2023-01-30 16:27:06 +03:00
|
|
|
# github.com/beorn7/perks v1.0.1
|
|
|
|
|
## explicit; go 1.11
|
|
|
|
|
github.com/beorn7/perks/quantile
|
|
|
|
|
# github.com/cespare/xxhash/v2 v2.1.2
|
|
|
|
|
## explicit; go 1.11
|
|
|
|
|
github.com/cespare/xxhash/v2
|
|
|
|
|
# github.com/golang/protobuf v1.5.2
|
|
|
|
|
## explicit; go 1.9
|
|
|
|
|
github.com/golang/protobuf/proto
|
|
|
|
|
github.com/golang/protobuf/ptypes/timestamp
|
|
|
|
|
# github.com/matttproud/golang_protobuf_extensions v1.0.1
|
|
|
|
|
## explicit
|
|
|
|
|
github.com/matttproud/golang_protobuf_extensions/pbutil
|
implement outgoing tls reports
we were already accepting, processing and displaying incoming tls reports. now
we start tracking TLS connection and security-policy-related errors for
outgoing message deliveries as well. we send reports once a day, to the
reporting addresses specified in TLSRPT records (rua) of a policy domain. these
reports are about MTA-STS policies and/or DANE policies, and about
STARTTLS-related failures.
sending reports is enabled by default, but can be disabled through setting
NoOutgoingTLSReports in mox.conf.
only at the end of the implementation process came the realization that the
TLSRPT policy domain for DANE (MX) hosts are separate from the TLSRPT policy
for the recipient domain, and that MTA-STS and DANE TLS/policy results are
typically delivered in separate reports. so MX hosts need their own TLSRPT
policies.
config for the per-host TLSRPT policy should be added to mox.conf for existing
installs, in field HostTLSRPT. it is automatically configured by quickstart for
new installs. with a HostTLSRPT config, the "dns records" and "dns check" admin
pages now suggest the per-host TLSRPT record. by creating that record, you're
requesting TLS reports about your MX host.
gathering all the TLS/policy results is somewhat tricky. the tentacles go
throughout the code. the positive result is that the TLS/policy-related code
had to be cleaned up a bit. for example, the smtpclient TLS modes now reflect
reality better, with independent settings about whether PKIX and/or DANE
verification has to be done, and/or whether verification errors have to be
ignored (e.g. for tls-required: no header). also, cached mtasts policies of
mode "none" are now cleaned up once the MTA-STS DNS record goes away.
2023-11-09 19:40:46 +03:00
|
|
|
# github.com/mjl-/adns v0.0.0-20231109160910-82839fe3e6ae
|
implement dnssec-awareness throughout code, and dane for incoming/outgoing mail delivery
the vendored dns resolver code is a copy of the go stdlib dns resolver, with
awareness of the "authentic data" (i.e. dnssec secure) added, as well as support
for enhanced dns errors, and looking up tlsa records (for dane). ideally it
would be upstreamed, but the chances seem slim.
dnssec-awareness is added to all packages, e.g. spf, dkim, dmarc, iprev. their
dnssec status is added to the Received message headers for incoming email.
but the main reason to add dnssec was for implementing dane. with dane, the
verification of tls certificates can be done through certificates/public keys
published in dns (in the tlsa records). this only makes sense (is trustworthy)
if those dns records can be verified to be authentic.
mox now applies dane to delivering messages over smtp. mox already implemented
mta-sts for webpki/pkix-verification of certificates against the (large) pool
of CA's, and still enforces those policies when present. but it now also checks
for dane records, and will verify those if present. if dane and mta-sts are
both absent, the regular opportunistic tls with starttls is still done. and the
fallback to plaintext is also still done.
mox also makes it easy to setup dane for incoming deliveries, so other servers
can deliver with dane tls certificate verification. the quickstart now
generates private keys that are used when requesting certificates with acme.
the private keys are pre-generated because they must be static and known during
setup, because their public keys must be published in tlsa records in dns.
autocert would generate private keys on its own, so had to be forked to add the
option to provide the private key when requesting a new certificate. hopefully
upstream will accept the change and we can drop the fork.
with this change, using the quickstart to setup a new mox instance, the checks
at internet.nl result in a 100% score, provided the domain is dnssec-signed and
the network doesn't have any issues.
2023-10-10 13:09:35 +03:00
|
|
|
## explicit; go 1.20
|
|
|
|
|
github.com/mjl-/adns
|
|
|
|
|
github.com/mjl-/adns/internal/bytealg
|
|
|
|
|
github.com/mjl-/adns/internal/itoa
|
|
|
|
|
github.com/mjl-/adns/internal/singleflight
|
2023-10-13 10:28:01 +03:00
|
|
|
# github.com/mjl-/autocert v0.0.0-20231013072455-c361ae2e20a6
|
implement dnssec-awareness throughout code, and dane for incoming/outgoing mail delivery
the vendored dns resolver code is a copy of the go stdlib dns resolver, with
awareness of the "authentic data" (i.e. dnssec secure) added, as well as support
for enhanced dns errors, and looking up tlsa records (for dane). ideally it
would be upstreamed, but the chances seem slim.
dnssec-awareness is added to all packages, e.g. spf, dkim, dmarc, iprev. their
dnssec status is added to the Received message headers for incoming email.
but the main reason to add dnssec was for implementing dane. with dane, the
verification of tls certificates can be done through certificates/public keys
published in dns (in the tlsa records). this only makes sense (is trustworthy)
if those dns records can be verified to be authentic.
mox now applies dane to delivering messages over smtp. mox already implemented
mta-sts for webpki/pkix-verification of certificates against the (large) pool
of CA's, and still enforces those policies when present. but it now also checks
for dane records, and will verify those if present. if dane and mta-sts are
both absent, the regular opportunistic tls with starttls is still done. and the
fallback to plaintext is also still done.
mox also makes it easy to setup dane for incoming deliveries, so other servers
can deliver with dane tls certificate verification. the quickstart now
generates private keys that are used when requesting certificates with acme.
the private keys are pre-generated because they must be static and known during
setup, because their public keys must be published in tlsa records in dns.
autocert would generate private keys on its own, so had to be forked to add the
option to provide the private key when requesting a new certificate. hopefully
upstream will accept the change and we can drop the fork.
with this change, using the quickstart to setup a new mox instance, the checks
at internet.nl result in a 100% score, provided the domain is dnssec-signed and
the network doesn't have any issues.
2023-10-10 13:09:35 +03:00
|
|
|
## explicit; go 1.20
|
|
|
|
|
github.com/mjl-/autocert
|
add webmail
it was far down on the roadmap, but implemented earlier, because it's
interesting, and to help prepare for a jmap implementation. for jmap we need to
implement more client-like functionality than with just imap. internal data
structures need to change. jmap has lots of other requirements, so it's already
a big project. by implementing a webmail now, some of the required data
structure changes become clear and can be made now, so the later jmap
implementation can do things similarly to the webmail code. the webmail
frontend and webmail are written together, making their interface/api much
smaller and simpler than jmap.
one of the internal changes is that we now keep track of per-mailbox
total/unread/unseen/deleted message counts and mailbox sizes. keeping this
data consistent after any change to the stored messages (through the code base)
is tricky, so mox now has a consistency check that verifies the counts are
correct, which runs only during tests, each time an internal account reference
is closed. we have a few more internal "changes" that are propagated for the
webmail frontend (that imap doesn't have a way to propagate on a connection),
like changes to the special-use flags on mailboxes, and used keywords in a
mailbox. more changes that will be required have revealed themselves while
implementing the webmail, and will be implemented next.
the webmail user interface is modeled after the mail clients i use or have
used: thunderbird, macos mail, mutt; and webmails i normally only use for
testing: gmail, proton, yahoo, outlook. a somewhat technical user is assumed,
but still the goal is to make this webmail client easy to use for everyone. the
user interface looks like most other mail clients: a list of mailboxes, a
search bar, a message list view, and message details. there is a top/bottom and
a left/right layout for the list/message view, default is automatic based on
screen size. the panes can be resized by the user. buttons for actions are just
text, not icons. clicking a button briefly shows the shortcut for the action in
the bottom right, helping with learning to operate quickly. any text that is
underdotted has a title attribute that causes more information to be displayed,
e.g. what a button does or a field is about. to highlight potential phishing
attempts, any text (anywhere in the webclient) that switches unicode "blocks"
(a rough approximation to (language) scripts) within a word is underlined
orange. multiple messages can be selected with familiar ui interaction:
clicking while holding control and/or shift keys. keyboard navigation works
with arrows/page up/down and home/end keys, and also with a few basic vi-like
keys for list/message navigation. we prefer showing the text instead of
html (with inlined images only) version of a message. html messages are shown
in an iframe served from an endpoint with CSP headers to prevent dangerous
resources (scripts, external images) from being loaded. the html is also
sanitized, with javascript removed. a user can choose to load external
resources (e.g. images for tracking purposes).
the frontend is just (strict) typescript, no external frameworks. all
incoming/outgoing data is typechecked, both the api request parameters and
response types, and the data coming in over SSE. the types and checking code
are generated with sherpats, which uses the api definitions generated by
sherpadoc based on the Go code. so types from the backend are automatically
propagated to the frontend. since there is no framework to automatically
propagate properties and rerender components, changes coming in over the SSE
connection are propagated explicitly with regular function calls. the ui is
separated into "views", each with a "root" dom element that is added to the
visible document. these views have additional functions for getting changes
propagated, often resulting in the view updating its (internal) ui state (dom).
we keep the frontend compilation simple, it's just a few typescript files that
get compiled (combined and types stripped) into a single js file, no additional
runtime code needed or complicated build processes used. the webmail is served
is served from a compressed, cachable html file that includes style and the
javascript, currently just over 225kb uncompressed, under 60kb compressed (not
minified, including comments). we include the generated js files in the
repository, to keep Go's easily buildable self-contained binaries.
authentication is basic http, as with the account and admin pages. most data
comes in over one long-term SSE connection to the backend. api requests signal
which mailbox/search/messages are requested over the SSE connection. fetching
individual messages, and making changes, are done through api calls. the
operations are similar to imap, so some code has been moved from package
imapserver to package store. the future jmap implementation will benefit from
these changes too. more functionality will probably be moved to the store
package in the future.
the quickstart enables webmail on the internal listener by default (for new
installs). users can enable it on the public listener if they want to. mox
localserve enables it too. to enable webmail on existing installs, add settings
like the following to the listeners in mox.conf, similar to AccountHTTP(S):
WebmailHTTP:
Enabled: true
WebmailHTTPS:
Enabled: true
special thanks to liesbeth, gerben, andrii for early user feedback.
there is plenty still to do, see the list at the top of webmail/webmail.ts.
feedback welcome as always.
2023-08-07 22:57:03 +03:00
|
|
|
# github.com/mjl-/bstore v0.0.2
|
2023-01-30 16:27:06 +03:00
|
|
|
## explicit; go 1.19
|
|
|
|
|
github.com/mjl-/bstore
|
2023-09-21 09:59:10 +03:00
|
|
|
# github.com/mjl-/sconf v0.0.5
|
2023-01-30 16:27:06 +03:00
|
|
|
## explicit; go 1.12
|
|
|
|
|
github.com/mjl-/sconf
|
add webmail
it was far down on the roadmap, but implemented earlier, because it's
interesting, and to help prepare for a jmap implementation. for jmap we need to
implement more client-like functionality than with just imap. internal data
structures need to change. jmap has lots of other requirements, so it's already
a big project. by implementing a webmail now, some of the required data
structure changes become clear and can be made now, so the later jmap
implementation can do things similarly to the webmail code. the webmail
frontend and webmail are written together, making their interface/api much
smaller and simpler than jmap.
one of the internal changes is that we now keep track of per-mailbox
total/unread/unseen/deleted message counts and mailbox sizes. keeping this
data consistent after any change to the stored messages (through the code base)
is tricky, so mox now has a consistency check that verifies the counts are
correct, which runs only during tests, each time an internal account reference
is closed. we have a few more internal "changes" that are propagated for the
webmail frontend (that imap doesn't have a way to propagate on a connection),
like changes to the special-use flags on mailboxes, and used keywords in a
mailbox. more changes that will be required have revealed themselves while
implementing the webmail, and will be implemented next.
the webmail user interface is modeled after the mail clients i use or have
used: thunderbird, macos mail, mutt; and webmails i normally only use for
testing: gmail, proton, yahoo, outlook. a somewhat technical user is assumed,
but still the goal is to make this webmail client easy to use for everyone. the
user interface looks like most other mail clients: a list of mailboxes, a
search bar, a message list view, and message details. there is a top/bottom and
a left/right layout for the list/message view, default is automatic based on
screen size. the panes can be resized by the user. buttons for actions are just
text, not icons. clicking a button briefly shows the shortcut for the action in
the bottom right, helping with learning to operate quickly. any text that is
underdotted has a title attribute that causes more information to be displayed,
e.g. what a button does or a field is about. to highlight potential phishing
attempts, any text (anywhere in the webclient) that switches unicode "blocks"
(a rough approximation to (language) scripts) within a word is underlined
orange. multiple messages can be selected with familiar ui interaction:
clicking while holding control and/or shift keys. keyboard navigation works
with arrows/page up/down and home/end keys, and also with a few basic vi-like
keys for list/message navigation. we prefer showing the text instead of
html (with inlined images only) version of a message. html messages are shown
in an iframe served from an endpoint with CSP headers to prevent dangerous
resources (scripts, external images) from being loaded. the html is also
sanitized, with javascript removed. a user can choose to load external
resources (e.g. images for tracking purposes).
the frontend is just (strict) typescript, no external frameworks. all
incoming/outgoing data is typechecked, both the api request parameters and
response types, and the data coming in over SSE. the types and checking code
are generated with sherpats, which uses the api definitions generated by
sherpadoc based on the Go code. so types from the backend are automatically
propagated to the frontend. since there is no framework to automatically
propagate properties and rerender components, changes coming in over the SSE
connection are propagated explicitly with regular function calls. the ui is
separated into "views", each with a "root" dom element that is added to the
visible document. these views have additional functions for getting changes
propagated, often resulting in the view updating its (internal) ui state (dom).
we keep the frontend compilation simple, it's just a few typescript files that
get compiled (combined and types stripped) into a single js file, no additional
runtime code needed or complicated build processes used. the webmail is served
is served from a compressed, cachable html file that includes style and the
javascript, currently just over 225kb uncompressed, under 60kb compressed (not
minified, including comments). we include the generated js files in the
repository, to keep Go's easily buildable self-contained binaries.
authentication is basic http, as with the account and admin pages. most data
comes in over one long-term SSE connection to the backend. api requests signal
which mailbox/search/messages are requested over the SSE connection. fetching
individual messages, and making changes, are done through api calls. the
operations are similar to imap, so some code has been moved from package
imapserver to package store. the future jmap implementation will benefit from
these changes too. more functionality will probably be moved to the store
package in the future.
the quickstart enables webmail on the internal listener by default (for new
installs). users can enable it on the public listener if they want to. mox
localserve enables it too. to enable webmail on existing installs, add settings
like the following to the listeners in mox.conf, similar to AccountHTTP(S):
WebmailHTTP:
Enabled: true
WebmailHTTPS:
Enabled: true
special thanks to liesbeth, gerben, andrii for early user feedback.
there is plenty still to do, see the list at the top of webmail/webmail.ts.
feedback welcome as always.
2023-08-07 22:57:03 +03:00
|
|
|
# github.com/mjl-/sherpa v0.6.6
|
2023-01-30 16:27:06 +03:00
|
|
|
## explicit; go 1.12
|
|
|
|
|
github.com/mjl-/sherpa
|
add webmail
it was far down on the roadmap, but implemented earlier, because it's
interesting, and to help prepare for a jmap implementation. for jmap we need to
implement more client-like functionality than with just imap. internal data
structures need to change. jmap has lots of other requirements, so it's already
a big project. by implementing a webmail now, some of the required data
structure changes become clear and can be made now, so the later jmap
implementation can do things similarly to the webmail code. the webmail
frontend and webmail are written together, making their interface/api much
smaller and simpler than jmap.
one of the internal changes is that we now keep track of per-mailbox
total/unread/unseen/deleted message counts and mailbox sizes. keeping this
data consistent after any change to the stored messages (through the code base)
is tricky, so mox now has a consistency check that verifies the counts are
correct, which runs only during tests, each time an internal account reference
is closed. we have a few more internal "changes" that are propagated for the
webmail frontend (that imap doesn't have a way to propagate on a connection),
like changes to the special-use flags on mailboxes, and used keywords in a
mailbox. more changes that will be required have revealed themselves while
implementing the webmail, and will be implemented next.
the webmail user interface is modeled after the mail clients i use or have
used: thunderbird, macos mail, mutt; and webmails i normally only use for
testing: gmail, proton, yahoo, outlook. a somewhat technical user is assumed,
but still the goal is to make this webmail client easy to use for everyone. the
user interface looks like most other mail clients: a list of mailboxes, a
search bar, a message list view, and message details. there is a top/bottom and
a left/right layout for the list/message view, default is automatic based on
screen size. the panes can be resized by the user. buttons for actions are just
text, not icons. clicking a button briefly shows the shortcut for the action in
the bottom right, helping with learning to operate quickly. any text that is
underdotted has a title attribute that causes more information to be displayed,
e.g. what a button does or a field is about. to highlight potential phishing
attempts, any text (anywhere in the webclient) that switches unicode "blocks"
(a rough approximation to (language) scripts) within a word is underlined
orange. multiple messages can be selected with familiar ui interaction:
clicking while holding control and/or shift keys. keyboard navigation works
with arrows/page up/down and home/end keys, and also with a few basic vi-like
keys for list/message navigation. we prefer showing the text instead of
html (with inlined images only) version of a message. html messages are shown
in an iframe served from an endpoint with CSP headers to prevent dangerous
resources (scripts, external images) from being loaded. the html is also
sanitized, with javascript removed. a user can choose to load external
resources (e.g. images for tracking purposes).
the frontend is just (strict) typescript, no external frameworks. all
incoming/outgoing data is typechecked, both the api request parameters and
response types, and the data coming in over SSE. the types and checking code
are generated with sherpats, which uses the api definitions generated by
sherpadoc based on the Go code. so types from the backend are automatically
propagated to the frontend. since there is no framework to automatically
propagate properties and rerender components, changes coming in over the SSE
connection are propagated explicitly with regular function calls. the ui is
separated into "views", each with a "root" dom element that is added to the
visible document. these views have additional functions for getting changes
propagated, often resulting in the view updating its (internal) ui state (dom).
we keep the frontend compilation simple, it's just a few typescript files that
get compiled (combined and types stripped) into a single js file, no additional
runtime code needed or complicated build processes used. the webmail is served
is served from a compressed, cachable html file that includes style and the
javascript, currently just over 225kb uncompressed, under 60kb compressed (not
minified, including comments). we include the generated js files in the
repository, to keep Go's easily buildable self-contained binaries.
authentication is basic http, as with the account and admin pages. most data
comes in over one long-term SSE connection to the backend. api requests signal
which mailbox/search/messages are requested over the SSE connection. fetching
individual messages, and making changes, are done through api calls. the
operations are similar to imap, so some code has been moved from package
imapserver to package store. the future jmap implementation will benefit from
these changes too. more functionality will probably be moved to the store
package in the future.
the quickstart enables webmail on the internal listener by default (for new
installs). users can enable it on the public listener if they want to. mox
localserve enables it too. to enable webmail on existing installs, add settings
like the following to the listeners in mox.conf, similar to AccountHTTP(S):
WebmailHTTP:
Enabled: true
WebmailHTTPS:
Enabled: true
special thanks to liesbeth, gerben, andrii for early user feedback.
there is plenty still to do, see the list at the top of webmail/webmail.ts.
feedback welcome as always.
2023-08-07 22:57:03 +03:00
|
|
|
# github.com/mjl-/sherpadoc v0.0.12
|
2023-01-30 16:27:06 +03:00
|
|
|
## explicit; go 1.16
|
|
|
|
|
github.com/mjl-/sherpadoc
|
|
|
|
|
github.com/mjl-/sherpadoc/cmd/sherpadoc
|
|
|
|
|
# github.com/mjl-/sherpaprom v0.0.2
|
|
|
|
|
## explicit; go 1.12
|
|
|
|
|
github.com/mjl-/sherpaprom
|
add webmail
it was far down on the roadmap, but implemented earlier, because it's
interesting, and to help prepare for a jmap implementation. for jmap we need to
implement more client-like functionality than with just imap. internal data
structures need to change. jmap has lots of other requirements, so it's already
a big project. by implementing a webmail now, some of the required data
structure changes become clear and can be made now, so the later jmap
implementation can do things similarly to the webmail code. the webmail
frontend and webmail are written together, making their interface/api much
smaller and simpler than jmap.
one of the internal changes is that we now keep track of per-mailbox
total/unread/unseen/deleted message counts and mailbox sizes. keeping this
data consistent after any change to the stored messages (through the code base)
is tricky, so mox now has a consistency check that verifies the counts are
correct, which runs only during tests, each time an internal account reference
is closed. we have a few more internal "changes" that are propagated for the
webmail frontend (that imap doesn't have a way to propagate on a connection),
like changes to the special-use flags on mailboxes, and used keywords in a
mailbox. more changes that will be required have revealed themselves while
implementing the webmail, and will be implemented next.
the webmail user interface is modeled after the mail clients i use or have
used: thunderbird, macos mail, mutt; and webmails i normally only use for
testing: gmail, proton, yahoo, outlook. a somewhat technical user is assumed,
but still the goal is to make this webmail client easy to use for everyone. the
user interface looks like most other mail clients: a list of mailboxes, a
search bar, a message list view, and message details. there is a top/bottom and
a left/right layout for the list/message view, default is automatic based on
screen size. the panes can be resized by the user. buttons for actions are just
text, not icons. clicking a button briefly shows the shortcut for the action in
the bottom right, helping with learning to operate quickly. any text that is
underdotted has a title attribute that causes more information to be displayed,
e.g. what a button does or a field is about. to highlight potential phishing
attempts, any text (anywhere in the webclient) that switches unicode "blocks"
(a rough approximation to (language) scripts) within a word is underlined
orange. multiple messages can be selected with familiar ui interaction:
clicking while holding control and/or shift keys. keyboard navigation works
with arrows/page up/down and home/end keys, and also with a few basic vi-like
keys for list/message navigation. we prefer showing the text instead of
html (with inlined images only) version of a message. html messages are shown
in an iframe served from an endpoint with CSP headers to prevent dangerous
resources (scripts, external images) from being loaded. the html is also
sanitized, with javascript removed. a user can choose to load external
resources (e.g. images for tracking purposes).
the frontend is just (strict) typescript, no external frameworks. all
incoming/outgoing data is typechecked, both the api request parameters and
response types, and the data coming in over SSE. the types and checking code
are generated with sherpats, which uses the api definitions generated by
sherpadoc based on the Go code. so types from the backend are automatically
propagated to the frontend. since there is no framework to automatically
propagate properties and rerender components, changes coming in over the SSE
connection are propagated explicitly with regular function calls. the ui is
separated into "views", each with a "root" dom element that is added to the
visible document. these views have additional functions for getting changes
propagated, often resulting in the view updating its (internal) ui state (dom).
we keep the frontend compilation simple, it's just a few typescript files that
get compiled (combined and types stripped) into a single js file, no additional
runtime code needed or complicated build processes used. the webmail is served
is served from a compressed, cachable html file that includes style and the
javascript, currently just over 225kb uncompressed, under 60kb compressed (not
minified, including comments). we include the generated js files in the
repository, to keep Go's easily buildable self-contained binaries.
authentication is basic http, as with the account and admin pages. most data
comes in over one long-term SSE connection to the backend. api requests signal
which mailbox/search/messages are requested over the SSE connection. fetching
individual messages, and making changes, are done through api calls. the
operations are similar to imap, so some code has been moved from package
imapserver to package store. the future jmap implementation will benefit from
these changes too. more functionality will probably be moved to the store
package in the future.
the quickstart enables webmail on the internal listener by default (for new
installs). users can enable it on the public listener if they want to. mox
localserve enables it too. to enable webmail on existing installs, add settings
like the following to the listeners in mox.conf, similar to AccountHTTP(S):
WebmailHTTP:
Enabled: true
WebmailHTTPS:
Enabled: true
special thanks to liesbeth, gerben, andrii for early user feedback.
there is plenty still to do, see the list at the top of webmail/webmail.ts.
feedback welcome as always.
2023-08-07 22:57:03 +03:00
|
|
|
# github.com/mjl-/sherpats v0.0.4
|
|
|
|
|
## explicit; go 1.12
|
|
|
|
|
github.com/mjl-/sherpats
|
|
|
|
|
github.com/mjl-/sherpats/cmd/sherpats
|
2023-09-21 09:59:10 +03:00
|
|
|
# github.com/mjl-/xfmt v0.0.2
|
2023-01-30 16:27:06 +03:00
|
|
|
## explicit; go 1.12
|
|
|
|
|
github.com/mjl-/xfmt
|
|
|
|
|
# github.com/prometheus/client_golang v1.14.0
|
|
|
|
|
## explicit; go 1.17
|
|
|
|
|
github.com/prometheus/client_golang/prometheus
|
|
|
|
|
github.com/prometheus/client_golang/prometheus/internal
|
|
|
|
|
github.com/prometheus/client_golang/prometheus/promauto
|
|
|
|
|
github.com/prometheus/client_golang/prometheus/promhttp
|
|
|
|
|
# github.com/prometheus/client_model v0.3.0
|
|
|
|
|
## explicit; go 1.9
|
|
|
|
|
github.com/prometheus/client_model/go
|
|
|
|
|
# github.com/prometheus/common v0.37.0
|
|
|
|
|
## explicit; go 1.16
|
|
|
|
|
github.com/prometheus/common/expfmt
|
|
|
|
|
github.com/prometheus/common/internal/bitbucket.org/ww/goautoneg
|
|
|
|
|
github.com/prometheus/common/model
|
|
|
|
|
# github.com/prometheus/procfs v0.8.0
|
|
|
|
|
## explicit; go 1.17
|
|
|
|
|
github.com/prometheus/procfs
|
|
|
|
|
github.com/prometheus/procfs/internal/fs
|
|
|
|
|
github.com/prometheus/procfs/internal/util
|
2023-11-03 10:31:30 +03:00
|
|
|
# go.etcd.io/bbolt v1.3.8
|
2023-02-17 20:55:01 +03:00
|
|
|
## explicit; go 1.17
|
2023-01-30 16:27:06 +03:00
|
|
|
go.etcd.io/bbolt
|
implement dnssec-awareness throughout code, and dane for incoming/outgoing mail delivery
the vendored dns resolver code is a copy of the go stdlib dns resolver, with
awareness of the "authentic data" (i.e. dnssec secure) added, as well as support
for enhanced dns errors, and looking up tlsa records (for dane). ideally it
would be upstreamed, but the chances seem slim.
dnssec-awareness is added to all packages, e.g. spf, dkim, dmarc, iprev. their
dnssec status is added to the Received message headers for incoming email.
but the main reason to add dnssec was for implementing dane. with dane, the
verification of tls certificates can be done through certificates/public keys
published in dns (in the tlsa records). this only makes sense (is trustworthy)
if those dns records can be verified to be authentic.
mox now applies dane to delivering messages over smtp. mox already implemented
mta-sts for webpki/pkix-verification of certificates against the (large) pool
of CA's, and still enforces those policies when present. but it now also checks
for dane records, and will verify those if present. if dane and mta-sts are
both absent, the regular opportunistic tls with starttls is still done. and the
fallback to plaintext is also still done.
mox also makes it easy to setup dane for incoming deliveries, so other servers
can deliver with dane tls certificate verification. the quickstart now
generates private keys that are used when requesting certificates with acme.
the private keys are pre-generated because they must be static and known during
setup, because their public keys must be published in tlsa records in dns.
autocert would generate private keys on its own, so had to be forked to add the
option to provide the private key when requesting a new certificate. hopefully
upstream will accept the change and we can drop the fork.
with this change, using the quickstart to setup a new mox instance, the checks
at internet.nl result in a 100% score, provided the domain is dnssec-signed and
the network doesn't have any issues.
2023-10-10 13:09:35 +03:00
|
|
|
# golang.org/x/crypto v0.14.0
|
2023-01-30 16:27:06 +03:00
|
|
|
## explicit; go 1.17
|
|
|
|
|
golang.org/x/crypto/acme
|
|
|
|
|
golang.org/x/crypto/bcrypt
|
|
|
|
|
golang.org/x/crypto/blake2b
|
|
|
|
|
golang.org/x/crypto/blowfish
|
|
|
|
|
golang.org/x/crypto/pbkdf2
|
2023-08-15 11:58:01 +03:00
|
|
|
# golang.org/x/exp v0.0.0-20230811145659-89c5cff77bcb
|
2023-06-24 01:24:43 +03:00
|
|
|
## explicit; go 1.20
|
|
|
|
|
golang.org/x/exp/constraints
|
|
|
|
|
golang.org/x/exp/maps
|
|
|
|
|
golang.org/x/exp/slices
|
2023-08-15 11:58:01 +03:00
|
|
|
# golang.org/x/mod v0.12.0
|
2023-01-30 16:27:06 +03:00
|
|
|
## explicit; go 1.17
|
|
|
|
|
golang.org/x/mod/internal/lazyregexp
|
|
|
|
|
golang.org/x/mod/modfile
|
|
|
|
|
golang.org/x/mod/module
|
|
|
|
|
golang.org/x/mod/semver
|
implement dnssec-awareness throughout code, and dane for incoming/outgoing mail delivery
the vendored dns resolver code is a copy of the go stdlib dns resolver, with
awareness of the "authentic data" (i.e. dnssec secure) added, as well as support
for enhanced dns errors, and looking up tlsa records (for dane). ideally it
would be upstreamed, but the chances seem slim.
dnssec-awareness is added to all packages, e.g. spf, dkim, dmarc, iprev. their
dnssec status is added to the Received message headers for incoming email.
but the main reason to add dnssec was for implementing dane. with dane, the
verification of tls certificates can be done through certificates/public keys
published in dns (in the tlsa records). this only makes sense (is trustworthy)
if those dns records can be verified to be authentic.
mox now applies dane to delivering messages over smtp. mox already implemented
mta-sts for webpki/pkix-verification of certificates against the (large) pool
of CA's, and still enforces those policies when present. but it now also checks
for dane records, and will verify those if present. if dane and mta-sts are
both absent, the regular opportunistic tls with starttls is still done. and the
fallback to plaintext is also still done.
mox also makes it easy to setup dane for incoming deliveries, so other servers
can deliver with dane tls certificate verification. the quickstart now
generates private keys that are used when requesting certificates with acme.
the private keys are pre-generated because they must be static and known during
setup, because their public keys must be published in tlsa records in dns.
autocert would generate private keys on its own, so had to be forked to add the
option to provide the private key when requesting a new certificate. hopefully
upstream will accept the change and we can drop the fork.
with this change, using the quickstart to setup a new mox instance, the checks
at internet.nl result in a 100% score, provided the domain is dnssec-signed and
the network doesn't have any issues.
2023-10-10 13:09:35 +03:00
|
|
|
# golang.org/x/net v0.16.0
|
2023-01-30 16:27:06 +03:00
|
|
|
## explicit; go 1.17
|
implement dnssec-awareness throughout code, and dane for incoming/outgoing mail delivery
the vendored dns resolver code is a copy of the go stdlib dns resolver, with
awareness of the "authentic data" (i.e. dnssec secure) added, as well as support
for enhanced dns errors, and looking up tlsa records (for dane). ideally it
would be upstreamed, but the chances seem slim.
dnssec-awareness is added to all packages, e.g. spf, dkim, dmarc, iprev. their
dnssec status is added to the Received message headers for incoming email.
but the main reason to add dnssec was for implementing dane. with dane, the
verification of tls certificates can be done through certificates/public keys
published in dns (in the tlsa records). this only makes sense (is trustworthy)
if those dns records can be verified to be authentic.
mox now applies dane to delivering messages over smtp. mox already implemented
mta-sts for webpki/pkix-verification of certificates against the (large) pool
of CA's, and still enforces those policies when present. but it now also checks
for dane records, and will verify those if present. if dane and mta-sts are
both absent, the regular opportunistic tls with starttls is still done. and the
fallback to plaintext is also still done.
mox also makes it easy to setup dane for incoming deliveries, so other servers
can deliver with dane tls certificate verification. the quickstart now
generates private keys that are used when requesting certificates with acme.
the private keys are pre-generated because they must be static and known during
setup, because their public keys must be published in tlsa records in dns.
autocert would generate private keys on its own, so had to be forked to add the
option to provide the private key when requesting a new certificate. hopefully
upstream will accept the change and we can drop the fork.
with this change, using the quickstart to setup a new mox instance, the checks
at internet.nl result in a 100% score, provided the domain is dnssec-signed and
the network doesn't have any issues.
2023-10-10 13:09:35 +03:00
|
|
|
golang.org/x/net/dns/dnsmessage
|
2023-01-30 16:27:06 +03:00
|
|
|
golang.org/x/net/html
|
|
|
|
|
golang.org/x/net/html/atom
|
|
|
|
|
golang.org/x/net/idna
|
new feature: when delivering messages from the queue, make it possible to use a "transport"
the default transport is still just "direct delivery", where we connect to the
destination domain's MX servers.
other transports are:
- regular smtp without authentication, this is relaying to a smarthost.
- submission with authentication, e.g. to a third party email sending service.
- direct delivery, but with with connections going through a socks proxy. this
can be helpful if your ip is blocked, you need to get email out, and you have
another IP that isn't blocked.
keep in mind that for all of the above, appropriate SPF/DKIM settings have to
be configured. the "dnscheck" for a domain does a check for any SOCKS IP in the
SPF record. SPF for smtp/submission (ranges? includes?) and any DKIM
requirements cannot really be checked.
which transport is used can be configured through routes. routes can be set on
an account, a domain, or globally. the routes are evaluated in that order, with
the first match selecting the transport. these routes are evaluated for each
delivery attempt. common selection criteria are recipient domain and sender
domain, but also which delivery attempt this is. you could configured mox to
attempt sending through a 3rd party from the 4th attempt onwards.
routes and transports are optional. if no route matches, or an empty/zero
transport is selected, normal direct delivery is done.
we could already "submit" emails with 3rd party accounts with "sendmail". but
we now support more SASL authentication mechanisms with SMTP (not only PLAIN,
but also SCRAM-SHA-256, SCRAM-SHA-1 and CRAM-MD5), which sendmail now also
supports. sendmail will use the most secure mechanism supported by the server,
or the explicitly configured mechanism.
for issue #36 by dmikushin. also based on earlier discussion on hackernews.
2023-06-16 19:38:28 +03:00
|
|
|
golang.org/x/net/internal/socks
|
|
|
|
|
golang.org/x/net/proxy
|
2023-05-30 23:11:31 +03:00
|
|
|
golang.org/x/net/websocket
|
implement dnssec-awareness throughout code, and dane for incoming/outgoing mail delivery
the vendored dns resolver code is a copy of the go stdlib dns resolver, with
awareness of the "authentic data" (i.e. dnssec secure) added, as well as support
for enhanced dns errors, and looking up tlsa records (for dane). ideally it
would be upstreamed, but the chances seem slim.
dnssec-awareness is added to all packages, e.g. spf, dkim, dmarc, iprev. their
dnssec status is added to the Received message headers for incoming email.
but the main reason to add dnssec was for implementing dane. with dane, the
verification of tls certificates can be done through certificates/public keys
published in dns (in the tlsa records). this only makes sense (is trustworthy)
if those dns records can be verified to be authentic.
mox now applies dane to delivering messages over smtp. mox already implemented
mta-sts for webpki/pkix-verification of certificates against the (large) pool
of CA's, and still enforces those policies when present. but it now also checks
for dane records, and will verify those if present. if dane and mta-sts are
both absent, the regular opportunistic tls with starttls is still done. and the
fallback to plaintext is also still done.
mox also makes it easy to setup dane for incoming deliveries, so other servers
can deliver with dane tls certificate verification. the quickstart now
generates private keys that are used when requesting certificates with acme.
the private keys are pre-generated because they must be static and known during
setup, because their public keys must be published in tlsa records in dns.
autocert would generate private keys on its own, so had to be forked to add the
option to provide the private key when requesting a new certificate. hopefully
upstream will accept the change and we can drop the fork.
with this change, using the quickstart to setup a new mox instance, the checks
at internet.nl result in a 100% score, provided the domain is dnssec-signed and
the network doesn't have any issues.
2023-10-10 13:09:35 +03:00
|
|
|
# golang.org/x/sys v0.13.0
|
2023-01-30 16:27:06 +03:00
|
|
|
## explicit; go 1.17
|
|
|
|
|
golang.org/x/sys/cpu
|
|
|
|
|
golang.org/x/sys/execabs
|
|
|
|
|
golang.org/x/sys/unix
|
|
|
|
|
golang.org/x/sys/windows
|
2023-09-20 17:52:18 +03:00
|
|
|
# golang.org/x/text v0.13.0
|
2023-01-30 16:27:06 +03:00
|
|
|
## explicit; go 1.17
|
2023-07-28 23:15:23 +03:00
|
|
|
golang.org/x/text/encoding
|
|
|
|
|
golang.org/x/text/encoding/charmap
|
|
|
|
|
golang.org/x/text/encoding/ianaindex
|
|
|
|
|
golang.org/x/text/encoding/internal
|
|
|
|
|
golang.org/x/text/encoding/internal/identifier
|
|
|
|
|
golang.org/x/text/encoding/japanese
|
|
|
|
|
golang.org/x/text/encoding/korean
|
|
|
|
|
golang.org/x/text/encoding/simplifiedchinese
|
|
|
|
|
golang.org/x/text/encoding/traditionalchinese
|
|
|
|
|
golang.org/x/text/encoding/unicode
|
|
|
|
|
golang.org/x/text/internal/utf8internal
|
|
|
|
|
golang.org/x/text/runes
|
2023-01-30 16:27:06 +03:00
|
|
|
golang.org/x/text/secure/bidirule
|
|
|
|
|
golang.org/x/text/transform
|
|
|
|
|
golang.org/x/text/unicode/bidi
|
|
|
|
|
golang.org/x/text/unicode/norm
|
implement dnssec-awareness throughout code, and dane for incoming/outgoing mail delivery
the vendored dns resolver code is a copy of the go stdlib dns resolver, with
awareness of the "authentic data" (i.e. dnssec secure) added, as well as support
for enhanced dns errors, and looking up tlsa records (for dane). ideally it
would be upstreamed, but the chances seem slim.
dnssec-awareness is added to all packages, e.g. spf, dkim, dmarc, iprev. their
dnssec status is added to the Received message headers for incoming email.
but the main reason to add dnssec was for implementing dane. with dane, the
verification of tls certificates can be done through certificates/public keys
published in dns (in the tlsa records). this only makes sense (is trustworthy)
if those dns records can be verified to be authentic.
mox now applies dane to delivering messages over smtp. mox already implemented
mta-sts for webpki/pkix-verification of certificates against the (large) pool
of CA's, and still enforces those policies when present. but it now also checks
for dane records, and will verify those if present. if dane and mta-sts are
both absent, the regular opportunistic tls with starttls is still done. and the
fallback to plaintext is also still done.
mox also makes it easy to setup dane for incoming deliveries, so other servers
can deliver with dane tls certificate verification. the quickstart now
generates private keys that are used when requesting certificates with acme.
the private keys are pre-generated because they must be static and known during
setup, because their public keys must be published in tlsa records in dns.
autocert would generate private keys on its own, so had to be forked to add the
option to provide the private key when requesting a new certificate. hopefully
upstream will accept the change and we can drop the fork.
with this change, using the quickstart to setup a new mox instance, the checks
at internet.nl result in a 100% score, provided the domain is dnssec-signed and
the network doesn't have any issues.
2023-10-10 13:09:35 +03:00
|
|
|
# golang.org/x/tools v0.13.0
|
2023-01-30 16:27:06 +03:00
|
|
|
## explicit; go 1.18
|
|
|
|
|
golang.org/x/tools/go/gcexportdata
|
|
|
|
|
golang.org/x/tools/go/internal/packagesdriver
|
|
|
|
|
golang.org/x/tools/go/packages
|
2023-08-15 11:58:01 +03:00
|
|
|
golang.org/x/tools/go/types/objectpath
|
2023-01-30 16:27:06 +03:00
|
|
|
golang.org/x/tools/internal/event
|
|
|
|
|
golang.org/x/tools/internal/event/core
|
|
|
|
|
golang.org/x/tools/internal/event/keys
|
|
|
|
|
golang.org/x/tools/internal/event/label
|
2023-08-15 11:58:01 +03:00
|
|
|
golang.org/x/tools/internal/event/tag
|
2023-03-06 10:35:57 +03:00
|
|
|
golang.org/x/tools/internal/gcimporter
|
2023-01-30 16:27:06 +03:00
|
|
|
golang.org/x/tools/internal/gocommand
|
|
|
|
|
golang.org/x/tools/internal/packagesinternal
|
2023-03-06 10:35:57 +03:00
|
|
|
golang.org/x/tools/internal/pkgbits
|
|
|
|
|
golang.org/x/tools/internal/tokeninternal
|
2023-01-30 16:27:06 +03:00
|
|
|
golang.org/x/tools/internal/typeparams
|
|
|
|
|
golang.org/x/tools/internal/typesinternal
|
|
|
|
|
# google.golang.org/protobuf v1.28.1
|
|
|
|
|
## explicit; go 1.11
|
|
|
|
|
google.golang.org/protobuf/encoding/prototext
|
|
|
|
|
google.golang.org/protobuf/encoding/protowire
|
|
|
|
|
google.golang.org/protobuf/internal/descfmt
|
|
|
|
|
google.golang.org/protobuf/internal/descopts
|
|
|
|
|
google.golang.org/protobuf/internal/detrand
|
|
|
|
|
google.golang.org/protobuf/internal/encoding/defval
|
|
|
|
|
google.golang.org/protobuf/internal/encoding/messageset
|
|
|
|
|
google.golang.org/protobuf/internal/encoding/tag
|
|
|
|
|
google.golang.org/protobuf/internal/encoding/text
|
|
|
|
|
google.golang.org/protobuf/internal/errors
|
|
|
|
|
google.golang.org/protobuf/internal/filedesc
|
|
|
|
|
google.golang.org/protobuf/internal/filetype
|
|
|
|
|
google.golang.org/protobuf/internal/flags
|
|
|
|
|
google.golang.org/protobuf/internal/genid
|
|
|
|
|
google.golang.org/protobuf/internal/impl
|
|
|
|
|
google.golang.org/protobuf/internal/order
|
|
|
|
|
google.golang.org/protobuf/internal/pragma
|
|
|
|
|
google.golang.org/protobuf/internal/set
|
|
|
|
|
google.golang.org/protobuf/internal/strs
|
|
|
|
|
google.golang.org/protobuf/internal/version
|
|
|
|
|
google.golang.org/protobuf/proto
|
|
|
|
|
google.golang.org/protobuf/reflect/protodesc
|
|
|
|
|
google.golang.org/protobuf/reflect/protoreflect
|
|
|
|
|
google.golang.org/protobuf/reflect/protoregistry
|
|
|
|
|
google.golang.org/protobuf/runtime/protoiface
|
|
|
|
|
google.golang.org/protobuf/runtime/protoimpl
|
|
|
|
|
google.golang.org/protobuf/types/descriptorpb
|
|
|
|
|
google.golang.org/protobuf/types/known/timestamppb
|
2023-09-23 13:05:40 +03:00
|
|
|
# rsc.io/qr v0.2.0
|
|
|
|
|
## explicit
|
|
|
|
|
rsc.io/qr
|
|
|
|
|
rsc.io/qr/coding
|
|
|
|
|
rsc.io/qr/gf256
|