* caddyhttp: Honor grace period in background
This avoids blocking during config reloads.
* Don't quit process until servers shut down
* Make tests more likely to pass on fast CI (#5045)
* caddyhttp: Even faster shutdowns
Simultaneously shut down all HTTP servers, rather than one at a time.
In practice there usually won't be more than 1 that lingers. But this
code ensures that they all Shutdown() in their own goroutine
and then we wait for them at the end (if exiting).
We also wait for them to start up so we can be fairly confident the
shutdowns have begun; i.e. old servers no longer
accepting new connections.
* Fix comment typo
* Pull functions out of loop, for readability
Ideally I'd just remove the parameter to caddy.Context.Logger(), but
this would break most Caddy plugins.
Instead, I'm making it variadic and marking it as partially deprecated.
In the future, I might completely remove the parameter once most
plugins have updated.
* fix encode handler header manipulation
also avoid implementing ReadFrom because it breaks when io.Copied to directly
* strconv.Itoa should be tried as a last resort
WriteHeader during Close
* feat: Multiple 'to' upstreams in reverse-proxy cmd
* Repeat --to for multiple upstreams, rather than comma-separating in a single flag
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
* caddyhttp: Explicitly disallow multiple regexp matchers
Fix#5028
Since the matchers would overwrite eachother, we should error out to tell the user their config doesn't make sense.
* Update modules/caddyhttp/matchers.go
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
Doing so allows for splice/sendfile optimizations when available.
Fixes#4731
Co-authored-by: flga <flga@users.noreply.github.com>
Co-authored-by: Matthew Holt <mholt@users.noreply.github.com>
* fileserver: Support glob expansion in file matcher
* Fix tests
* Fix bugs and tests
* Attempt Windows fix, sigh
* debug Windows, WIP
* Continue debugging Windows
* Another attempt at Windows
* Plz Windows
* Cmon...
* Clean up, hope I didn't break anything
* caddyhttp: Support sending HTTP 103 Early Hints
This adds support for early hints in the static_response handler.
* caddyhttp: Don't record 1xx responses
* reverseproxy: Close hijacked conns on reload/quit
We also send a Close control message to both ends of
WebSocket connections. I have tested this many times in
my dev environment with consistent success, although
the variety of scenarios was limited.
* Oops... actually call Close() this time
* CloseMessage --> closeMessage
Co-authored-by: Francis Lavoie <lavofr@gmail.com>
* Use httpguts, duh
* Use map instead of sync.Map
Co-authored-by: Francis Lavoie <lavofr@gmail.com>
* core: Refactor listeners; use SO_REUSEPORT on Unix
Just an experiment for now
* Fix lint by logging error
* TCP Keepalive configuration (#4865)
* initial attempt at TCP Keepalive configuration
* core: implement tcp-keepalive for linux
* move canSetKeepAlive interface
* Godoc for keepalive server parameter
* handle return values
* log keepalive errors
* Clean up after bad merge
* Merge in pluggable network types
From 1edc1a45e3
* Slight refactor, fix from recent merge conflict
Co-authored-by: Karmanyaah Malhotra <karmanyaah.gh@malhotra.cc>
* break up code and use lazy reading and pool bufio.Writer
* close underlying connection when operation failed
* allocate bufWriter and streamWriter only once
* refactor record writing
* rebase from master
* handle err
* Fix type assertion
Also reduce some duplication
* Refactor client and clientCloser for logging
Should reduce allocations
* Minor cosmetic adjustments; apply Apache license
* Appease the linter
Co-authored-by: Matthew Holt <mholt@users.noreply.github.com>
* added the httpError function into the document
* Update templates.go
* Update templates.go
* Fix gofmt
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
Until now, the vars matcher has unintentionally lacked parity with the
map directive: the destination placeholders of the map directive would
be expressed as placeholders, i.e. {foo}. But the vars matcher would
not use { }: vars foo value
This looked weird, and was confusing, since it implied that the key
could be dynamic, which doesn't seem helpful here.
I think this is a proper bug fix, since we're not used to accessing
placeholders literally without { } in the Caddyfile.
* core: Plugins can register listener networks
This can be useful for custom listeners.
This feature/API is experimental and may change!
* caddyhttp: Expose server listeners
This allows users to, for example, get upstreams from multiple SRV
endpoints in order (such as primary and secondary clusters).
Also, gofmt went to town on the comments, sigh
Errors returned from the DecisionFunc (whether to get a cert on-demand)
are used as a signal whether to allow a cert or not; *any* error
will forbid cert issuance.
We bubble up the error all the way to the caller, but that caller is the
Go standard library which might gobble it up.
Now we explicitly log connection errors so sysadmins can
ensure their ask endpoints are working.
Thanks to our sponsor AppCove for reporting this!
* fileserver: Support virtual file systems (close#3720)
This change replaces the hard-coded use of os.Open() and os.Stat() with
the use of the new (Go 1.16) io/fs APIs, enabling virtual file systems.
It introduces a new module namespace, caddy.fs, for such file systems.
Also improve documentation for the file server. I realized it was one of
the first modules written for Caddy 2, and the docs hadn't really been
updated since!
* Virtualize FS for file matcher; minor tweaks
* Fix tests and rename dirFS -> osFS
(Since we do not use a root directory, it is dynamic.)
Hahaha this is the ultimate "I have no idea what I'm doing" commit but it
compiles and the tests pass and I declare victory!
... probably broke something, should be tested more.
It is nice that the protobuf dependency becomes indirect now.
* reverseproxy: Implement retry count, alternative to try_duration
* Add Caddyfile support for `retry_match`
* Refactor to deduplicate matcher parsing logic
* Fix lint
See https://caddy.community/t/using-forward-auth-and-writing-my-own-authenticator-in-php/16410, apparently it didn't work when `copy_headers` wasn't used. This is because we were skipping adding a handler to the routes in the "good response handler", but this causes the logic in `reverseproxy.go` to ignore the response handler since it's empty. Instead, we can just always put in the `header` handler, even with an empty `Set` operation, it's just a no-op, but it fixes that condition in the proxy code.
* Make reverse proxy TLS server name replaceable for SNI upstreams.
* Reverted previous TLS server name replacement, and implemented thread safe version.
* Move TLS servername replacement into it's own function
* Moved SNI servername replacement into httptransport.
* Solve issue when dynamic upstreams use wrong protocol upstream.
* Revert previous commit.
Old commit was: Solve issue when dynamic upstreams use wrong protocol upstream.
Id: 3c9806ccb6
* Added SkipTLSPorts option to http transport.
* Fix typo in test config file.
* Rename config option as suggested by Matt
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
* Update code to match renamed config option.
* Fix typo in config option name.
* Fix another typo that I missed.
* Tests not completing because of apparent wrong ordering of options.
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
* Make reverse proxy TLS server name replaceable for SNI upstreams.
* Reverted previous TLS server name replacement, and implemented thread safe version.
* Move TLS servername replacement into it's own function
* Moved SNI servername replacement into httptransport.
* Solve issue when dynamic upstreams use wrong protocol upstream.
* Revert previous commit.
Old commit was: Solve issue when dynamic upstreams use wrong protocol upstream.
Id: 3c9806ccb6
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
In v2.5.0, upstream health was fixed such that whether an upstream is
considered healthy or not is mostly up to each individual handler's
config. Since "healthy" is an opinion, it is not a global value.
I unintentionally left in the "healthy" field in the API endpoint for
checking upstreams, and it is now misleading (see #4792).
However, num_requests and fails remains, so health can be determined by
the API client, rather than having it be opaquely (and unhelpfully)
determined for the client.
If we do restore this value later on, it'd need to be replicated once
per reverse_proxy handler according to their individual configs.
* reverseproxy: Improve hashing LB policies with HRW
Previously, if a list of upstreams changed, hash-based LB policies
would be greatly affected because the hash relied on the position of
upstreams in the pool. Highest Random Weight or "rendezvous" hashing
is apparently robust to pool changes. It runs in O(n) instead of
O(log n), but n is very small usually.
* Fix bug and update tests
* caddypki: Load intermediate for signing on-the-fly
Fixes#4517
Big thanks to @maraino for adding an API in `smallstep/certificates` so that we can fix this
* Debug log
* Trying a hunch, does it need to be a pointer receiver?
* Clarify pointer receiver
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
* reverseproxy: Sync up `handleUpgradeResponse` with stdlib
I had left this as a TODO for when we bump to minimum 1.17, but I should've realized it was under `internal` so it couldn't be used directly.
Copied the functions we needed for parity. Hopefully this is ok!
* Add tests and fix godoc comments
Co-authored-by: Matthew Holt <mholt@users.noreply.github.com>
Includes several breaking changes; code base updated accordingly.
- Added lots of context arguments
- Use fs.ErrNotExist
- Rename ACMEManager -> ACMEIssuer; CertificateManager -> Manager
* caddyfile: Support for raw token values, improve `map`, `expression`
* Applied code review comments
* Rename RawVal to ValRaw
Co-authored-by: Matthew Holt <mholt@users.noreply.github.com>
* reverseproxy: New `copy_response` handler for `handle_response` routes
Followup to #4298 and #4388.
This adds a new `copy_response` handler which may only be used in `reverse_proxy`'s `handle_response` routes, which can be used to actually copy the proxy response downstream.
Previously, if `handle_response` was used (with routes, not the status code mode), it was impossible to use the upstream's response body at all, because we would always close the body, expecting the routes to write a new body from scratch.
To implement this, I had to refactor `h.reverseProxy()` to move all the code that came after the `HandleResponse` loop into a new function. This new function `h.finalizeResponse()` takes care of preparing the response by removing extra headers, dealing with trailers, then copying the headers and body downstream.
Since basically what we want `copy_response` to do is invoke `h.finalizeResponse()` at a configurable point in time, we need to pass down the proxy handler, the response, and some other state via a new `req.WithContext(ctx)`. Wrapping a new context is pretty much the only way we have to jump a few layers in the HTTP middleware chain and let a handler pick up this information. Feels a bit dirty, but it works.
Also fixed a bug with the `http.reverse_proxy.upstream.duration` placeholder, it always had the same duration as `http.reverse_proxy.upstream.latency`, but the former was meant to be the time taken for the roundtrip _plus_ copying/writing the response.
* Delete the "Content-Length" header if we aren't copying
Fixes a bug where the Content-Length will mismatch the actual bytes written if we skipped copying the response, so we get a message like this when using curl:
```
curl: (18) transfer closed with 18 bytes remaining to read
```
To replicate:
```
{
admin off
debug
}
:8881 {
reverse_proxy 127.0.0.1:8882 {
@200 status 200
handle_response @200 {
header Foo bar
}
}
}
:8882 {
header Content-Type application/json
respond `{"hello": "world"}` 200
}
```
* Implement `copy_response_headers`, with include/exclude list support
* Apply suggestions from code review
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
* opentelemetry: create a new module
* fix imports
* fix test
* Update modules/caddyhttp/opentelemetry/README.md
Co-authored-by: Dave Henderson <dhenderson@gmail.com>
* Update modules/caddyhttp/opentelemetry/README.md
Co-authored-by: Dave Henderson <dhenderson@gmail.com>
* Update modules/caddyhttp/opentelemetry/README.md
Co-authored-by: Dave Henderson <dhenderson@gmail.com>
* Update modules/caddyhttp/opentelemetry/tracer.go
Co-authored-by: Dave Henderson <dhenderson@gmail.com>
* rename error ErrUnsupportedTracesProtocol
* replace spaces with tabs in the test data
* Update modules/caddyhttp/opentelemetry/README.md
Co-authored-by: Francis Lavoie <lavofr@gmail.com>
* Update modules/caddyhttp/opentelemetry/README.md
Co-authored-by: Francis Lavoie <lavofr@gmail.com>
* replace spaces with tabs in the README.md
* use default values for a propagation and exporter protocol
* set http attributes with helper
* simplify code
* Cleanup modules/caddyhttp/opentelemetry/README.md
Co-authored-by: Dave Henderson <dhenderson@gmail.com>
* Update link in README.md
Co-authored-by: Dave Henderson <dhenderson@gmail.com>
* Update documentation in README.md
Co-authored-by: Dave Henderson <dhenderson@gmail.com>
* Update link to naming spec in README.md
Co-authored-by: Dave Henderson <dhenderson@gmail.com>
* Rename module from opentelemetry to tracing
Co-authored-by: Dave Henderson <dhenderson@gmail.com>
* Rename span_name to span
Co-authored-by: Dave Henderson <dhenderson@gmail.com>
* Rename span_name to span
Co-authored-by: Dave Henderson <dhenderson@gmail.com>
* Simplify otel resource creation
Co-authored-by: Dave Henderson <dhenderson@gmail.com>
* handle extra attributes
Co-authored-by: Dave Henderson <dhenderson@gmail.com>
* update go.opentelemetry.io/otel/semconv to 1.7.0
Co-authored-by: Dave Henderson <dhenderson@gmail.com>
* update go.opentelemetry.io/otel version
* remove environment variable handling
* always use tracecontext,baggage as propagators
* extract tracer name into variable
* rename OpenTelemetry to Tracing
* simplify resource creation
* update go.mod
* rename package from opentelemetry to tracing
* cleanup tests
* update Caddyfile example in README.md
* update README.md
* fix test
* fix module name in README.md
* fix module name in README.md
* change names in README.md and tests
* order imports
* remove redundant tests
* Update documentation README.md
Co-authored-by: Dave Henderson <dhenderson@gmail.com>
* Fix grammar
Co-authored-by: Dave Henderson <dhenderson@gmail.com>
* Update comments
Co-authored-by: Dave Henderson <dhenderson@gmail.com>
* Update comments
Co-authored-by: Dave Henderson <dhenderson@gmail.com>
* update go.sum
* update go.sum
* Add otelhttp instrumentation, update OpenTelemetry libraries.
* Use otelhttp instrumentation for instrumenting HTTP requests.
This change uses context.WithValue to inject the next handler into the
request context via a "nextCall" carrier struct, and pass it on to a
standard Go HTTP handler returned by otelhttp.NewHandler. The
underlying handler will extract the next handler from the context,
call it and pass the returned error to the carrier struct.
* use zap.Error() for the error log
* remove README.md
* update dependencies
* clean up the code
* change comment
* move serveHTTP method from separate file
* add syntax to the UnmarshalCaddyfile comment
* go import the file
* admin: Write proper status on invalid requests (#4569) (fix#4561)
* update dependencies
Co-authored-by: Dave Henderson <dhenderson@gmail.com>
Co-authored-by: Francis Lavoie <lavofr@gmail.com>
Co-authored-by: Vibhav Pant <vibhavp@gmail.com>
Co-authored-by: Alok Naushad <alokme123@gmail.com>
Co-authored-by: Cedric Ziel <cedric@cedric-ziel.com>
* Add a override_domain option to allow DNS chanllenge delegation
CNAME can be used to delegate answering the chanllenge to another DNS
zone. One usage is to reduce the exposure of the DNS credential [1].
Based on the discussion in caddy/certmagic#160, we are adding an option
to allow the user explicitly specify the domain to delegate, instead of
following the CNAME chain.
This needs caddy/certmagic#160.
* rename override_domain to dns_challenge_override_domain
* Update CertMagic; fix spelling
Co-authored-by: Matthew Holt <mholt@users.noreply.github.com>
* reverseproxy: Begin refactor to enable dynamic upstreams
Streamed here: https://www.youtube.com/watch?v=hj7yzXb11jU
* Implement SRV and A/AAA upstream sources
Also get upstreams at every retry loop iteration instead of just once
before the loop. See #4442.
* Minor tweaks from review
* Limit size of upstreams caches
* Add doc notes deprecating LookupSRV
* Provision dynamic upstreams
Still WIP, preparing to preserve health checker functionality
* Rejigger health checks
Move active health check results into handler-specific Upstreams.
Improve documentation regarding health checks and upstreams.
* Deprecation notice
* Add Caddyfile support, use `caddy.Duration`
* Interface guards
* Implement custom resolvers, add resolvers to http transport Caddyfile
* SRV: fix Caddyfile `name` inline arg, remove proto condition
* Use pointer receiver
* Add debug logs
Co-authored-by: Francis Lavoie <lavofr@gmail.com>
* reverseproxy: Make shallow-ish clone of the request
* Refactor request cloning into separate function
Co-authored-by: Matthew Holt <mholt@users.noreply.github.com>
If .ts.net domains are explicitly added to config,
don't try to manage a cert for them (it will fail, and our
implicit Tailscale module will
get those certs at run-time).
Remove /pki/certificates/<ca> endpoint and split into two endpoints:
- GET /pki/ca/<id> to get CA info and certs in JSON format
- GET /pki/ca/<id>/certificates to get cert in PEM chain
* admin: Implement /pki/certificates/<id> API
* pki: Lower "skip_install_trust" log level to INFO
See https://github.com/caddyserver/caddy/issues/4058#issuecomment-976132935
It's not necessary to warn about this, because this was an option explicitly configured by the user. Still useful to log, but we don't need to be so loud about it.
* cmd: Export functions needed for PKI app, return API response to caller
* pki: Rewrite `caddy trust` command to use new admin endpoint instead
* pki: Rewrite `caddy untrust` command to support using admin endpoint
* Refactor cmd and pki packages for determining admin API endpoint
* Update matchers.go
* Update matchers.go
* implementation of zone_id handling
* last changes in zone handling
* give return true values instead of bool
* Apply suggestions from code review
Co-authored-by: Francis Lavoie <lavofr@gmail.com>
* changes as suggested
* Apply suggestions from code review
Co-authored-by: Francis Lavoie <lavofr@gmail.com>
* Update matchers.go
* shortened the Match function
* changed mazcher handling
* Update matchers.go
* delete space
Co-authored-by: Francis Lavoie <lavofr@gmail.com>
Huge thank-you to Tailscale (https://tailscale.com) for making this change possible!
This is a great feature for Caddy and Tailscale is a great fit for a standard implementation.
* caddytls: GetCertificate modules; Tailscale
* Caddyfile support for get_certificate
Also fix AP provisioning in case of empty subject list (persist loaded
module on struct, much like Issuers, to surive reprovisioning).
And implement start of HTTP cert getter, still WIP.
* Update modules/caddytls/automation.go
Co-authored-by: Francis Lavoie <lavofr@gmail.com>
* Use tsclient package, check status for name
* Implement HTTP cert getter
And use reuse CertMagic's PEM functions for private keys.
* Remove cache option from Tailscale getter
Tailscale does its own caching and we don't need the added complexity...
for now, at least.
* Several updates
- Option to disable cert automation in auto HTTPS
- Support multiple cert managers
- Remove cache feature from cert manager modules
- Minor improvements to auto HTTPS logging
* Run go mod tidy
* Try to get certificates from Tailscale implicitly
Only for domains ending in .ts.net.
I think this is really cool!
Co-authored-by: Francis Lavoie <lavofr@gmail.com>
The TestFileListing test in tplcontext_test has one test that verifies
if directory traversal is not happening. The context root is set to
'/tmp' and then it tries to open '../../../../../etc', which gets
normalized to '/tmp/etc'.
The test then expects an error to be returned, assuming that '/tmp/etc'
does not exist on the system. When it does exist, it results in a test
failure:
```
--- FAIL: TestFileListing (0.00s)
tplcontext_test.go:422: Test 4: Expected error but had none
FAIL
FAIL
github.com/caddyserver/caddy/v2/modules/caddyhttp/templates 0.042s
```
Instead of using '/tmp' as root, use a dedicated directory created with
`os.MkdirTemp()` instead. That way, we know that the directory is empty.
* caddyhttp: Redirect HTTP requests on the HTTPS port to https://
* Apply suggestions from code review
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
This is a followup to #4407, in response to a report on the forums: https://caddy.community/t/php-fastcgi-phishing-redirection/14542
Turns out that doing `TrimRight` to remove trailing dots, _before_ cleaning the path, will cause double-dots at the end of the path to not be cleaned away as they should. We should instead remove the dots _after_ cleaning.
* caddyhttp: Enhance vars matcher
Enable "or" logic for multiple values.
Fall back to checking placeholders if not a var name.
* Fix tests (thanks @mohammed90 !)
* fastcgi: Fix a TODO, prevent zap using reflection for logging env
* Update modules/caddyhttp/reverseproxy/fastcgi/fastcgi.go
Co-authored-by: Mohammed Al Sahaf <msaa1990@gmail.com>
Co-authored-by: Mohammed Al Sahaf <msaa1990@gmail.com>
* reverseproxy: Adjust defaults, document defaults
Related to some of the issues in https://github.com/caddyserver/caddy/issues/4245, a complaint about the proxy transport defaults not being properly documented in https://caddy.community/t/default-values-for-directives/14254/6.
- Dug into the stdlib to find the actual defaults for some of the timeouts and buffer limits, documenting them in godoc so the JSON docs get them next release.
- Moved the keep-alive and dial-timeout defaults from `reverseproxy.go` to `httptransport.go`. It doesn't make sense to set defaults in the proxy, because then any time the transport is configured with non-defaults, the keep-alive and dial-timeout defaults are lost!
- Sped up the dial timeout from 10s to 3s, in practice it rarely makes sense to wait a whole 10s for dialing. A shorter timeout helps a lot with the load balancer retries, so using something lower helps with user experience.
* reverseproxy: Make keepalive interval configurable via Caddyfile
* fastcgi: DialTimeout default for fastcgi transport too
Fixes#4428
It's best to still log handler errors at debug level so that they're hidden by default, but still accessible if additional details are necessary.
This makes it easier for users to find the default browse template if they
want to create a custom template based on that. It also makes it easier to
view the template with proper syntax highlighting.
* caddyhttp: Sanitize scheme and host on incoming requests
* reverseproxy: Sanitize the URL scheme and host before proxying
* Apply suggestions from code review
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
* Update tplcontext.go
Add {{ render "/path/to/file.ext" $data }} via funcRender
* Update tplcontext.go
* Refactor funcInclude, add funcImport to enable {{block}} and {{template}}
* Fix funcImport return of nil showing up in html
* Update godocs for and
* Add tests for funcInclude
* Add tests for funcImport
* os.RemoveAll -> os.Remove for TestFuncInclude and TestFuncImport
Related to (closed) Issue #2094 on template inheritance. This PR adds a new function called "import" which works like "include", except it only takes one argument and passes it to the referenced file to be used as "." in that file.
* Update tplcontext.go
Add {{ render "/path/to/file.ext" $data }} via funcRender
* Update tplcontext.go
* Refactor funcInclude, add funcImport to enable {{block}} and {{template}}
* Fix funcImport return of nil showing up in html
* Update godocs for and
* caddyhttp: Add support for triggering errors from `try_files`
* caddyhttp: Use vars instead of placeholders/replacer for matcher errors
* caddyhttp: Add comment for matcher error var key
* encode: ignore flushing until after first write (fix#4314)
The first write will determine if encoding has to be done and will add an Content-Encoding. Until then Flushing has to be delayed so the Content-Encoding header can be added before headers and status code is written. (A passthrough flush would write header and status code)
* Update modules/caddyhttp/encode/encode.go
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
From reading through the code, I think this code path is now obsoleted by the changes made in https://github.com/caddyserver/caddy/pull/4266.
Basically, `h.flushInterval()` will set the flush interval to `-1` if we're in a bi-directional stream, and the recent PR ensured that `h.copyResponse()` properly flushes headers immediately when the flush interval is non-zero. So now there should be no need to call Flush before calling `h.copyResponse()`.
This commit fixes the `sortByNameDirFirst` variable inside fileserver to
match what browse's default template has.
Co-authored-by: Francis Lavoie <lavofr@gmail.com>
* Tweak compression settings
zstd: Limit window sizes to 128K to keep memory in control both server and client size.
zstd: Write 0 length frames. This may be needed for compatibility.
zstd: Create fewer encoders. Small memory improvement.
gzip: Allow -2 (Huffman only) and -3 (stateless) compression modes.
* Update modules/caddyhttp/encode/zstd/zstd.go
Update docs.
Co-authored-by: Francis Lavoie <lavofr@gmail.com>
Co-authored-by: Francis Lavoie <lavofr@gmail.com>
This is the more correct implementation of 23dadc0d86 (#4179)... I think. This commit effectively undoes the revert in 8848df9c5d, but with corrections to the logic.
We *do* need to use the original request path (the path the browser knows) for redirects, since they are external, and rewrites are only internal.
However, if the path was rewritten to a non-canonical path, we should not redirect to canonicalize that, since rewrites are intentional by the site owner. Canonicalizing the path involves modifying only the suffix (base element, or filename) of the path. Thus, if a rewrite involves only the prefix (like how handle_path strips a path prefix), then we can (hopefully!) safely redirect using the original URI since the filename was not rewritten.
So basically, if rewrites modify the filename, we should not canonicalize those requests. If rewrites only modify another part of the path (commonly a prefix), we should be OK to redirect.
Templates are parsed at request-time (like they are in the templates middleware) to allow live changes to the template while the server is running. Fixes race condition.
Also refactored use of a buffer so a buffer put back in the pool will not continue to be used (written to client) in the meantime.
A couple of benchmarks removed due to refactor, which is fine, since we know pooling helps here.
Also split the Caddyfile subdirective keepalive_idle_conns into two properties so the conns and conns_per_host can be set separately.
This is technically a breaking change, but probably anyone who this breaks already had a broken config anyway, and silently fixing it won't help them fix their configs.
* logging: Implement dial timeout for net writer (fix#4083)
* Limit how often redials are attempted
This should cause dial blocking to occur only once every 10 seconds at most, but it also means the logger connection might be down for up to 10 seconds after it comes back online; oh well. We shouldn't block for DialTimeout at every single log emission.
* Clarify offline behavior
Turns out this was an oversight, we assumed we could use `{http.response.header.*}` but that doesn't work because those are grabbed from the response writer, and we haven't copied any headers into the response writer yet.
So the fix is to set all the response headers into the replacer at a new namespace before running the handlers.
This adds the `{http.reverse_proxy.header.*}` replacer.
See https://caddy.community/t/empty-http-response-header-x-accel-redirect/12447
* caddyfile(formatter): fix nesting not decrementing
This is an extremely weird edge-case where if you had a environment variable {}
on one line, a comment on the next line, and the closing of the block on the
following line; the rest of the Caddyfile would be indented further than it
should've been.
ref; https://github.com/matthewpi/vscode-caddyfile-support/issues/13
* run gofmt
* fmt: better way of handling edge case
Followup to #4150, #4151 /cc @ueffel @polarathene
After a bit of discussion with @mholt, we decided to remove `prefer` as a subdirective and just go with using the order implicitly always. Simpler config, simpler docs, etc.
Effectively changes 7776471 and reverts a small part of f35a7fa.
* caddyhttp: Fix fallback for the error handler chain
The fix I went with in the end (after realizing some mistaken assumptions in #4131) is to just make the routes fall back to errorEmptyHandler instead of the non-error empty handler, if Terminal is true, making the routes error-aware. Ultimately this was probably just an oversight when errors was implemented at some point in the early betas of v2.
See https://caddy.community/t/problem-with-basicauth-handle-errors/12243/9 for context.
* Revert "caddyhttp: Fix fallback for the error handler chain"
This reverts commit 95b6ac44a6.
* caddyhttp: Fix via `routes.go`
* fileserver: Fix `file` matcher with empty `try_files`
Fixes https://github.com/caddyserver/caddy/issues/4146
If `TryFiles` is empty, we fill it with `r.URL.Path`. In this case, this is `/`. Then later, in `prepareFilePath()`, we run the replacer (which turns `{path}` into `/` at that point) but `file` remains the original value (and the placeholder is still the placeholder there).
So then `strings.HasSuffix(file, "/")` will be `false` for the placeholder, but `true` for the empty `TryFiles` codepath, because `file` was `/` due to being set to the actual request value beforehand.
This means that `suffix` becomes `//` in that case, so after `sanitizedPathJoin`, it becomes `./`, so `strictFileExists`'s `strings.HasSuffix(file, separator)` codepath will return true.
I think we should change the `m.TryFiles == nil` codepath to `m.TryFiles = []string{"{http.request.uri.path}"}` for consistency. (And maybe consider hoisting this to `Provision` cause there's no point doing this on every request). I don't think this "optimization" of directly using `r.URL.Path` is so valuable, cause it causes this edgecase with directories.
* Update modules/caddyhttp/fileserver/matcher.go
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
* reverseproxy: Add `handle_response` blocks to `reverse_proxy` (#3710)
* reverseproxy: complete handle_response test
* reverseproxy: Change handle_response matchers to use named matchers
reverseproxy: Add support for changing status code
* fastcgi: Remove obsolete TODO
We already have d.Err("transport already specified") in the reverse_proxy parsing code which covers this case
* reverseproxy: Fix support for "4xx" type status codes
* Apply suggestions from code review
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
* caddyhttp: Reorganize response matchers
* reverseproxy: Reintroduce caddyfile.Unmarshaler
* reverseproxy: Add comment mentioning Finalize should be called
Co-authored-by: Maxime Soulé <btik-git@scoubidou.com>
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
Below is the report using `benchstat` and cmd:
`go test -run=BenchmarkHeaderREMatcher -bench=BenchmarkHeaderREMatcher -benchmem -count=10`
```
name old time/op new time/op delta
HeaderREMatcher-16 869ns ± 1% 658ns ± 0% -24.29% (p=0.000 n=10+10)
name old alloc/op new alloc/op delta
HeaderREMatcher-16 144B ± 0% 112B ± 0% -22.22% (p=0.000 n=10+10)
name old allocs/op new allocs/op delta
HeaderREMatcher-16 7.00 ± 0% 5.00 ± 0% -28.57% (p=0.000 n=10+10)
```
* caddyhttp: reverseproxy: fix hash selection policy
Fixes: #4135
Test: go test './...' -count=1
* caddyhttp: reverseproxy: add test to catch #4135
If you revert the last commit, the test will fail.
An idea that came up in https://caddy.community/t/save-internally-issued-wildcard-certificate-in-consul/11740, this a simple module that might be useful for anyone who uses storage modules that aren't filesystem, to let them load certs/keys externally issued for use by Caddy.
Bit goofy, since we need to fetch the certmagic.Storage during provisioning, it needs a wrapping struct instead of just being an array like `load_files`.
Future work might involve adding Caddyfile support via a subdirective of the `tls` directive maybe?
After reading a question about the `handle_response` feature of `reverse_proxy`, I realized that we didn't have a way of serving an arbitrary file with a status code other than 200. This is an issue in situations where you want to serve a custom error page in routes that are not errors, like the aforementioned `handle_response`, where you may want to retain the status code returned by the proxy but write a response with content from a file.
This feature is super simple, basically if a status code is configured (can be a status code number, or a placeholder string) then that status will be written out before serving the file - if we write the status code first, then the stdlib won't write its own (only the first HTTP status header wins).
* encode: implement prefer setting
* encode: minimum_length configurable via caddyfile
* encode: configurable content-types which to encode
* file_server: support precompressed files
* encode: use ReponseMatcher for conditional encoding of content
* linting error & documentation of encode.PrecompressedOrder
* encode: allow just one response matcher
also change the namespace of the encoders back, I accidently changed to precompressed >.>
default matchers include a * to match to any charset, that may be appended
* rounding of the PR
* added integration tests for new caddyfile directives
* improved various doc strings (punctuation and typos)
* added json tag for file_server precompress order and encode matcher
* file_server: add vary header, remove accept-ranges when serving precompressed files
* encode: move Suffix implementation to precompressed modules
* reverseproxy: Implement health_uri, replaces health_path, supports query
Also fixes a bug with `health_status` Caddyfile parsing , it would always only take the first character of the status code even if it didn't end with "xx".
* reverseproxy: Rename to URI, named logger, warn in Provision (for JSON)
This filter is intended to be useful in scenarios where you may want to
redact a value with a static string, giving you information that the
field did previously exist and was present, but not revealing the value
itself in the logs.
This was inspired by work on adding more complete support for removing
sensitive values from logs [1]. An example use case would be the
Authorization header in request log output, for which the value should
usually not be logged, but it may be quite useful for debugging to
confirm that the header was present in the request.
[1] https://github.com/caddyserver/caddy/issues/3958
* reverseproxy: Add duration/latency placeholders (close#4012) (and #2268)
Adds 4 placeholders, one is actually outside reverse proxy though:
{http.request.duration} is how long since the server decoded the HTTP request (headers).
{http.reverse_proxy.upstream.latency} is how long it took a proxy upstream to write the response header.
{http.reverse_proxy.upstream.duration} is total time proxying to the upstream, including writing response body to client.
{http.reverse_proxy.duration} is total time spent proxying, including selecting an upstream and retries.
Obviously, most of these are only useful at the end of a request, like when writing response headers or logs.
See also: https://caddy.community/t/any-equivalent-of-request-time-and-upstream-header-time-from-nginx/11418
* Add new placeholders to documentation
Proxy response bodies can now be buffered, and the size of the request body and
response body buffer can be limited. Any remaining content that doesn't fit in the
buffer will remain on the wire until it can be read; i.e. bodies are not truncated,
even if the buffer is not big enough.
This fulfills a customer requirement. This was made possible by their sponsorship!
The HTTP Caddyfile adapter can now configure the PKI app, and the acme_server directive can now be used to specify a custom CA used for issuing certificates. More customization options can follow later as needed.
If `tls <email>` is used, we should apply that to all applicable default issuers, not drop them. This refactoring applies implicit ACME issuer settings from the tls directive to all default ACME issuers, like ZeroSSL.
We also consolidate some annoying logic and improve config validity checks.
Ref: https://caddy.community/t/error-obtaining-certificate-after-caddy-restart/11335/8
* caddyhttp: Implement handler abort; new 'abort' directive (close#3871)
* Move abort directive ordering; clean up redirects
Seems logical for the end-all of handlers to go at the... end.
The Connection header no longer needs to be set there, since Close is
true, and the static_response handler now does that.
This commits dds 3 separate, but very related features:
1. Automated server identity management
How do you know you're connecting to the server you think you are? How do you know the server connecting to you is the server instance you think it is? Mutually-authenticated TLS (mTLS) answers both of these questions. Using TLS to authenticate requires a public/private key pair (and the peer must trust the certificate you present to it).
Fortunately, Caddy is really good at managing certificates by now. We tap into that power to make it possible for Caddy to obtain and renew its own identity credentials, or in other words, a certificate that can be used for both server verification when clients connect to it, and client verification when it connects to other servers. Its associated private key is essentially its identity, and TLS takes care of possession proofs.
This configuration is simply a list of identifiers and an optional list of custom certificate issuers. Identifiers are things like IP addresses or DNS names that can be used to access the Caddy instance. The default issuers are ZeroSSL and Let's Encrypt, but these are public CAs, so they won't issue certs for private identifiers. Caddy will simply manage credentials for these, which other parts of Caddy can use, for example: remote administration or dynamic config loading (described below).
2. Remote administration over secure connection
This feature adds generic remote admin functionality that is safe to expose on a public interface.
- The "remote" (or "secure") endpoint is optional. It does not affect the standard/local/plaintext endpoint.
- It's the same as the [API endpoint on localhost:2019](https://caddyserver.com/docs/api), but over TLS.
- TLS cannot be disabled on this endpoint.
- TLS mutual auth is required, and cannot be disabled.
- The server's certificate _must_ be obtained and renewed via automated means, such as ACME. It cannot be manually loaded.
- The TLS server takes care of verifying the client.
- The admin handler takes care of application-layer permissions (methods and paths that each client is allowed to use).\
- Sensible defaults are still WIP.
- Config fields subject to change/renaming.
3. Dyanmic config loading at startup
Since this feature was planned in tandem with remote admin, and depends on its changes, I am combining them into one PR.
Dynamic config loading is where you tell Caddy how to load its config, and then it loads and runs that. First, it will load the config you give it (and persist that so it can be optionally resumed later). Then, it will try pulling its _actual_ config using the module you've specified (dynamically loaded configs are _not_ persisted to storage, since resuming them doesn't make sense).
This PR comes with a standard config loader module called `caddy.config_loaders.http`.
Caddyfile config for all of this can probably be added later.
COMMITS:
* admin: Secure socket for remote management
Functional, but still WIP.
Optional secure socket for the admin endpoint is designed
for remote management, i.e. to be exposed on a public
port. It enforces TLS mutual authentication which cannot
be disabled. The default port for this is :2021. The server
certificate cannot be specified manually, it MUST be
obtained from a certificate issuer (i.e. ACME).
More polish and sensible defaults are still in development.
Also cleaned up and consolidated the code related to
quitting the process.
* Happy lint
* Implement dynamic config loading; HTTP config loader module
This allows Caddy to load a dynamic config when it starts.
Dynamically-loaded configs are intentionally not persisted to storage.
Includes an implementation of the standard config loader, HTTPLoader.
Can be used to download configs over HTTP(S).
* Refactor and cleanup; prevent recursive config pulls
Identity management is now separated from remote administration.
There is no need to enable remote administration if all you want is identity
management, but you will need to configure identity management
if you want remote administration.
* Fix lint warnings
* Rename identities->identifiers for consistency
Allows user to disable OCSP stapling (including support in the Caddyfile via the ocsp_stapling global option) or overriding responder URLs. Useful in environments where responders are not reachable due to firewalls.
This changes the signature of UnmarshalGlobalFunc but this is probably OK since it's only used by this repo as far as we know.
We need this change in order to "remember" the previous value in case a global option appears more than once, which is now a possibility with the cert_issuer option since Caddy now supports multiple issuers in the order defined by the user.
Bonus: the issuer subdirective of tls now supports one-liner for "acme" when all you need to set is the directory:
issuer acme <dir>
* reverse_proxy: 1.health check headers can be set through Caddyfile using health_headers directive; 2.health check header host can be set properly
* reverse_proxy:
replace example with syntax definition
inline health_headers directive parse function
* bugfix: change caddyfile_adapt testcase file from space to tab
* reverseproxy: modify health_header value document as optional and add more test cases
* caddyfile: Introduce basic linting and fmt check
This will help encourage people to keep their Caddyfiles tidy.
* Remove unrelated tests
I am not sure that testing the output of warnings here is quite the
right idea; these tests are just for syntax and parsing success.
At some point we changed how paths are represented down the function calls of browse listings and forgot to update the canGoUp logic. I think this is right? It's simpler now.
This allows for finer-grained control when choosing alternate chains than
simply the previous/Certbot-esque behavior of "choose first chain that
contains an issuer's common name." This update allows you to sort by
length (if optimizing for efficiency on the wire) and also to select the
chain with a specific root CommonName.
The remote_ip matcher was reading the X-Forwarded-For header by default, but this behavior was not documented in anything that was released. This is also a less secure default, as it is trivially easy to spoof request headers. Reading IPs from that header should be optional, and it should not be the default.
This is technically a breaking change, but anyone relying on the undocumented behavior was just doing so by coincidence/luck up to this point since it was never in any released documentation. We'll still add a mention in the release notes about this.
Refactor redirect route creation into own function.
Improve condition for appending port.
Fixes a bug manifested through new test case:
TestAutoHTTPRedirectsWithHTTPListenerFirstInAddresses
* add integration test for null header matcher
* implement null header matcher syntax
* avoid repeating magic !
* check for field following ! character
* fastcgi: Set PATH_INFO to file matcher remainder as fallback
* fastcgi: Avoid changing scriptName when not necessary
* Stylistic tweaks
Co-authored-by: Matthew Holt <mholt@users.noreply.github.com>
The docs at os/signal.Notify warn about this signal delivery loss bug at
https://golang.org/pkg/os/signal/#Notify, which says:
Package signal will not block sending to c: the caller must ensure
that c has sufficient buffer space to keep up with the expected signal
rate. For a channel used for notification of just one signal value,
a buffer of size 1 is sufficient.
Caught by a static analysis tool from Orijtech, Inc. called "sigchanyzer"
* fix(caddy): Avoid "operation was canceled" errors
- Also add error handling for StatusGatewayTimeout
* revert(caddy): Revert 504 handling
- This will potentially break load balancing and health checks
* Handle client cancellation as different error
Co-authored-by: Matthew Holt <mholt@users.noreply.github.com>
* acme_server: Refactor database creation apart from authority creation
This is a WIP commit that doesn't really offer anything other than
setting us up for using a UsagePool to gracefully reload acme_server
configs.
* Implement UsagePool
* Remove unused context
* Fix initializing non-ACME CA
This will handle cases where a DB is not provided
* Sanitize acme db path and clean debug logs
* Move regex to package level to prevent recompiling
* acme_server: switch to bbolt storage
There have been some issues with the badger storage engine
being used by the embedded acme_server. This will replace
the storage engine with bbolt
* Switch database path back to acme_server/db and remove if directory
* httpcaddyfile: First pass at implementing server options
* httpcaddyfile: Add listener wrapper support
* httpcaddyfile: Sort sbaddrs to make adapt output more deterministic
* httpcaddyfile: Add server options adapt tests
* httpcaddyfile: Windows line endings lol
* caddytest: More windows line endings lol (sorry Matt)
* Update caddyconfig/httpcaddyfile/serveroptions.go
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
* httpcaddyfile: Reword listener address "matcher"
* Apply suggestions from code review
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
* httpcaddyfile: Deprecate experimental_http3 option (moved to servers)
* httpcaddyfile: Remove validation step, no longer needed
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
* reverseproxy: Add Caddyfile scheme shorthand for h2c
* reverseproxy: Use parentheses for condition
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
* ci: Use golangci's github action for linting
Signed-off-by: Dave Henderson <dhenderson@gmail.com>
* Fix most of the staticcheck lint errors
Signed-off-by: Dave Henderson <dhenderson@gmail.com>
* Fix the prealloc lint errors
Signed-off-by: Dave Henderson <dhenderson@gmail.com>
* Fix the misspell lint errors
Signed-off-by: Dave Henderson <dhenderson@gmail.com>
* Fix the varcheck lint errors
Signed-off-by: Dave Henderson <dhenderson@gmail.com>
* Fix the errcheck lint errors
Signed-off-by: Dave Henderson <dhenderson@gmail.com>
* Fix the bodyclose lint errors
Signed-off-by: Dave Henderson <dhenderson@gmail.com>
* Fix the deadcode lint errors
Signed-off-by: Dave Henderson <dhenderson@gmail.com>
* Fix the unused lint errors
Signed-off-by: Dave Henderson <dhenderson@gmail.com>
* Fix the gosec lint errors
Signed-off-by: Dave Henderson <dhenderson@gmail.com>
* Fix the gosimple lint errors
Signed-off-by: Dave Henderson <dhenderson@gmail.com>
* Fix the ineffassign lint errors
Signed-off-by: Dave Henderson <dhenderson@gmail.com>
* Fix the staticcheck lint errors
Signed-off-by: Dave Henderson <dhenderson@gmail.com>
* Revert the misspell change, use a neutral English
Signed-off-by: Dave Henderson <dhenderson@gmail.com>
* Remove broken golangci-lint CI job
Signed-off-by: Dave Henderson <dhenderson@gmail.com>
* Re-add errantly-removed weakrand initialization
Signed-off-by: Dave Henderson <dhenderson@gmail.com>
* don't break the loop and return
* Removing extra handling for null rootKey
* unignore RegisterModule/RegisterAdapter
Co-authored-by: Mohammed Al Sahaf <msaa1990@gmail.com>
* single-line log message
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
* Fix lint after a1808b0dbf209c615e438a496d257ce5e3acdce2 was merged
Signed-off-by: Dave Henderson <dhenderson@gmail.com>
* Revert ticker change, ignore it instead
Signed-off-by: Dave Henderson <dhenderson@gmail.com>
* Ignore some of the write errors
Signed-off-by: Dave Henderson <dhenderson@gmail.com>
* Remove blank line
Signed-off-by: Dave Henderson <dhenderson@gmail.com>
* Use lifetime
Signed-off-by: Dave Henderson <dhenderson@gmail.com>
* close immediately
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
* Preallocate configVals
Signed-off-by: Dave Henderson <dhenderson@gmail.com>
* Update modules/caddytls/distributedstek/distributedstek.go
Co-authored-by: Mohammed Al Sahaf <msaa1990@gmail.com>
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
* reverseproxy: Enable error logging for connection upgrades
* reverseproxy: Change some of the error levels, unsugar
* Use unsugared log in one spot
Co-authored-by: Matthew Holt <mholt@users.noreply.github.com>
* implement default values for header directive
closes#3804
* remove `set_default` header op and rely on "require" handler instead
This has the following advantages over the previous attempt:
- It does not introduce a new operation for headers, but rather nicely
extends over an existing feature in the header handler.
- It removes the need to specify the header as "deferred" because it is
already implicitely deferred by the use of the require handler. This
should be less confusing to the user.
* add integration test for header directive in caddyfile
* bubble up errors when parsing caddyfile header directive
* don't export unnecessarily and don't canonicalize headers unnecessarily
* fix response headers not passed in blocks
* caddyfile: fix clash when using default header in block
Each header is now set in a separate handler so that it doesn't clash
with other headers set/added/deleted in the same block.
* caddyhttp: New idle_timeout default of 5m
* reverseproxy: fix random hangs on http/2 requests with server push (#3875)
see https://github.com/golang/go/issues/42534
* Refactor and cleanup with improvements
* More specific link
Co-authored-by: Matthew Holt <mholt@users.noreply.github.com>
Co-authored-by: Денис Телюх <telyukh.denis@gmail.com>
Before, if there was an error in the error handler, we would not write a
status code, which resulted in Go writing a 200 for us by default, which
does not make sense when there's an error. Now we write the second
error's status if available, otherwise 500.
* caddytls: Support multiple issuers
Defaults are Let's Encrypt and ZeroSSL.
There are probably bugs.
* Commit updated integration tests, d'oh
* Update go.mod
* nitpicks and small improvements in basicauth module
1:
roll two if statements into one, since err will be nil in the second case anyhow
2:
unlock cache mutex after reading the key, as this happens by-value and reduces code complexity
3:
switch cache sync.Mutex to sync.RWMutex for better concurrency on cache fast track
* allocate the right kind of mutex
* fileserver: Improve and clarify file hiding logic
* Oops, forgot to run integration tests
* Make this one integration test OS-agnostic
* See if this appeases the Windows gods
* D'oh
Always follow the code path of hashing and comparing a plaintext
password even if the account is not found by the given username; this
ensures that similar CPU cycles are spent for both valid and invalid
usernames.
Thanks to @tylerlm for helping and looking into this!
We have users that have site blocks like *.*.tld with on-demand TLS
enabled. While *.*.tld does not qualify for a publicly-trusted cert due
to its wildcards, On-Demand TLS does not actually obtain a cert with
those wildcards, since it uses the actual hostname on the handshake.
This improves on that logic, but I am still not 100% satisfied with the
result since I think we need to also check if another site block is more
specific, like foo.example.tld, which might not have on-demand TLS
enabled, and make sure an automation policy gets created before the
more general policy with on-demand...
* reverseproxy: Fix dial placeholders, SRV, active health checks
Supercedes #3776
Partially reverts or updates #3756, #3693, and #3695
* reverseproxy: add integration tests
Co-authored-by: Mohammed Al Sahaf <msaa1990@gmail.com>
* reverseproxy: fix breakage in handling SRV lookup introduced by 3695
* reverseproxy: validate against incompatible config options with lookup_srv
* reverseproxy: add integration test cases for validations involving lookup_srv
* reverseproxy: clarify the reason for skipping an iteration
* grammar.. Oxford comma
Co-authored-by: Francis Lavoie <lavofr@gmail.com>
Co-authored-by: Francis Lavoie <lavofr@gmail.com>
Fixes#3753
* caddyfile: support vars and vars_regexp matchers in the caddyfile
* caddyfile: matchers: Brian Kernighan said printf is good debugging tool but didn't say keep them around
* metrics: Always track method label in uppercase
Signed-off-by: Dave Henderson <dhenderson@gmail.com>
* Just use strings.ToUpper for clarity
Signed-off-by: Dave Henderson <dhenderson@gmail.com>
* metrics: Fixing panic while observing with bad exemplars
Signed-off-by: Dave Henderson <dhenderson@gmail.com>
* Minor cleanup
The server is already added to the context. So, we can simply use that
to get the server name, which is a field on the server.
* Add integration test for auto HTTP->HTTPS redirects
A test like this would have caught the problem in the first place
Co-authored-by: Matthew Holt <mholt@users.noreply.github.com>
* reverseproxy: construct active health-check transport from scratch (Fixes#3691)
* reverseproxy: do upstream health-check on the correct alternative port
* reverseproxy: add integration test for health-check on alternative port
* reverseproxy: put back the custom transport for health-check http client
* reverseproxy: cleanup health-check integration test
* reverseproxy: fix health-check of unix socket upstreams
* reverseproxy: skip unix socket tests on Windows
* tabs > spaces
Co-authored-by: Francis Lavoie <lavofr@gmail.com>
* make the linter (and @francislavoie) happy
Co-authored-by: Francis Lavoie <lavofr@gmail.com>
* One more lint fix
Co-authored-by: Francis Lavoie <lavofr@gmail.com>
Co-authored-by: Francis Lavoie <lavofr@gmail.com>
* fileserver: Fix try_files for directories, windows fix
* fileserver: Add new file type placeholder, refactoring, tests
* fileserver: Review cleanup
* fileserver: Flip the return args order
* Fix-3585: added placeholder for a PEM encoded value of the certificate
* Update modules/caddyhttp/replacer.go
Change type of block and empty headers removed
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
* fixed tests
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
* logging: Implement Caddyfile support for filter encoder
* logging: Add support for parsing IP masks from strings
wip
* logging: Implement Caddyfile support for ip_mask
* logging: Get rid of unnecessary logic to allow strings, not that useful
* logging: Add adapt test
