We realized we made some mistakes with the directive ordering, so we're making some minor adjustments.
`abort` and `error` don't really make sense to be after other handler directives, because you would expect to be able to "fail-fast" and throw an error before falling through to some `file_server` or `respond` typically. So we're moving them up to just before `respond`, i.e. before the common handler directives.
This is also more consistent with our existing examples in the docs, which actually didn't work due to the directive ordering. See https://caddyserver.com/docs/caddyfile/directives/error#examples
Also, `push` doesn't quite make sense to be after `handle`/`route`, since its job is to read from response headers to push additional resources if necessary, and `handle`/`route` may be terminal so push would not be reached if it was declared outside those. And also, it would make sense to be _before_ `templates` because a template _could_ add a `Link` header to the response dynamically.
Some new users mistakenly try to define two sites without braces around each. Doing this can yield a confusing error message saying that their site address is an "unknown directive".
We can do better by keeping track of whether the current site block was parsed with or without a brace, then changing the error message later based on that.
For example, now this invalid config:
```
foo.example.com
respond "foo"
bar.example.com
respond "bar"
```
Will yield this error message:
```
$ caddy adapt
2021/08/22 19:21:31.028 INFO using adjacent Caddyfile
adapt: Caddyfile:4: unrecognized directive: bar.example.com
Did you mean to define a second site? If so, you must use curly braces around each site to separate their configurations.
```
Some users forget to use a comma between their site addresses. This is invalid (commas aren't a valid character in domains) and later parts of the code like certificate automation will try to use this otherwise, which doesn't make sense. Best to error as early as possible.
Example thread on the forums where this happened: https://caddy.community/t/simplify-caddyfile/13281/9
* httpcaddyfile: Add shortcut for proxy hostport placeholder
I've noticed that it's a pretty common pattern to write a proxy like this, when needing to proxy over HTTPS:
```
reverse_proxy https://example.com {
header_up Host {http.reverse_proxy.upstream.hostport}
}
```
I find it pretty hard to remember the exact placeholder to use for this, and I continually need to refer to the docs when I need it. I think a simple fix for this is to add another Caddyfile placeholder for this one to shorten it:
```
reverse_proxy https://example.com {
header_up Host {proxy_hostport}
}
```
* Switch the shortcut name
* httpcaddyfile: ensure hosts to skip can always be collected
Previously, some hosts that should be skipped in logging would
be missed as the current logic would only collect them after
encountering the first server that would log. This change makes sure
the ServerLogConfig is initialized before iterating over the server
blocks.
* httpcaddyfile: add test case for skip hosts behavior
If an email is specified in global options, a site called 'localhost' shouldn't be bunched together with public DNS names in the automation policies, which get the default, public-CA issuers. Fix old test that did this.
I also noticed that these two:
localhost {
}
example.com {
}
and
localhost, example.com {
}
produce slightly different TLS automation policies. The former is what the new test case covers, and we have logic that removes the empty automation policy for localhost so that auto-HTTPS can implicitly create one. (We prefer that whenever possible.) But the latter case produces two automation policies, with the second one being for localhost, with an explicit internal issuer. It's not wrong, just more explicit than it needs to be.
I'd really like to completely rewrite the code from scratch that generates automation policies, hopefully there is a simpler, more correct algorithm.
In the Caddyfile, hosts specified for HTTP sockets (either scheme is "http" or it is on the HTTP port) should not be used as subjects in TLS automation policies (APs).
* caddyfile: Add parse error on site address in `{`
This is an incredibly common mistake made by users, so we should catch it earlier in the parser and give a more friendly message. Often it ends up adapting but with mistakes, or erroring out later due to other site addresses being read as directives.
There's not really ever a situation where a lone '{' is valid at the end of a site address (but I suppose there are edgecases where the user wants to use a path matcher where it ends specifically in `{`, but... why?), so this should be fine.
* Update caddyconfig/caddyfile/parse.go
* caddyfile(formatter): fix nesting not decrementing
This is an extremely weird edge-case where if you had a environment variable {}
on one line, a comment on the next line, and the closing of the block on the
following line; the rest of the Caddyfile would be indented further than it
should've been.
ref; https://github.com/matthewpi/vscode-caddyfile-support/issues/13
* run gofmt
* fmt: better way of handling edge case
* reverseproxy: Add `handle_response` blocks to `reverse_proxy` (#3710)
* reverseproxy: complete handle_response test
* reverseproxy: Change handle_response matchers to use named matchers
reverseproxy: Add support for changing status code
* fastcgi: Remove obsolete TODO
We already have d.Err("transport already specified") in the reverse_proxy parsing code which covers this case
* reverseproxy: Fix support for "4xx" type status codes
* Apply suggestions from code review
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
* caddyhttp: Reorganize response matchers
* reverseproxy: Reintroduce caddyfile.Unmarshaler
* reverseproxy: Add comment mentioning Finalize should be called
Co-authored-by: Maxime Soulé <btik-git@scoubidou.com>
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
* httpcaddyfile: Fix unexpectedly removed policy
When user set on_demand tls option in a catch-all (:443) policy,
we expect other policies to not have the on_demand enabled
See ex in tls_automation_policies_5.txt
Btw, we can remove policies if they are **all** empty.
* Update caddyconfig/httpcaddyfile/tlsapp.go
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
* caddyfile: Fix `import` replacing unrelated placeholders
See https://caddy.community/t/snippet-issue-works-outside-snippet/12231
So it turns out that `NewReplacer()` gives a replacer with some global defaults (like `{env.*}` and some system and time placeholders), which is not ideal when running `import` because we just want to replace `{args.*}` only, and nothing else.
* caddyfile: Add test
* caddyfile: reject recursive self-imports
* caddyfile: detect and reject cyclic imports of snippets and files
* caddyfile: do not be stickler about connected nodes not being connected already
* caddyfile: include missing test artifacts of cyclic imports
* address review comments
This change is aimed at enhancing the logging module within the
Caddyfile directive to allow users to configure logs other than the HTTP
access log stream, which is the current capability of the Caddyfile [1].
The intent here is to leverage the same syntax as the server log
directive at a global level, so that similar customizations can be added
without needing to resort to a JSON-based configuration.
Discussion for this approach happened in the referenced issue.
Closes https://github.com/caddyserver/caddy/issues/3958
[1] https://caddyserver.com/docs/caddyfile/directives/log
Allows conveniently setting the resolvers for the DNS challenge using a TLS subdirective, which applies to default issuers, rather than having to explicitly define the issuers and overwrite the defaults.
The HTTP Caddyfile adapter can now configure the PKI app, and the acme_server directive can now be used to specify a custom CA used for issuing certificates. More customization options can follow later as needed.
If `tls <email>` is used, we should apply that to all applicable default issuers, not drop them. This refactoring applies implicit ACME issuer settings from the tls directive to all default ACME issuers, like ZeroSSL.
We also consolidate some annoying logic and improve config validity checks.
Ref: https://caddy.community/t/error-obtaining-certificate-after-caddy-restart/11335/8
* caddyhttp: Implement handler abort; new 'abort' directive (close#3871)
* Move abort directive ordering; clean up redirects
Seems logical for the end-all of handlers to go at the... end.
The Connection header no longer needs to be set there, since Close is
true, and the static_response handler now does that.
This commits dds 3 separate, but very related features:
1. Automated server identity management
How do you know you're connecting to the server you think you are? How do you know the server connecting to you is the server instance you think it is? Mutually-authenticated TLS (mTLS) answers both of these questions. Using TLS to authenticate requires a public/private key pair (and the peer must trust the certificate you present to it).
Fortunately, Caddy is really good at managing certificates by now. We tap into that power to make it possible for Caddy to obtain and renew its own identity credentials, or in other words, a certificate that can be used for both server verification when clients connect to it, and client verification when it connects to other servers. Its associated private key is essentially its identity, and TLS takes care of possession proofs.
This configuration is simply a list of identifiers and an optional list of custom certificate issuers. Identifiers are things like IP addresses or DNS names that can be used to access the Caddy instance. The default issuers are ZeroSSL and Let's Encrypt, but these are public CAs, so they won't issue certs for private identifiers. Caddy will simply manage credentials for these, which other parts of Caddy can use, for example: remote administration or dynamic config loading (described below).
2. Remote administration over secure connection
This feature adds generic remote admin functionality that is safe to expose on a public interface.
- The "remote" (or "secure") endpoint is optional. It does not affect the standard/local/plaintext endpoint.
- It's the same as the [API endpoint on localhost:2019](https://caddyserver.com/docs/api), but over TLS.
- TLS cannot be disabled on this endpoint.
- TLS mutual auth is required, and cannot be disabled.
- The server's certificate _must_ be obtained and renewed via automated means, such as ACME. It cannot be manually loaded.
- The TLS server takes care of verifying the client.
- The admin handler takes care of application-layer permissions (methods and paths that each client is allowed to use).\
- Sensible defaults are still WIP.
- Config fields subject to change/renaming.
3. Dyanmic config loading at startup
Since this feature was planned in tandem with remote admin, and depends on its changes, I am combining them into one PR.
Dynamic config loading is where you tell Caddy how to load its config, and then it loads and runs that. First, it will load the config you give it (and persist that so it can be optionally resumed later). Then, it will try pulling its _actual_ config using the module you've specified (dynamically loaded configs are _not_ persisted to storage, since resuming them doesn't make sense).
This PR comes with a standard config loader module called `caddy.config_loaders.http`.
Caddyfile config for all of this can probably be added later.
COMMITS:
* admin: Secure socket for remote management
Functional, but still WIP.
Optional secure socket for the admin endpoint is designed
for remote management, i.e. to be exposed on a public
port. It enforces TLS mutual authentication which cannot
be disabled. The default port for this is :2021. The server
certificate cannot be specified manually, it MUST be
obtained from a certificate issuer (i.e. ACME).
More polish and sensible defaults are still in development.
Also cleaned up and consolidated the code related to
quitting the process.
* Happy lint
* Implement dynamic config loading; HTTP config loader module
This allows Caddy to load a dynamic config when it starts.
Dynamically-loaded configs are intentionally not persisted to storage.
Includes an implementation of the standard config loader, HTTPLoader.
Can be used to download configs over HTTP(S).
* Refactor and cleanup; prevent recursive config pulls
Identity management is now separated from remote administration.
There is no need to enable remote administration if all you want is identity
management, but you will need to configure identity management
if you want remote administration.
* Fix lint warnings
* Rename identities->identifiers for consistency
Previous commit improved the Caddyfile adapter so it doesn't unnecessarily add names to "skip" in "auto_https" when the server is already HTTP-only.
This commit updates the tests to reflect that change, while also fixing the Caddyfile formatting in many of the tests.
We also print the line number of the divergence between input and formatted version in Caddyfile adapt warnings - very useful for finding initial formatting problems.
This is probably an invasive change, but existing tests continue to pass.
It seems to make sense this way. There is likely an edge case I haven't
considered.
Allows user to disable OCSP stapling (including support in the Caddyfile via the ocsp_stapling global option) or overriding responder URLs. Useful in environments where responders are not reachable due to firewalls.
This changes the signature of UnmarshalGlobalFunc but this is probably OK since it's only used by this repo as far as we know.
We need this change in order to "remember" the previous value in case a global option appears more than once, which is now a possibility with the cert_issuer option since Caddy now supports multiple issuers in the order defined by the user.
Bonus: the issuer subdirective of tls now supports one-liner for "acme" when all you need to set is the directory:
issuer acme <dir>