPT. it is automatically configured by quickstart for
new installs. with a HostTLSRPT config, the "dns records" and "dns check" admin
pages now suggest the per-host TLSRPT record. by creating that record, you're
requesting TLS reports about your MX host.
gathering all the TLS/policy results is somewhat tricky. the tentacles go
throughout the code. the positive result is that the TLS/policy-related code
had to be cleaned up a bit. for example, the smtpclient TLS modes now reflect
reality better, with independent settings about whether PKIX and/or DANE
verification has to be done, and/or whether verification errors have to be
ignored (e.g. for tls-required: no header). also, cached mtasts policies of
mode "none" are now cleaned up once the MTA-STS DNS record goes away.
2023-11-09 19:40:46 +03:00
"github.com/mjl-/mox/tlsrpt"
2023-01-30 16:27:06 +03:00
)
var xlog = mlog . New ( "mtastsdb" )
var (
metricGet = promauto . NewCounterVec (
prometheus . CounterOpts {
Name : "mox_mtastsdb_get_total" ,
Help : "Number of Get by result." ,
} ,
[ ] string { "result" } ,
)
)
var timeNow = time . Now // Tests override this.
// PolicyRecord is a cached policy or absence of a policy.
type PolicyRecord struct {
Domain string // Domain name, with unicode characters.
Inserted time . Time ` bstore:"default now" `
ValidEnd time . Time
LastUpdate time . Time // Policies are refreshed on use and periodically.
LastUse time . Time ` bstore:"index" `
Backoff bool
RecordID string // As retrieved from DNS.
mtasts . Policy // As retrieved from the well-known HTTPS url.
implement outgoing tls reports
we were already accepting, processing and displaying incoming tls reports. now
we start tracking TLS connection and security-policy-related errors for
outgoing message deliveries as well. we send reports once a day, to the
reporting addresses specified in TLSRPT records (rua) of a policy domain. these
reports are about MTA-STS policies and/or DANE policies, and about
STARTTLS-related failures.
sending reports is enabled by default, but can be disabled through setting
NoOutgoingTLSReports in mox.conf.
only at the end of the implementation process came the realization that the
TLSRPT policy domain for DANE (MX) hosts are separate from the TLSRPT policy
for the recipient domain, and that MTA-STS and DANE TLS/policy results are
typically delivered in separate reports. so MX hosts need their own TLSRPT
policies.
config for the per-host TLSRPT policy should be added to mox.conf for existing
installs, in field HostTLSRPT. it is automatically configured by quickstart for
new installs. with a HostTLSRPT config, the "dns records" and "dns check" admin
pages now suggest the per-host TLSRPT record. by creating that record, you're
requesting TLS reports about your MX host.
gathering all the TLS/policy results is somewhat tricky. the tentacles go
throughout the code. the positive result is that the TLS/policy-related code
had to be cleaned up a bit. for example, the smtpclient TLS modes now reflect
reality better, with independent settings about whether PKIX and/or DANE
verification has to be done, and/or whether verification errors have to be
ignored (e.g. for tls-required: no header). also, cached mtasts policies of
mode "none" are now cleaned up once the MTA-STS DNS record goes away.
2023-11-09 19:40:46 +03:00
// Text that make up the policy, as retrieved. We didn't store this in the past. If
// empty, policy can be reconstructed from Policy field. Needed by TLSRPT.
PolicyText string
2023-01-30 16:27:06 +03:00
}
var (
// No valid non-expired policy in database.
ErrNotFound = errors . New ( "mtastsdb: policy not found" )
// Indicates an MTA-STS TXT record was fetched recently, but fetching the policy
// failed and should not yet be retried.
ErrBackoff = errors . New ( "mtastsdb: policy fetch failed recently" )
)
add a "backup" subcommand to make consistent backups, and a "verifydata" subcommand to verify a backup before restoring, and add tests for future upgrades
the backup command will make consistent snapshots of all the database files. i
had been copying the db files before, and it usually works. but if the file is
modified during the backup, it is inconsistent and is likely to generate errors
when reading (can be at any moment in the future, when reading some db page).
"mox backup" opens the database file and writes out a copy in a transaction.
it also duplicates the message files.
before doing a restore, you could run "mox verifydata" on the to-be-restored
"data" directory. it check the database files, and compares the message files
with the database.
the new "gentestdata" subcommand generates a basic "data" directory, with a
queue and a few accounts. we will use it in the future along with "verifydata"
to test upgrades from old version to the latest version. both when going to the
next version, and when skipping several versions. the script test-upgrades.sh
executes these tests and doesn't do anything at the moment, because no releases
have this subcommand yet.
inspired by a failed upgrade attempt of a pre-release version.
2023-05-26 20:26:51 +03:00
var DBTypes = [ ] any { PolicyRecord { } } // Types stored in DB.
var DB * bstore . DB // Exported for backups.
2023-01-30 16:27:06 +03:00
var mutex sync . Mutex
2023-05-22 15:40:36 +03:00
func database ( ctx context . Context ) ( rdb * bstore . DB , rerr error ) {
2023-01-30 16:27:06 +03:00
mutex . Lock ( )
defer mutex . Unlock ( )
add a "backup" subcommand to make consistent backups, and a "verifydata" subcommand to verify a backup before restoring, and add tests for future upgrades
the backup command will make consistent snapshots of all the database files. i
had been copying the db files before, and it usually works. but if the file is
modified during the backup, it is inconsistent and is likely to generate errors
when reading (can be at any moment in the future, when reading some db page).
"mox backup" opens the database file and writes out a copy in a transaction.
it also duplicates the message files.
before doing a restore, you could run "mox verifydata" on the to-be-restored
"data" directory. it check the database files, and compares the message files
with the database.
the new "gentestdata" subcommand generates a basic "data" directory, with a
queue and a few accounts. we will use it in the future along with "verifydata"
to test upgrades from old version to the latest version. both when going to the
next version, and when skipping several versions. the script test-upgrades.sh
executes these tests and doesn't do anything at the moment, because no releases
have this subcommand yet.
inspired by a failed upgrade attempt of a pre-release version.
2023-05-26 20:26:51 +03:00
if DB == nil {
2023-01-30 16:27:06 +03:00
p := mox . DataDirPath ( "mtasts.db" )
os . MkdirAll ( filepath . Dir ( p ) , 0770 )
add a "backup" subcommand to make consistent backups, and a "verifydata" subcommand to verify a backup before restoring, and add tests for future upgrades
the backup command will make consistent snapshots of all the database files. i
had been copying the db files before, and it usually works. but if the file is
modified during the backup, it is inconsistent and is likely to generate errors
when reading (can be at any moment in the future, when reading some db page).
"mox backup" opens the database file and writes out a copy in a transaction.
it also duplicates the message files.
before doing a restore, you could run "mox verifydata" on the to-be-restored
"data" directory. it check the database files, and compares the message files
with the database.
the new "gentestdata" subcommand generates a basic "data" directory, with a
queue and a few accounts. we will use it in the future along with "verifydata"
to test upgrades from old version to the latest version. both when going to the
next version, and when skipping several versions. the script test-upgrades.sh
executes these tests and doesn't do anything at the moment, because no releases
have this subcommand yet.
inspired by a failed upgrade attempt of a pre-release version.
2023-05-26 20:26:51 +03:00
db , err := bstore . Open ( ctx , p , & bstore . Options { Timeout : 5 * time . Second , Perm : 0660 } , DBTypes ... )
2023-01-30 16:27:06 +03:00
if err != nil {
return nil , err
}
add a "backup" subcommand to make consistent backups, and a "verifydata" subcommand to verify a backup before restoring, and add tests for future upgrades
the backup command will make consistent snapshots of all the database files. i
had been copying the db files before, and it usually works. but if the file is
modified during the backup, it is inconsistent and is likely to generate errors
when reading (can be at any moment in the future, when reading some db page).
"mox backup" opens the database file and writes out a copy in a transaction.
it also duplicates the message files.
before doing a restore, you could run "mox verifydata" on the to-be-restored
"data" directory. it check the database files, and compares the message files
with the database.
the new "gentestdata" subcommand generates a basic "data" directory, with a
queue and a few accounts. we will use it in the future along with "verifydata"
to test upgrades from old version to the latest version. both when going to the
next version, and when skipping several versions. the script test-upgrades.sh
executes these tests and doesn't do anything at the moment, because no releases
have this subcommand yet.
inspired by a failed upgrade attempt of a pre-release version.
2023-05-26 20:26:51 +03:00
DB = db
2023-01-30 16:27:06 +03:00
}
add a "backup" subcommand to make consistent backups, and a "verifydata" subcommand to verify a backup before restoring, and add tests for future upgrades
the backup command will make consistent snapshots of all the database files. i
had been copying the db files before, and it usually works. but if the file is
modified during the backup, it is inconsistent and is likely to generate errors
when reading (can be at any moment in the future, when reading some db page).
"mox backup" opens the database file and writes out a copy in a transaction.
it also duplicates the message files.
before doing a restore, you could run "mox verifydata" on the to-be-restored
"data" directory. it check the database files, and compares the message files
with the database.
the new "gentestdata" subcommand generates a basic "data" directory, with a
queue and a few accounts. we will use it in the future along with "verifydata"
to test upgrades from old version to the latest version. both when going to the
next version, and when skipping several versions. the script test-upgrades.sh
executes these tests and doesn't do anything at the moment, because no releases
have this subcommand yet.
inspired by a failed upgrade attempt of a pre-release version.
2023-05-26 20:26:51 +03:00
return DB , nil
2023-01-30 16:27:06 +03:00
}
// Init opens the database and starts a goroutine that refreshes policies in
// the database, and keeps doing so periodically.
func Init ( refresher bool ) error {
2023-05-22 15:40:36 +03:00
_ , err := database ( mox . Shutdown )
2023-01-30 16:27:06 +03:00
if err != nil {
return err
}
if refresher {
// todo: allow us to shut down cleanly?
go refresh ( )
}
return nil
}
// Close closes the database.
func Close ( ) {
mutex . Lock ( )
defer mutex . Unlock ( )
add a "backup" subcommand to make consistent backups, and a "verifydata" subcommand to verify a backup before restoring, and add tests for future upgrades
the backup command will make consistent snapshots of all the database files. i
had been copying the db files before, and it usually works. but if the file is
modified during the backup, it is inconsistent and is likely to generate errors
when reading (can be at any moment in the future, when reading some db page).
"mox backup" opens the database file and writes out a copy in a transaction.
it also duplicates the message files.
before doing a restore, you could run "mox verifydata" on the to-be-restored
"data" directory. it check the database files, and compares the message files
with the database.
the new "gentestdata" subcommand generates a basic "data" directory, with a
queue and a few accounts. we will use it in the future along with "verifydata"
to test upgrades from old version to the latest version. both when going to the
next version, and when skipping several versions. the script test-upgrades.sh
executes these tests and doesn't do anything at the moment, because no releases
have this subcommand yet.
inspired by a failed upgrade attempt of a pre-release version.
2023-05-26 20:26:51 +03:00
if DB != nil {
err := DB . Close ( )
2023-02-16 15:22:00 +03:00
xlog . Check ( err , "closing database" )
add a "backup" subcommand to make consistent backups, and a "verifydata" subcommand to verify a backup before restoring, and add tests for future upgrades
the backup command will make consistent snapshots of all the database files. i
had been copying the db files before, and it usually works. but if the file is
modified during the backup, it is inconsistent and is likely to generate errors
when reading (can be at any moment in the future, when reading some db page).
"mox backup" opens the database file and writes out a copy in a transaction.
it also duplicates the message files.
before doing a restore, you could run "mox verifydata" on the to-be-restored
"data" directory. it check the database files, and compares the message files
with the database.
the new "gentestdata" subcommand generates a basic "data" directory, with a
queue and a few accounts. we will use it in the future along with "verifydata"
to test upgrades from old version to the latest version. both when going to the
next version, and when skipping several versions. the script test-upgrades.sh
executes these tests and doesn't do anything at the moment, because no releases
have this subcommand yet.
inspired by a failed upgrade attempt of a pre-release version.
2023-05-26 20:26:51 +03:00
DB = nil
2023-01-30 16:27:06 +03:00
}
}
2023-10-15 16:05:20 +03:00
// lookup looks up a policy for the domain in the database.
2023-01-30 16:27:06 +03:00
//
// Only non-expired records are returned.
2023-10-15 16:05:20 +03:00
//
// Returns ErrNotFound if record is not present.
// Returns ErrBackoff if a recent attempt to fetch a record failed.
2023-01-30 16:27:06 +03:00
func lookup ( ctx context . Context , domain dns . Domain ) ( * PolicyRecord , error ) {
log := xlog . WithContext ( ctx )
2023-05-22 15:40:36 +03:00
db , err := database ( ctx )
2023-01-30 16:27:06 +03:00
if err != nil {
return nil , err
}
if domain . IsZero ( ) {
return nil , fmt . Errorf ( "empty domain" )
}
now := timeNow ( )
2023-05-22 15:40:36 +03:00
q := bstore . QueryDB [ PolicyRecord ] ( ctx , db )
2023-01-30 16:27:06 +03:00
q . FilterNonzero ( PolicyRecord { Domain : domain . Name ( ) } )
q . FilterGreater ( "ValidEnd" , now )
pr , err := q . Get ( )
if err == bstore . ErrAbsent {
return nil , ErrNotFound
} else if err != nil {
return nil , err
}
pr . LastUse = now
2023-05-22 15:40:36 +03:00
if err := db . Update ( ctx , & pr ) ; err != nil {
2023-01-30 16:27:06 +03:00
log . Errorx ( "marking cached mta-sts policy as used in database" , err )
}
if pr . Backoff {
return nil , ErrBackoff
}
return & pr , nil
}
// Upsert adds the policy to the database, overwriting an existing policy for the domain.
// Policy can be nil, indicating a failure to fetch the policy.
implement outgoing tls reports
we were already accepting, processing and displaying incoming tls reports. now
we start tracking TLS connection and security-policy-related errors for
outgoing message deliveries as well. we send reports once a day, to the
reporting addresses specified in TLSRPT records (rua) of a policy domain. these
reports are about MTA-STS policies and/or DANE policies, and about
STARTTLS-related failures.
sending reports is enabled by default, but can be disabled through setting
NoOutgoingTLSReports in mox.conf.
only at the end of the implementation process came the realization that the
TLSRPT policy domain for DANE (MX) hosts are separate from the TLSRPT policy
for the recipient domain, and that MTA-STS and DANE TLS/policy results are
typically delivered in separate reports. so MX hosts need their own TLSRPT
policies.
config for the per-host TLSRPT policy should be added to mox.conf for existing
installs, in field HostTLSRPT. it is automatically configured by quickstart for
new installs. with a HostTLSRPT config, the "dns records" and "dns check" admin
pages now suggest the per-host TLSRPT record. by creating that record, you're
requesting TLS reports about your MX host.
gathering all the TLS/policy results is somewhat tricky. the tentacles go
throughout the code. the positive result is that the TLS/policy-related code
had to be cleaned up a bit. for example, the smtpclient TLS modes now reflect
reality better, with independent settings about whether PKIX and/or DANE
verification has to be done, and/or whether verification errors have to be
ignored (e.g. for tls-required: no header). also, cached mtasts policies of
mode "none" are now cleaned up once the MTA-STS DNS record goes away.
2023-11-09 19:40:46 +03:00
func Upsert ( ctx context . Context , domain dns . Domain , recordID string , policy * mtasts . Policy , policyText string ) error {
2023-05-22 15:40:36 +03:00
db , err := database ( ctx )
2023-01-30 16:27:06 +03:00
if err != nil {
return err
}
2023-05-22 15:40:36 +03:00
return db . Write ( ctx , func ( tx * bstore . Tx ) error {
2023-01-30 16:27:06 +03:00
pr := PolicyRecord { Domain : domain . Name ( ) }
err := tx . Get ( & pr )
if err != nil && err != bstore . ErrAbsent {
return err
}
now := timeNow ( )
var p mtasts . Policy
if policy != nil {
p = * policy
} else {
// ../rfc/8461:552
p . Mode = mtasts . ModeNone
p . MaxAgeSeconds = 5 * 60
}
backoff := policy == nil
validEnd := now . Add ( time . Duration ( p . MaxAgeSeconds ) * time . Second )
if err == bstore . ErrAbsent {
implement outgoing tls reports
we were already accepting, processing and displaying incoming tls reports. now
we start tracking TLS connection and security-policy-related errors for
outgoing message deliveries as well. we send reports once a day, to the
reporting addresses specified in TLSRPT records (rua) of a policy domain. these
reports are about MTA-STS policies and/or DANE policies, and about
STARTTLS-related failures.
sending reports is enabled by default, but can be disabled through setting
NoOutgoingTLSReports in mox.conf.
only at the end of the implementation process came the realization that the
TLSRPT policy domain for DANE (MX) hosts are separate from the TLSRPT policy
for the recipient domain, and that MTA-STS and DANE TLS/policy results are
typically delivered in separate reports. so MX hosts need their own TLSRPT
policies.
config for the per-host TLSRPT policy should be added to mox.conf for existing
installs, in field HostTLSRPT. it is automatically configured by quickstart for
new installs. with a HostTLSRPT config, the "dns records" and "dns check" admin
pages now suggest the per-host TLSRPT record. by creating that record, you're
requesting TLS reports about your MX host.
gathering all the TLS/policy results is somewhat tricky. the tentacles go
throughout the code. the positive result is that the TLS/policy-related code
had to be cleaned up a bit. for example, the smtpclient TLS modes now reflect
reality better, with independent settings about whether PKIX and/or DANE
verification has to be done, and/or whether verification errors have to be
ignored (e.g. for tls-required: no header). also, cached mtasts policies of
mode "none" are now cleaned up once the MTA-STS DNS record goes away.
2023-11-09 19:40:46 +03:00
pr = PolicyRecord { domain . Name ( ) , now , validEnd , now , now , backoff , recordID , p , policyText }
2023-01-30 16:27:06 +03:00
return tx . Insert ( & pr )
}
pr . ValidEnd = validEnd
pr . LastUpdate = now
pr . LastUse = now
pr . Backoff = backoff
pr . RecordID = recordID
pr . Policy = p
implement outgoing tls reports
we were already accepting, processing and displaying incoming tls reports. now
we start tracking TLS connection and security-policy-related errors for
outgoing message deliveries as well. we send reports once a day, to the
reporting addresses specified in TLSRPT records (rua) of a policy domain. these
reports are about MTA-STS policies and/or DANE policies, and about
STARTTLS-related failures.
sending reports is enabled by default, but can be disabled through setting
NoOutgoingTLSReports in mox.conf.
only at the end of the implementation process came the realization that the
TLSRPT policy domain for DANE (MX) hosts are separate from the TLSRPT policy
for the recipient domain, and that MTA-STS and DANE TLS/policy results are
typically delivered in separate reports. so MX hosts need their own TLSRPT
policies.
config for the per-host TLSRPT policy should be added to mox.conf for existing
installs, in field HostTLSRPT. it is automatically configured by quickstart for
new installs. with a HostTLSRPT config, the "dns records" and "dns check" admin
pages now suggest the per-host TLSRPT record. by creating that record, you're
requesting TLS reports about your MX host.
gathering all the TLS/policy results is somewhat tricky. the tentacles go
throughout the code. the positive result is that the TLS/policy-related code
had to be cleaned up a bit. for example, the smtpclient TLS modes now reflect
reality better, with independent settings about whether PKIX and/or DANE
verification has to be done, and/or whether verification errors have to be
ignored (e.g. for tls-required: no header). also, cached mtasts policies of
mode "none" are now cleaned up once the MTA-STS DNS record goes away.
2023-11-09 19:40:46 +03:00
pr . PolicyText = policyText
2023-01-30 16:27:06 +03:00
return tx . Update ( & pr )
} )
}
// PolicyRecords returns all policies in the database, sorted descending by last
// use, domain.
func PolicyRecords ( ctx context . Context ) ( [ ] PolicyRecord , error ) {
2023-05-22 15:40:36 +03:00
db , err := database ( ctx )
2023-01-30 16:27:06 +03:00
if err != nil {
return nil , err
}
2023-05-22 15:40:36 +03:00
return bstore . QueryDB [ PolicyRecord ] ( ctx , db ) . SortDesc ( "LastUse" , "Domain" ) . List ( )
2023-01-30 16:27:06 +03:00
}
// Get retrieves an MTA-STS policy for domain and whether it is fresh.
//
// If an error is returned, it should be considered a transient error, e.g. a
// temporary DNS lookup failure.
//
// The returned policy can be nil also when there is no error. In this case, the
// domain does not implement MTA-STS.
//
// If a policy is present in the local database, it is refreshed if needed. If no
// policy is present for the domain, an attempt is made to fetch the policy and
// store it in the local database.
//
// Some errors are logged but not otherwise returned, e.g. if a new policy is
// supposedly published but could not be retrieved.
implement outgoing tls reports
we were already accepting, processing and displaying incoming tls reports. now
we start tracking TLS connection and security-policy-related errors for
outgoing message deliveries as well. we send reports once a day, to the
reporting addresses specified in TLSRPT records (rua) of a policy domain. these
reports are about MTA-STS policies and/or DANE policies, and about
STARTTLS-related failures.
sending reports is enabled by default, but can be disabled through setting
NoOutgoingTLSReports in mox.conf.
only at the end of the implementation process came the realization that the
TLSRPT policy domain for DANE (MX) hosts are separate from the TLSRPT policy
for the recipient domain, and that MTA-STS and DANE TLS/policy results are
typically delivered in separate reports. so MX hosts need their own TLSRPT
policies.
config for the per-host TLSRPT policy should be added to mox.conf for existing
installs, in field HostTLSRPT. it is automatically configured by quickstart for
new installs. with a HostTLSRPT config, the "dns records" and "dns check" admin
pages now suggest the per-host TLSRPT record. by creating that record, you're
requesting TLS reports about your MX host.
gathering all the TLS/policy results is somewhat tricky. the tentacles go
throughout the code. the positive result is that the TLS/policy-related code
had to be cleaned up a bit. for example, the smtpclient TLS modes now reflect
reality better, with independent settings about whether PKIX and/or DANE
verification has to be done, and/or whether verification errors have to be
ignored (e.g. for tls-required: no header). also, cached mtasts policies of
mode "none" are now cleaned up once the MTA-STS DNS record goes away.
2023-11-09 19:40:46 +03:00
//
// Get returns an "sts" or "no-policy-found" in reportResult in most cases (when
// not a local/internal error). It may add an "sts" result without policy contents
// ("policy-string") in case of errors while fetching the policy.
func Get ( ctx context . Context , resolver dns . Resolver , domain dns . Domain ) ( policy * mtasts . Policy , reportResult tlsrpt . Result , fresh bool , err error ) {
2023-01-30 16:27:06 +03:00
log := xlog . WithContext ( ctx )
defer func ( ) {
result := "ok"
if err != nil && errors . Is ( err , ErrBackoff ) {
result = "backoff"
} else if err != nil && errors . Is ( err , ErrNotFound ) {
result = "notfound"
} else if err != nil {
result = "error"
}
metricGet . WithLabelValues ( result ) . Inc ( )
log . Debugx ( "mtastsdb get result" , err , mlog . Field ( "domain" , domain ) , mlog . Field ( "fresh" , fresh ) )
} ( )
cachedPolicy , err := lookup ( ctx , domain )
if err != nil && errors . Is ( err , ErrNotFound ) {
// We don't have a policy for this domain, not even a record that we tried recently
// and should backoff. So attempt to fetch policy.
nctx , cancel := context . WithTimeout ( ctx , time . Minute )
defer cancel ( )
implement outgoing tls reports
we were already accepting, processing and displaying incoming tls reports. now
we start tracking TLS connection and security-policy-related errors for
outgoing message deliveries as well. we send reports once a day, to the
reporting addresses specified in TLSRPT records (rua) of a policy domain. these
reports are about MTA-STS policies and/or DANE policies, and about
STARTTLS-related failures.
sending reports is enabled by default, but can be disabled through setting
NoOutgoingTLSReports in mox.conf.
only at the end of the implementation process came the realization that the
TLSRPT policy domain for DANE (MX) hosts are separate from the TLSRPT policy
for the recipient domain, and that MTA-STS and DANE TLS/policy results are
typically delivered in separate reports. so MX hosts need their own TLSRPT
policies.
config for the per-host TLSRPT policy should be added to mox.conf for existing
installs, in field HostTLSRPT. it is automatically configured by quickstart for
new installs. with a HostTLSRPT config, the "dns records" and "dns check" admin
pages now suggest the per-host TLSRPT record. by creating that record, you're
requesting TLS reports about your MX host.
gathering all the TLS/policy results is somewhat tricky. the tentacles go
throughout the code. the positive result is that the TLS/policy-related code
had to be cleaned up a bit. for example, the smtpclient TLS modes now reflect
reality better, with independent settings about whether PKIX and/or DANE
verification has to be done, and/or whether verification errors have to be
ignored (e.g. for tls-required: no header). also, cached mtasts policies of
mode "none" are now cleaned up once the MTA-STS DNS record goes away.
2023-11-09 19:40:46 +03:00
record , p , ptext , err := mtasts . Get ( nctx , resolver , domain )
2023-01-30 16:27:06 +03:00
if err != nil {
switch {
case errors . Is ( err , mtasts . ErrNoRecord ) || errors . Is ( err , mtasts . ErrMultipleRecords ) || errors . Is ( err , mtasts . ErrRecordSyntax ) || errors . Is ( err , mtasts . ErrNoPolicy ) || errors . Is ( err , mtasts . ErrPolicyFetch ) || errors . Is ( err , mtasts . ErrPolicySyntax ) :
// Remote is not doing MTA-STS, continue below. ../rfc/8461:333 ../rfc/8461:574
2023-06-04 18:55:55 +03:00
log . Debugx ( "interpreting mtasts error to mean remote is not doing mta-sts" , err )
implement outgoing tls reports
we were already accepting, processing and displaying incoming tls reports. now
we start tracking TLS connection and security-policy-related errors for
outgoing message deliveries as well. we send reports once a day, to the
reporting addresses specified in TLSRPT records (rua) of a policy domain. these
reports are about MTA-STS policies and/or DANE policies, and about
STARTTLS-related failures.
sending reports is enabled by default, but can be disabled through setting
NoOutgoingTLSReports in mox.conf.
only at the end of the implementation process came the realization that the
TLSRPT policy domain for DANE (MX) hosts are separate from the TLSRPT policy
for the recipient domain, and that MTA-STS and DANE TLS/policy results are
typically delivered in separate reports. so MX hosts need their own TLSRPT
policies.
config for the per-host TLSRPT policy should be added to mox.conf for existing
installs, in field HostTLSRPT. it is automatically configured by quickstart for
new installs. with a HostTLSRPT config, the "dns records" and "dns check" admin
pages now suggest the per-host TLSRPT record. by creating that record, you're
requesting TLS reports about your MX host.
gathering all the TLS/policy results is somewhat tricky. the tentacles go
throughout the code. the positive result is that the TLS/policy-related code
had to be cleaned up a bit. for example, the smtpclient TLS modes now reflect
reality better, with independent settings about whether PKIX and/or DANE
verification has to be done, and/or whether verification errors have to be
ignored (e.g. for tls-required: no header). also, cached mtasts policies of
mode "none" are now cleaned up once the MTA-STS DNS record goes away.
2023-11-09 19:40:46 +03:00
if errors . Is ( err , mtasts . ErrNoRecord ) {
reportResult = tlsrpt . MakeResult ( tlsrpt . NoPolicyFound , domain )
} else {
fd := policyFetchFailureDetails ( err )
reportResult = tlsrpt . MakeResult ( tlsrpt . STS , domain , fd )
}
2023-01-30 16:27:06 +03:00
default :
// Interpret as temporary error, e.g. mtasts.ErrDNS, try again later.
implement outgoing tls reports
we were already accepting, processing and displaying incoming tls reports. now
we start tracking TLS connection and security-policy-related errors for
outgoing message deliveries as well. we send reports once a day, to the
reporting addresses specified in TLSRPT records (rua) of a policy domain. these
reports are about MTA-STS policies and/or DANE policies, and about
STARTTLS-related failures.
sending reports is enabled by default, but can be disabled through setting
NoOutgoingTLSReports in mox.conf.
only at the end of the implementation process came the realization that the
TLSRPT policy domain for DANE (MX) hosts are separate from the TLSRPT policy
for the recipient domain, and that MTA-STS and DANE TLS/policy results are
typically delivered in separate reports. so MX hosts need their own TLSRPT
policies.
config for the per-host TLSRPT policy should be added to mox.conf for existing
installs, in field HostTLSRPT. it is automatically configured by quickstart for
new installs. with a HostTLSRPT config, the "dns records" and "dns check" admin
pages now suggest the per-host TLSRPT record. by creating that record, you're
requesting TLS reports about your MX host.
gathering all the TLS/policy results is somewhat tricky. the tentacles go
throughout the code. the positive result is that the TLS/policy-related code
had to be cleaned up a bit. for example, the smtpclient TLS modes now reflect
reality better, with independent settings about whether PKIX and/or DANE
verification has to be done, and/or whether verification errors have to be
ignored (e.g. for tls-required: no header). also, cached mtasts policies of
mode "none" are now cleaned up once the MTA-STS DNS record goes away.
2023-11-09 19:40:46 +03:00
// Temporary DNS error could be an operational issue on our side, but we can still
// report it.
// Result: ../rfc/8460:594
fd := tlsrpt . Details ( tlsrpt . ResultSTSPolicyFetch , mtasts . TLSReportFailureReason ( err ) )
reportResult = tlsrpt . MakeResult ( tlsrpt . STS , domain , fd )
return nil , reportResult , false , fmt . Errorf ( "lookup up mta-sts policy: %w" , err )
2023-01-30 16:27:06 +03:00
}
implement outgoing tls reports
we were already accepting, processing and displaying incoming tls reports. now
we start tracking TLS connection and security-policy-related errors for
outgoing message deliveries as well. we send reports once a day, to the
reporting addresses specified in TLSRPT records (rua) of a policy domain. these
reports are about MTA-STS policies and/or DANE policies, and about
STARTTLS-related failures.
sending reports is enabled by default, but can be disabled through setting
NoOutgoingTLSReports in mox.conf.
only at the end of the implementation process came the realization that the
TLSRPT policy domain for DANE (MX) hosts are separate from the TLSRPT policy
for the recipient domain, and that MTA-STS and DANE TLS/policy results are
typically delivered in separate reports. so MX hosts need their own TLSRPT
policies.
config for the per-host TLSRPT policy should be added to mox.conf for existing
installs, in field HostTLSRPT. it is automatically configured by quickstart for
new installs. with a HostTLSRPT config, the "dns records" and "dns check" admin
pages now suggest the per-host TLSRPT record. by creating that record, you're
requesting TLS reports about your MX host.
gathering all the TLS/policy results is somewhat tricky. the tentacles go
throughout the code. the positive result is that the TLS/policy-related code
had to be cleaned up a bit. for example, the smtpclient TLS modes now reflect
reality better, with independent settings about whether PKIX and/or DANE
verification has to be done, and/or whether verification errors have to be
ignored (e.g. for tls-required: no header). also, cached mtasts policies of
mode "none" are now cleaned up once the MTA-STS DNS record goes away.
2023-11-09 19:40:46 +03:00
} else if p . Mode == mtasts . ModeNone {
reportResult = tlsrpt . MakeResult ( tlsrpt . NoPolicyFound , domain )
} else {
reportResult = tlsrpt . Result { Policy : tlsrptPolicy ( p , ptext , domain ) }
2023-01-30 16:27:06 +03:00
}
implement outgoing tls reports
we were already accepting, processing and displaying incoming tls reports. now
we start tracking TLS connection and security-policy-related errors for
outgoing message deliveries as well. we send reports once a day, to the
reporting addresses specified in TLSRPT records (rua) of a policy domain. these
reports are about MTA-STS policies and/or DANE policies, and about
STARTTLS-related failures.
sending reports is enabled by default, but can be disabled through setting
NoOutgoingTLSReports in mox.conf.
only at the end of the implementation process came the realization that the
TLSRPT policy domain for DANE (MX) hosts are separate from the TLSRPT policy
for the recipient domain, and that MTA-STS and DANE TLS/policy results are
typically delivered in separate reports. so MX hosts need their own TLSRPT
policies.
config for the per-host TLSRPT policy should be added to mox.conf for existing
installs, in field HostTLSRPT. it is automatically configured by quickstart for
new installs. with a HostTLSRPT config, the "dns records" and "dns check" admin
pages now suggest the per-host TLSRPT record. by creating that record, you're
requesting TLS reports about your MX host.
gathering all the TLS/policy results is somewhat tricky. the tentacles go
throughout the code. the positive result is that the TLS/policy-related code
had to be cleaned up a bit. for example, the smtpclient TLS modes now reflect
reality better, with independent settings about whether PKIX and/or DANE
verification has to be done, and/or whether verification errors have to be
ignored (e.g. for tls-required: no header). also, cached mtasts policies of
mode "none" are now cleaned up once the MTA-STS DNS record goes away.
2023-11-09 19:40:46 +03:00
2023-01-30 16:27:06 +03:00
// Insert policy into database. If we could not fetch the policy itself, we back
// off for 5 minutes. ../rfc/8461:555
if err == nil || errors . Is ( err , mtasts . ErrNoPolicy ) || errors . Is ( err , mtasts . ErrPolicyFetch ) || errors . Is ( err , mtasts . ErrPolicySyntax ) {
var recordID string
if record != nil {
recordID = record . ID
}
implement outgoing tls reports
we were already accepting, processing and displaying incoming tls reports. now
we start tracking TLS connection and security-policy-related errors for
outgoing message deliveries as well. we send reports once a day, to the
reporting addresses specified in TLSRPT records (rua) of a policy domain. these
reports are about MTA-STS policies and/or DANE policies, and about
STARTTLS-related failures.
sending reports is enabled by default, but can be disabled through setting
NoOutgoingTLSReports in mox.conf.
only at the end of the implementation process came the realization that the
TLSRPT policy domain for DANE (MX) hosts are separate from the TLSRPT policy
for the recipient domain, and that MTA-STS and DANE TLS/policy results are
typically delivered in separate reports. so MX hosts need their own TLSRPT
policies.
config for the per-host TLSRPT policy should be added to mox.conf for existing
installs, in field HostTLSRPT. it is automatically configured by quickstart for
new installs. with a HostTLSRPT config, the "dns records" and "dns check" admin
pages now suggest the per-host TLSRPT record. by creating that record, you're
requesting TLS reports about your MX host.
gathering all the TLS/policy results is somewhat tricky. the tentacles go
throughout the code. the positive result is that the TLS/policy-related code
had to be cleaned up a bit. for example, the smtpclient TLS modes now reflect
reality better, with independent settings about whether PKIX and/or DANE
verification has to be done, and/or whether verification errors have to be
ignored (e.g. for tls-required: no header). also, cached mtasts policies of
mode "none" are now cleaned up once the MTA-STS DNS record goes away.
2023-11-09 19:40:46 +03:00
if err := Upsert ( ctx , domain , recordID , p , ptext ) ; err != nil {
2023-01-30 16:27:06 +03:00
log . Errorx ( "inserting policy into cache, continuing" , err )
}
}
implement outgoing tls reports
we were already accepting, processing and displaying incoming tls reports. now
we start tracking TLS connection and security-policy-related errors for
outgoing message deliveries as well. we send reports once a day, to the
reporting addresses specified in TLSRPT records (rua) of a policy domain. these
reports are about MTA-STS policies and/or DANE policies, and about
STARTTLS-related failures.
sending reports is enabled by default, but can be disabled through setting
NoOutgoingTLSReports in mox.conf.
only at the end of the implementation process came the realization that the
TLSRPT policy domain for DANE (MX) hosts are separate from the TLSRPT policy
for the recipient domain, and that MTA-STS and DANE TLS/policy results are
typically delivered in separate reports. so MX hosts need their own TLSRPT
policies.
config for the per-host TLSRPT policy should be added to mox.conf for existing
installs, in field HostTLSRPT. it is automatically configured by quickstart for
new installs. with a HostTLSRPT config, the "dns records" and "dns check" admin
pages now suggest the per-host TLSRPT record. by creating that record, you're
requesting TLS reports about your MX host.
gathering all the TLS/policy results is somewhat tricky. the tentacles go
throughout the code. the positive result is that the TLS/policy-related code
had to be cleaned up a bit. for example, the smtpclient TLS modes now reflect
reality better, with independent settings about whether PKIX and/or DANE
verification has to be done, and/or whether verification errors have to be
ignored (e.g. for tls-required: no header). also, cached mtasts policies of
mode "none" are now cleaned up once the MTA-STS DNS record goes away.
2023-11-09 19:40:46 +03:00
return p , reportResult , true , nil
2023-01-30 16:27:06 +03:00
} else if err != nil && errors . Is ( err , ErrBackoff ) {
// ../rfc/8461:552
// We recently failed to fetch a policy, act as if MTA-STS is not implemented.
implement outgoing tls reports
we were already accepting, processing and displaying incoming tls reports. now
we start tracking TLS connection and security-policy-related errors for
outgoing message deliveries as well. we send reports once a day, to the
reporting addresses specified in TLSRPT records (rua) of a policy domain. these
reports are about MTA-STS policies and/or DANE policies, and about
STARTTLS-related failures.
sending reports is enabled by default, but can be disabled through setting
NoOutgoingTLSReports in mox.conf.
only at the end of the implementation process came the realization that the
TLSRPT policy domain for DANE (MX) hosts are separate from the TLSRPT policy
for the recipient domain, and that MTA-STS and DANE TLS/policy results are
typically delivered in separate reports. so MX hosts need their own TLSRPT
policies.
config for the per-host TLSRPT policy should be added to mox.conf for existing
installs, in field HostTLSRPT. it is automatically configured by quickstart for
new installs. with a HostTLSRPT config, the "dns records" and "dns check" admin
pages now suggest the per-host TLSRPT record. by creating that record, you're
requesting TLS reports about your MX host.
gathering all the TLS/policy results is somewhat tricky. the tentacles go
throughout the code. the positive result is that the TLS/policy-related code
had to be cleaned up a bit. for example, the smtpclient TLS modes now reflect
reality better, with independent settings about whether PKIX and/or DANE
verification has to be done, and/or whether verification errors have to be
ignored (e.g. for tls-required: no header). also, cached mtasts policies of
mode "none" are now cleaned up once the MTA-STS DNS record goes away.
2023-11-09 19:40:46 +03:00
// Result: ../rfc/8460:594
fd := tlsrpt . Details ( tlsrpt . ResultSTSPolicyFetch , "back-off-after-recent-fetch-error" )
reportResult = tlsrpt . MakeResult ( tlsrpt . STS , domain , fd )
return nil , reportResult , false , nil
2023-01-30 16:27:06 +03:00
} else if err != nil {
implement outgoing tls reports
we were already accepting, processing and displaying incoming tls reports. now
we start tracking TLS connection and security-policy-related errors for
outgoing message deliveries as well. we send reports once a day, to the
reporting addresses specified in TLSRPT records (rua) of a policy domain. these
reports are about MTA-STS policies and/or DANE policies, and about
STARTTLS-related failures.
sending reports is enabled by default, but can be disabled through setting
NoOutgoingTLSReports in mox.conf.
only at the end of the implementation process came the realization that the
TLSRPT policy domain for DANE (MX) hosts are separate from the TLSRPT policy
for the recipient domain, and that MTA-STS and DANE TLS/policy results are
typically delivered in separate reports. so MX hosts need their own TLSRPT
policies.
config for the per-host TLSRPT policy should be added to mox.conf for existing
installs, in field HostTLSRPT. it is automatically configured by quickstart for
new installs. with a HostTLSRPT config, the "dns records" and "dns check" admin
pages now suggest the per-host TLSRPT record. by creating that record, you're
requesting TLS reports about your MX host.
gathering all the TLS/policy results is somewhat tricky. the tentacles go
throughout the code. the positive result is that the TLS/policy-related code
had to be cleaned up a bit. for example, the smtpclient TLS modes now reflect
reality better, with independent settings about whether PKIX and/or DANE
verification has to be done, and/or whether verification errors have to be
ignored (e.g. for tls-required: no header). also, cached mtasts policies of
mode "none" are now cleaned up once the MTA-STS DNS record goes away.
2023-11-09 19:40:46 +03:00
// We don't add the result to the report, this is an internal error.
return nil , reportResult , false , fmt . Errorf ( "looking up mta-sts policy in cache: %w" , err )
2023-01-30 16:27:06 +03:00
}
// Policy was found in database. Check in DNS it is still fresh.
policy = & cachedPolicy . Policy
2023-05-22 15:40:36 +03:00
nctx , cancel := context . WithTimeout ( ctx , 30 * time . Second )
2023-01-30 16:27:06 +03:00
defer cancel ( )
2023-10-14 23:42:26 +03:00
record , _ , err := mtasts . LookupRecord ( nctx , resolver , domain )
2023-01-30 16:27:06 +03:00
if err != nil {
implement outgoing tls reports
we were already accepting, processing and displaying incoming tls reports. now
we start tracking TLS connection and security-policy-related errors for
outgoing message deliveries as well. we send reports once a day, to the
reporting addresses specified in TLSRPT records (rua) of a policy domain. these
reports are about MTA-STS policies and/or DANE policies, and about
STARTTLS-related failures.
sending reports is enabled by default, but can be disabled through setting
NoOutgoingTLSReports in mox.conf.
only at the end of the implementation process came the realization that the
TLSRPT policy domain for DANE (MX) hosts are separate from the TLSRPT policy
for the recipient domain, and that MTA-STS and DANE TLS/policy results are
typically delivered in separate reports. so MX hosts need their own TLSRPT
policies.
config for the per-host TLSRPT policy should be added to mox.conf for existing
installs, in field HostTLSRPT. it is automatically configured by quickstart for
new installs. with a HostTLSRPT config, the "dns records" and "dns check" admin
pages now suggest the per-host TLSRPT record. by creating that record, you're
requesting TLS reports about your MX host.
gathering all the TLS/policy results is somewhat tricky. the tentacles go
throughout the code. the positive result is that the TLS/policy-related code
had to be cleaned up a bit. for example, the smtpclient TLS modes now reflect
reality better, with independent settings about whether PKIX and/or DANE
verification has to be done, and/or whether verification errors have to be
ignored (e.g. for tls-required: no header). also, cached mtasts policies of
mode "none" are now cleaned up once the MTA-STS DNS record goes away.
2023-11-09 19:40:46 +03:00
if errors . Is ( err , mtasts . ErrNoRecord ) {
if policy . Mode != mtasts . ModeNone {
log . Errorx ( "no mtasts dns record while checking non-none policy for freshness, either domain owner removed mta-sts without phasing out policy with a none-policy for period of previous max-age, or this could be an attempt to downgrade to connection without mtasts, continuing with previous policy" , err )
}
// else, policy will be removed by periodic refresher in the near future.
} else {
2023-01-30 16:27:06 +03:00
// Could be a temporary DNS or configuration error.
log . Errorx ( "checking for freshness of cached mta-sts dns txt record for domain, continuing with previously cached policy" , err )
}
implement outgoing tls reports
we were already accepting, processing and displaying incoming tls reports. now
we start tracking TLS connection and security-policy-related errors for
outgoing message deliveries as well. we send reports once a day, to the
reporting addresses specified in TLSRPT records (rua) of a policy domain. these
reports are about MTA-STS policies and/or DANE policies, and about
STARTTLS-related failures.
sending reports is enabled by default, but can be disabled through setting
NoOutgoingTLSReports in mox.conf.
only at the end of the implementation process came the realization that the
TLSRPT policy domain for DANE (MX) hosts are separate from the TLSRPT policy
for the recipient domain, and that MTA-STS and DANE TLS/policy results are
typically delivered in separate reports. so MX hosts need their own TLSRPT
policies.
config for the per-host TLSRPT policy should be added to mox.conf for existing
installs, in field HostTLSRPT. it is automatically configured by quickstart for
new installs. with a HostTLSRPT config, the "dns records" and "dns check" admin
pages now suggest the per-host TLSRPT record. by creating that record, you're
requesting TLS reports about your MX host.
gathering all the TLS/policy results is somewhat tricky. the tentacles go
throughout the code. the positive result is that the TLS/policy-related code
had to be cleaned up a bit. for example, the smtpclient TLS modes now reflect
reality better, with independent settings about whether PKIX and/or DANE
verification has to be done, and/or whether verification errors have to be
ignored (e.g. for tls-required: no header). also, cached mtasts policies of
mode "none" are now cleaned up once the MTA-STS DNS record goes away.
2023-11-09 19:40:46 +03:00
// Result: ../rfc/8460:594
fd := tlsrpt . Details ( tlsrpt . ResultSTSPolicyFetch , mtasts . TLSReportFailureReason ( err ) )
if policy . Mode != mtasts . ModeNone {
fd . FailureReasonCode += "+fallback-to-cached-policy"
}
reportResult = tlsrpt . Result {
Policy : tlsrptPolicy ( policy , cachedPolicy . PolicyText , domain ) ,
FailureDetails : [ ] tlsrpt . FailureDetails { fd } ,
}
return policy , reportResult , false , nil
} else if record . ID == cachedPolicy . RecordID && cachedPolicy . PolicyText != "" {
// In the past, we didn't store the raw policy lines in cachedPolicy.Lines. We only
// stop now if we do have policy lines in the cache.
reportResult = tlsrpt . Result { Policy : tlsrptPolicy ( policy , cachedPolicy . PolicyText , domain ) }
return policy , reportResult , true , nil
2023-01-30 16:27:06 +03:00
}
2023-05-22 15:40:36 +03:00
implement outgoing tls reports
we were already accepting, processing and displaying incoming tls reports. now
we start tracking TLS connection and security-policy-related errors for
outgoing message deliveries as well. we send reports once a day, to the
reporting addresses specified in TLSRPT records (rua) of a policy domain. these
reports are about MTA-STS policies and/or DANE policies, and about
STARTTLS-related failures.
sending reports is enabled by default, but can be disabled through setting
NoOutgoingTLSReports in mox.conf.
only at the end of the implementation process came the realization that the
TLSRPT policy domain for DANE (MX) hosts are separate from the TLSRPT policy
for the recipient domain, and that MTA-STS and DANE TLS/policy results are
typically delivered in separate reports. so MX hosts need their own TLSRPT
policies.
config for the per-host TLSRPT policy should be added to mox.conf for existing
installs, in field HostTLSRPT. it is automatically configured by quickstart for
new installs. with a HostTLSRPT config, the "dns records" and "dns check" admin
pages now suggest the per-host TLSRPT record. by creating that record, you're
requesting TLS reports about your MX host.
gathering all the TLS/policy results is somewhat tricky. the tentacles go
throughout the code. the positive result is that the TLS/policy-related code
had to be cleaned up a bit. for example, the smtpclient TLS modes now reflect
reality better, with independent settings about whether PKIX and/or DANE
verification has to be done, and/or whether verification errors have to be
ignored (e.g. for tls-required: no header). also, cached mtasts policies of
mode "none" are now cleaned up once the MTA-STS DNS record goes away.
2023-11-09 19:40:46 +03:00
// New policy should be available, or we are fetching the policy again because we
// didn't store the raw policy lines in the past.
2023-05-22 15:40:36 +03:00
nctx , cancel = context . WithTimeout ( ctx , 30 * time . Second )
2023-01-30 16:27:06 +03:00
defer cancel ( )
implement outgoing tls reports
we were already accepting, processing and displaying incoming tls reports. now
we start tracking TLS connection and security-policy-related errors for
outgoing message deliveries as well. we send reports once a day, to the
reporting addresses specified in TLSRPT records (rua) of a policy domain. these
reports are about MTA-STS policies and/or DANE policies, and about
STARTTLS-related failures.
sending reports is enabled by default, but can be disabled through setting
NoOutgoingTLSReports in mox.conf.
only at the end of the implementation process came the realization that the
TLSRPT policy domain for DANE (MX) hosts are separate from the TLSRPT policy
for the recipient domain, and that MTA-STS and DANE TLS/policy results are
typically delivered in separate reports. so MX hosts need their own TLSRPT
policies.
config for the per-host TLSRPT policy should be added to mox.conf for existing
installs, in field HostTLSRPT. it is automatically configured by quickstart for
new installs. with a HostTLSRPT config, the "dns records" and "dns check" admin
pages now suggest the per-host TLSRPT record. by creating that record, you're
requesting TLS reports about your MX host.
gathering all the TLS/policy results is somewhat tricky. the tentacles go
throughout the code. the positive result is that the TLS/policy-related code
had to be cleaned up a bit. for example, the smtpclient TLS modes now reflect
reality better, with independent settings about whether PKIX and/or DANE
verification has to be done, and/or whether verification errors have to be
ignored (e.g. for tls-required: no header). also, cached mtasts policies of
mode "none" are now cleaned up once the MTA-STS DNS record goes away.
2023-11-09 19:40:46 +03:00
p , ptext , err := mtasts . FetchPolicy ( nctx , domain )
2023-01-30 16:27:06 +03:00
if err != nil {
log . Errorx ( "fetching updated policy for domain, continuing with previously cached policy" , err )
implement outgoing tls reports
we were already accepting, processing and displaying incoming tls reports. now
we start tracking TLS connection and security-policy-related errors for
outgoing message deliveries as well. we send reports once a day, to the
reporting addresses specified in TLSRPT records (rua) of a policy domain. these
reports are about MTA-STS policies and/or DANE policies, and about
STARTTLS-related failures.
sending reports is enabled by default, but can be disabled through setting
NoOutgoingTLSReports in mox.conf.
only at the end of the implementation process came the realization that the
TLSRPT policy domain for DANE (MX) hosts are separate from the TLSRPT policy
for the recipient domain, and that MTA-STS and DANE TLS/policy results are
typically delivered in separate reports. so MX hosts need their own TLSRPT
policies.
config for the per-host TLSRPT policy should be added to mox.conf for existing
installs, in field HostTLSRPT. it is automatically configured by quickstart for
new installs. with a HostTLSRPT config, the "dns records" and "dns check" admin
pages now suggest the per-host TLSRPT record. by creating that record, you're
requesting TLS reports about your MX host.
gathering all the TLS/policy results is somewhat tricky. the tentacles go
throughout the code. the positive result is that the TLS/policy-related code
had to be cleaned up a bit. for example, the smtpclient TLS modes now reflect
reality better, with independent settings about whether PKIX and/or DANE
verification has to be done, and/or whether verification errors have to be
ignored (e.g. for tls-required: no header). also, cached mtasts policies of
mode "none" are now cleaned up once the MTA-STS DNS record goes away.
2023-11-09 19:40:46 +03:00
fd := policyFetchFailureDetails ( err )
fd . FailureReasonCode += "+fallback-to-cached-policy"
reportResult = tlsrpt . Result {
Policy : tlsrptPolicy ( policy , cachedPolicy . PolicyText , domain ) ,
FailureDetails : [ ] tlsrpt . FailureDetails { fd } ,
}
return policy , reportResult , false , nil
2023-01-30 16:27:06 +03:00
}
implement outgoing tls reports
we were already accepting, processing and displaying incoming tls reports. now
we start tracking TLS connection and security-policy-related errors for
outgoing message deliveries as well. we send reports once a day, to the
reporting addresses specified in TLSRPT records (rua) of a policy domain. these
reports are about MTA-STS policies and/or DANE policies, and about
STARTTLS-related failures.
sending reports is enabled by default, but can be disabled through setting
NoOutgoingTLSReports in mox.conf.
only at the end of the implementation process came the realization that the
TLSRPT policy domain for DANE (MX) hosts are separate from the TLSRPT policy
for the recipient domain, and that MTA-STS and DANE TLS/policy results are
typically delivered in separate reports. so MX hosts need their own TLSRPT
policies.
config for the per-host TLSRPT policy should be added to mox.conf for existing
installs, in field HostTLSRPT. it is automatically configured by quickstart for
new installs. with a HostTLSRPT config, the "dns records" and "dns check" admin
pages now suggest the per-host TLSRPT record. by creating that record, you're
requesting TLS reports about your MX host.
gathering all the TLS/policy results is somewhat tricky. the tentacles go
throughout the code. the positive result is that the TLS/policy-related code
had to be cleaned up a bit. for example, the smtpclient TLS modes now reflect
reality better, with independent settings about whether PKIX and/or DANE
verification has to be done, and/or whether verification errors have to be
ignored (e.g. for tls-required: no header). also, cached mtasts policies of
mode "none" are now cleaned up once the MTA-STS DNS record goes away.
2023-11-09 19:40:46 +03:00
if err := Upsert ( ctx , domain , record . ID , p , ptext ) ; err != nil {
2023-01-30 16:27:06 +03:00
log . Errorx ( "inserting refreshed policy into cache, continuing with fresh policy" , err )
}
implement outgoing tls reports
we were already accepting, processing and displaying incoming tls reports. now
we start tracking TLS connection and security-policy-related errors for
outgoing message deliveries as well. we send reports once a day, to the
reporting addresses specified in TLSRPT records (rua) of a policy domain. these
reports are about MTA-STS policies and/or DANE policies, and about
STARTTLS-related failures.
sending reports is enabled by default, but can be disabled through setting
NoOutgoingTLSReports in mox.conf.
only at the end of the implementation process came the realization that the
TLSRPT policy domain for DANE (MX) hosts are separate from the TLSRPT policy
for the recipient domain, and that MTA-STS and DANE TLS/policy results are
typically delivered in separate reports. so MX hosts need their own TLSRPT
policies.
config for the per-host TLSRPT policy should be added to mox.conf for existing
installs, in field HostTLSRPT. it is automatically configured by quickstart for
new installs. with a HostTLSRPT config, the "dns records" and "dns check" admin
pages now suggest the per-host TLSRPT record. by creating that record, you're
requesting TLS reports about your MX host.
gathering all the TLS/policy results is somewhat tricky. the tentacles go
throughout the code. the positive result is that the TLS/policy-related code
had to be cleaned up a bit. for example, the smtpclient TLS modes now reflect
reality better, with independent settings about whether PKIX and/or DANE
verification has to be done, and/or whether verification errors have to be
ignored (e.g. for tls-required: no header). also, cached mtasts policies of
mode "none" are now cleaned up once the MTA-STS DNS record goes away.
2023-11-09 19:40:46 +03:00
reportResult = tlsrpt . Result { Policy : tlsrptPolicy ( p , ptext , domain ) }
return p , reportResult , true , nil
}
func policyFetchFailureDetails ( err error ) tlsrpt . FailureDetails {
var verificationErr * tls . CertificateVerificationError
if errors . As ( err , & verificationErr ) {
resultType , reasonCode := tlsrpt . TLSFailureDetails ( verificationErr )
// Result: ../rfc/8460:601
reason := string ( resultType )
if reasonCode != "" {
reason += "+" + reasonCode
}
return tlsrpt . Details ( tlsrpt . ResultSTSWebPKIInvalid , reason )
} else if errors . Is ( err , mtasts . ErrPolicySyntax ) {
// Result: ../rfc/8460:598
return tlsrpt . Details ( tlsrpt . ResultSTSPolicyInvalid , mtasts . TLSReportFailureReason ( err ) )
}
// Result: ../rfc/8460:594
return tlsrpt . Details ( tlsrpt . ResultSTSPolicyFetch , mtasts . TLSReportFailureReason ( err ) )
}
func tlsrptPolicy ( p * mtasts . Policy , policyText string , domain dns . Domain ) tlsrpt . ResultPolicy {
if policyText == "" {
// We didn't always store original policy lines. Reconstruct.
policyText = p . String ( )
}
lines := strings . Split ( strings . TrimSuffix ( policyText , "\n" ) , "\n" )
for i , line := range lines {
lines [ i ] = strings . TrimSuffix ( line , "\r" )
}
rp := tlsrpt . ResultPolicy {
Type : tlsrpt . STS ,
Domain : domain . ASCII ,
String : lines ,
}
rp . MXHost = make ( [ ] string , len ( p . MX ) )
for i , mx := range p . MX {
s := mx . Domain . ASCII
if mx . Wildcard {
s = "*." + s
}
rp . MXHost [ i ] = s
}
return rp
2023-01-30 16:27:06 +03:00
}