* httpcaddyfile: Add `{vars.*}` placeholder shortcut
I'm yoinking this from my https://github.com/caddyserver/caddy/pull/4657 PR because I think we should get this in ASAP for v2.5.0 along with the new `vars` directive.
* Sort vars by matchers in reverse
Guh, this is complicated.
Fixes#4640
This also follows up on #4398 (reverting it) which made a change that technically worked, but was incorrect. It changed the condition in `hostsFromKeysNotHTTP` from `&&` to `||`, but then the function no longer did what its name said it would do, and it would return hosts even if they were marked with `http://`, if they used a non-HTTP port. That wasn't the intent of it. The test added in there was kept though, because it is a valid usecase.
The actual fix is to check _earlier_ whether all the addresses explicitly have `http://`, and if so we can short circuit and skip considering the rest.
Lots of the files were using CRLF instead of LF. Mostly my fault cause sometimes I make the files on Windows and VSCode for some reason kept making them with the wrong line endings. Sigh.
Since .txt files typically default to spaces for indentation, I'm also adding an .editorconfig to ensure they use tabs instead
* caddyfile: Support for raw token values, improve `map`, `expression`
* Applied code review comments
* Rename RawVal to ValRaw
Co-authored-by: Matthew Holt <mholt@users.noreply.github.com>
* reverseproxy: New `copy_response` handler for `handle_response` routes
Followup to #4298 and #4388.
This adds a new `copy_response` handler which may only be used in `reverse_proxy`'s `handle_response` routes, which can be used to actually copy the proxy response downstream.
Previously, if `handle_response` was used (with routes, not the status code mode), it was impossible to use the upstream's response body at all, because we would always close the body, expecting the routes to write a new body from scratch.
To implement this, I had to refactor `h.reverseProxy()` to move all the code that came after the `HandleResponse` loop into a new function. This new function `h.finalizeResponse()` takes care of preparing the response by removing extra headers, dealing with trailers, then copying the headers and body downstream.
Since basically what we want `copy_response` to do is invoke `h.finalizeResponse()` at a configurable point in time, we need to pass down the proxy handler, the response, and some other state via a new `req.WithContext(ctx)`. Wrapping a new context is pretty much the only way we have to jump a few layers in the HTTP middleware chain and let a handler pick up this information. Feels a bit dirty, but it works.
Also fixed a bug with the `http.reverse_proxy.upstream.duration` placeholder, it always had the same duration as `http.reverse_proxy.upstream.latency`, but the former was meant to be the time taken for the roundtrip _plus_ copying/writing the response.
* Delete the "Content-Length" header if we aren't copying
Fixes a bug where the Content-Length will mismatch the actual bytes written if we skipped copying the response, so we get a message like this when using curl:
```
curl: (18) transfer closed with 18 bytes remaining to read
```
To replicate:
```
{
admin off
debug
}
:8881 {
reverse_proxy 127.0.0.1:8882 {
@200 status 200
handle_response @200 {
header Foo bar
}
}
}
:8882 {
header Content-Type application/json
respond `{"hello": "world"}` 200
}
```
* Implement `copy_response_headers`, with include/exclude list support
* Apply suggestions from code review
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
* opentelemetry: create a new module
* fix imports
* fix test
* Update modules/caddyhttp/opentelemetry/README.md
Co-authored-by: Dave Henderson <dhenderson@gmail.com>
* Update modules/caddyhttp/opentelemetry/README.md
Co-authored-by: Dave Henderson <dhenderson@gmail.com>
* Update modules/caddyhttp/opentelemetry/README.md
Co-authored-by: Dave Henderson <dhenderson@gmail.com>
* Update modules/caddyhttp/opentelemetry/tracer.go
Co-authored-by: Dave Henderson <dhenderson@gmail.com>
* rename error ErrUnsupportedTracesProtocol
* replace spaces with tabs in the test data
* Update modules/caddyhttp/opentelemetry/README.md
Co-authored-by: Francis Lavoie <lavofr@gmail.com>
* Update modules/caddyhttp/opentelemetry/README.md
Co-authored-by: Francis Lavoie <lavofr@gmail.com>
* replace spaces with tabs in the README.md
* use default values for a propagation and exporter protocol
* set http attributes with helper
* simplify code
* Cleanup modules/caddyhttp/opentelemetry/README.md
Co-authored-by: Dave Henderson <dhenderson@gmail.com>
* Update link in README.md
Co-authored-by: Dave Henderson <dhenderson@gmail.com>
* Update documentation in README.md
Co-authored-by: Dave Henderson <dhenderson@gmail.com>
* Update link to naming spec in README.md
Co-authored-by: Dave Henderson <dhenderson@gmail.com>
* Rename module from opentelemetry to tracing
Co-authored-by: Dave Henderson <dhenderson@gmail.com>
* Rename span_name to span
Co-authored-by: Dave Henderson <dhenderson@gmail.com>
* Rename span_name to span
Co-authored-by: Dave Henderson <dhenderson@gmail.com>
* Simplify otel resource creation
Co-authored-by: Dave Henderson <dhenderson@gmail.com>
* handle extra attributes
Co-authored-by: Dave Henderson <dhenderson@gmail.com>
* update go.opentelemetry.io/otel/semconv to 1.7.0
Co-authored-by: Dave Henderson <dhenderson@gmail.com>
* update go.opentelemetry.io/otel version
* remove environment variable handling
* always use tracecontext,baggage as propagators
* extract tracer name into variable
* rename OpenTelemetry to Tracing
* simplify resource creation
* update go.mod
* rename package from opentelemetry to tracing
* cleanup tests
* update Caddyfile example in README.md
* update README.md
* fix test
* fix module name in README.md
* fix module name in README.md
* change names in README.md and tests
* order imports
* remove redundant tests
* Update documentation README.md
Co-authored-by: Dave Henderson <dhenderson@gmail.com>
* Fix grammar
Co-authored-by: Dave Henderson <dhenderson@gmail.com>
* Update comments
Co-authored-by: Dave Henderson <dhenderson@gmail.com>
* Update comments
Co-authored-by: Dave Henderson <dhenderson@gmail.com>
* update go.sum
* update go.sum
* Add otelhttp instrumentation, update OpenTelemetry libraries.
* Use otelhttp instrumentation for instrumenting HTTP requests.
This change uses context.WithValue to inject the next handler into the
request context via a "nextCall" carrier struct, and pass it on to a
standard Go HTTP handler returned by otelhttp.NewHandler. The
underlying handler will extract the next handler from the context,
call it and pass the returned error to the carrier struct.
* use zap.Error() for the error log
* remove README.md
* update dependencies
* clean up the code
* change comment
* move serveHTTP method from separate file
* add syntax to the UnmarshalCaddyfile comment
* go import the file
* admin: Write proper status on invalid requests (#4569) (fix#4561)
* update dependencies
Co-authored-by: Dave Henderson <dhenderson@gmail.com>
Co-authored-by: Francis Lavoie <lavofr@gmail.com>
Co-authored-by: Vibhav Pant <vibhavp@gmail.com>
Co-authored-by: Alok Naushad <alokme123@gmail.com>
Co-authored-by: Cedric Ziel <cedric@cedric-ziel.com>
* reverseproxy: Begin refactor to enable dynamic upstreams
Streamed here: https://www.youtube.com/watch?v=hj7yzXb11jU
* Implement SRV and A/AAA upstream sources
Also get upstreams at every retry loop iteration instead of just once
before the loop. See #4442.
* Minor tweaks from review
* Limit size of upstreams caches
* Add doc notes deprecating LookupSRV
* Provision dynamic upstreams
Still WIP, preparing to preserve health checker functionality
* Rejigger health checks
Move active health check results into handler-specific Upstreams.
Improve documentation regarding health checks and upstreams.
* Deprecation notice
* Add Caddyfile support, use `caddy.Duration`
* Interface guards
* Implement custom resolvers, add resolvers to http transport Caddyfile
* SRV: fix Caddyfile `name` inline arg, remove proto condition
* Use pointer receiver
* Add debug logs
Co-authored-by: Francis Lavoie <lavofr@gmail.com>
The `net.JoinHostPort()` function has some naiive logic for handling IPv6, it just checks if the host part has a `:` and if so it wraps the host part with `[ ]` but this causes our network type prefix to get wrapped as well, which is invalid for `caddy.NetworkAddress`. Instead, we can just concatenate the host and port manually here to avoid this side-effect.
* caddyhttp: Enhance vars matcher
Enable "or" logic for multiple values.
Fall back to checking placeholders if not a var name.
* Fix tests (thanks @mohammed90 !)
* reverseproxy: Adjust defaults, document defaults
Related to some of the issues in https://github.com/caddyserver/caddy/issues/4245, a complaint about the proxy transport defaults not being properly documented in https://caddy.community/t/default-values-for-directives/14254/6.
- Dug into the stdlib to find the actual defaults for some of the timeouts and buffer limits, documenting them in godoc so the JSON docs get them next release.
- Moved the keep-alive and dial-timeout defaults from `reverseproxy.go` to `httptransport.go`. It doesn't make sense to set defaults in the proxy, because then any time the transport is configured with non-defaults, the keep-alive and dial-timeout defaults are lost!
- Sped up the dial timeout from 10s to 3s, in practice it rarely makes sense to wait a whole 10s for dialing. A shorter timeout helps a lot with the load balancer retries, so using something lower helps with user experience.
* reverseproxy: Make keepalive interval configurable via Caddyfile
* fastcgi: DialTimeout default for fastcgi transport too
We realized we made some mistakes with the directive ordering, so we're making some minor adjustments.
`abort` and `error` don't really make sense to be after other handler directives, because you would expect to be able to "fail-fast" and throw an error before falling through to some `file_server` or `respond` typically. So we're moving them up to just before `respond`, i.e. before the common handler directives.
This is also more consistent with our existing examples in the docs, which actually didn't work due to the directive ordering. See https://caddyserver.com/docs/caddyfile/directives/error#examples
Also, `push` doesn't quite make sense to be after `handle`/`route`, since its job is to read from response headers to push additional resources if necessary, and `handle`/`route` may be terminal so push would not be reached if it was declared outside those. And also, it would make sense to be _before_ `templates` because a template _could_ add a `Link` header to the response dynamically.
* httpcaddyfile: ensure hosts to skip can always be collected
Previously, some hosts that should be skipped in logging would
be missed as the current logic would only collect them after
encountering the first server that would log. This change makes sure
the ServerLogConfig is initialized before iterating over the server
blocks.
* httpcaddyfile: add test case for skip hosts behavior
If an email is specified in global options, a site called 'localhost' shouldn't be bunched together with public DNS names in the automation policies, which get the default, public-CA issuers. Fix old test that did this.
I also noticed that these two:
localhost {
}
example.com {
}
and
localhost, example.com {
}
produce slightly different TLS automation policies. The former is what the new test case covers, and we have logic that removes the empty automation policy for localhost so that auto-HTTPS can implicitly create one. (We prefer that whenever possible.) But the latter case produces two automation policies, with the second one being for localhost, with an explicit internal issuer. It's not wrong, just more explicit than it needs to be.
I'd really like to completely rewrite the code from scratch that generates automation policies, hopefully there is a simpler, more correct algorithm.
In the Caddyfile, hosts specified for HTTP sockets (either scheme is "http" or it is on the HTTP port) should not be used as subjects in TLS automation policies (APs).
Followup to #4150, #4151 /cc @ueffel @polarathene
After a bit of discussion with @mholt, we decided to remove `prefer` as a subdirective and just go with using the order implicitly always. Simpler config, simpler docs, etc.
Effectively changes 7776471 and reverts a small part of f35a7fa.
* reverseproxy: Add `handle_response` blocks to `reverse_proxy` (#3710)
* reverseproxy: complete handle_response test
* reverseproxy: Change handle_response matchers to use named matchers
reverseproxy: Add support for changing status code
* fastcgi: Remove obsolete TODO
We already have d.Err("transport already specified") in the reverse_proxy parsing code which covers this case
* reverseproxy: Fix support for "4xx" type status codes
* Apply suggestions from code review
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
* caddyhttp: Reorganize response matchers
* reverseproxy: Reintroduce caddyfile.Unmarshaler
* reverseproxy: Add comment mentioning Finalize should be called
Co-authored-by: Maxime Soulé <btik-git@scoubidou.com>
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
* httpcaddyfile: Fix unexpectedly removed policy
When user set on_demand tls option in a catch-all (:443) policy,
we expect other policies to not have the on_demand enabled
See ex in tls_automation_policies_5.txt
Btw, we can remove policies if they are **all** empty.
* Update caddyconfig/httpcaddyfile/tlsapp.go
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
* caddyfile: Fix `import` replacing unrelated placeholders
See https://caddy.community/t/snippet-issue-works-outside-snippet/12231
So it turns out that `NewReplacer()` gives a replacer with some global defaults (like `{env.*}` and some system and time placeholders), which is not ideal when running `import` because we just want to replace `{args.*}` only, and nothing else.
* caddyfile: Add test
After reading a question about the `handle_response` feature of `reverse_proxy`, I realized that we didn't have a way of serving an arbitrary file with a status code other than 200. This is an issue in situations where you want to serve a custom error page in routes that are not errors, like the aforementioned `handle_response`, where you may want to retain the status code returned by the proxy but write a response with content from a file.
This feature is super simple, basically if a status code is configured (can be a status code number, or a placeholder string) then that status will be written out before serving the file - if we write the status code first, then the stdlib won't write its own (only the first HTTP status header wins).
* encode: implement prefer setting
* encode: minimum_length configurable via caddyfile
* encode: configurable content-types which to encode
* file_server: support precompressed files
* encode: use ReponseMatcher for conditional encoding of content
* linting error & documentation of encode.PrecompressedOrder
* encode: allow just one response matcher
also change the namespace of the encoders back, I accidently changed to precompressed >.>
default matchers include a * to match to any charset, that may be appended
* rounding of the PR
* added integration tests for new caddyfile directives
* improved various doc strings (punctuation and typos)
* added json tag for file_server precompress order and encode matcher
* file_server: add vary header, remove accept-ranges when serving precompressed files
* encode: move Suffix implementation to precompressed modules
* reverseproxy: Implement health_uri, replaces health_path, supports query
Also fixes a bug with `health_status` Caddyfile parsing , it would always only take the first character of the status code even if it didn't end with "xx".
* reverseproxy: Rename to URI, named logger, warn in Provision (for JSON)
This filter is intended to be useful in scenarios where you may want to
redact a value with a static string, giving you information that the
field did previously exist and was present, but not revealing the value
itself in the logs.
This was inspired by work on adding more complete support for removing
sensitive values from logs [1]. An example use case would be the
Authorization header in request log output, for which the value should
usually not be logged, but it may be quite useful for debugging to
confirm that the header was present in the request.
[1] https://github.com/caddyserver/caddy/issues/3958
This change is aimed at enhancing the logging module within the
Caddyfile directive to allow users to configure logs other than the HTTP
access log stream, which is the current capability of the Caddyfile [1].
The intent here is to leverage the same syntax as the server log
directive at a global level, so that similar customizations can be added
without needing to resort to a JSON-based configuration.
Discussion for this approach happened in the referenced issue.
Closes https://github.com/caddyserver/caddy/issues/3958
[1] https://caddyserver.com/docs/caddyfile/directives/log
Previous commit improved the Caddyfile adapter so it doesn't unnecessarily add names to "skip" in "auto_https" when the server is already HTTP-only.
This commit updates the tests to reflect that change, while also fixing the Caddyfile formatting in many of the tests.
We also print the line number of the divergence between input and formatted version in Caddyfile adapt warnings - very useful for finding initial formatting problems.
This is probably an invasive change, but existing tests continue to pass.
It seems to make sense this way. There is likely an edge case I haven't
considered.
* reverse_proxy: 1.health check headers can be set through Caddyfile using health_headers directive; 2.health check header host can be set properly
* reverse_proxy:
replace example with syntax definition
inline health_headers directive parse function
* bugfix: change caddyfile_adapt testcase file from space to tab
* reverseproxy: modify health_header value document as optional and add more test cases
* add integration test for null header matcher
* implement null header matcher syntax
* avoid repeating magic !
* check for field following ! character
* httpcaddyfile: First pass at implementing server options
* httpcaddyfile: Add listener wrapper support
* httpcaddyfile: Sort sbaddrs to make adapt output more deterministic
* httpcaddyfile: Add server options adapt tests
* httpcaddyfile: Windows line endings lol
* caddytest: More windows line endings lol (sorry Matt)
* Update caddyconfig/httpcaddyfile/serveroptions.go
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
* httpcaddyfile: Reword listener address "matcher"
* Apply suggestions from code review
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
* httpcaddyfile: Deprecate experimental_http3 option (moved to servers)
* httpcaddyfile: Remove validation step, no longer needed
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
* reverseproxy: Add Caddyfile scheme shorthand for h2c
* reverseproxy: Use parentheses for condition
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
* implement default values for header directive
closes#3804
* remove `set_default` header op and rely on "require" handler instead
This has the following advantages over the previous attempt:
- It does not introduce a new operation for headers, but rather nicely
extends over an existing feature in the header handler.
- It removes the need to specify the header as "deferred" because it is
already implicitely deferred by the use of the require handler. This
should be less confusing to the user.
* add integration test for header directive in caddyfile
* bubble up errors when parsing caddyfile header directive
* don't export unnecessarily and don't canonicalize headers unnecessarily
* fix response headers not passed in blocks
* caddyfile: fix clash when using default header in block
Each header is now set in a separate handler so that it doesn't clash
with other headers set/added/deleted in the same block.
* caddyhttp: New idle_timeout default of 5m
* reverseproxy: fix random hangs on http/2 requests with server push (#3875)
see https://github.com/golang/go/issues/42534
* Refactor and cleanup with improvements
* More specific link
Co-authored-by: Matthew Holt <mholt@users.noreply.github.com>
Co-authored-by: Денис Телюх <telyukh.denis@gmail.com>
* caddytls: Support multiple issuers
Defaults are Let's Encrypt and ZeroSSL.
There are probably bugs.
* Commit updated integration tests, d'oh
* Update go.mod
* fileserver: Improve and clarify file hiding logic
* Oops, forgot to run integration tests
* Make this one integration test OS-agnostic
* See if this appeases the Windows gods
* D'oh
* httpcaddyfile: Revise automation policy generation
This should fix a frustrating edge case where wildcard subjects are
used, which potentially get shadowed by more specific versions of
themselves; see the new tests for an example. This change is motivated
by an actual customer requirement.
Although all the tests pass, this logic is incredibly complex and
nuanced, and I'm worried it is not correct. But it took me about 4 days
to get this far on a solution. I did my best.
* Fix typo
* caddyfile: support vars and vars_regexp matchers in the caddyfile
* caddyfile: matchers: Brian Kernighan said printf is good debugging tool but didn't say keep them around
* httpcaddyfile: Ensure handle_path is sorted as equal to handle
* httpcaddyfile: Make mutual exclusivity grouping deterministic (I hope)
* httpcaddyfile: Add comment linking to the issue being fixed
* httpcaddyfile: Typo fix, comment clarity
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
* Update caddyconfig/httpcaddyfile/httptype.go
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
* logging: Implement Caddyfile support for filter encoder
* logging: Add support for parsing IP masks from strings
wip
* logging: Implement Caddyfile support for ip_mask
* logging: Get rid of unnecessary logic to allow strings, not that useful
* logging: Add adapt test
* httpcaddyfile: Flip `root` directive sort order
* httpcaddyfile: Sort directives with any matcher before those with none
* httpcaddyfile: Generalize reverse sort directives, improve logic
* httpcaddyfile: Fix "spelling" issue
* httpcaddyfile: Turns out the second change precludes the first
httpcaddyfile: Delete test that no longer makes sense
* httpcaddyfile: Shorten logic
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
* caddytls: Add support for ZeroSSL; add Caddyfile support for issuers
Configuring issuers explicitly in a Caddyfile is not easily compatible
with existing ACME-specific parameters such as email or acme_ca which
infer the kind of issuer it creates (this is complicated now because
the ZeroSSL issuer wraps the ACME issuer)... oh well, we can revisit
that later if we need to.
New Caddyfile global option:
{
cert_issuer <name> ...
}
Or, alternatively, as a tls subdirective:
tls {
issuer <name> ...
}
For example, to use ZeroSSL with an API key:
{
cert_issuser zerossl API_KEY
}
For now, that still uses ZeroSSL's ACME endpoint; it fetches EAB
credentials for you. You can also provide the EAB credentials directly
just like any other ACME endpoint:
{
cert_issuer acme {
eab KEY_ID MAC_KEY
}
}
All these examples use the new global option (or tls subdirective). You
can still use traditional/existing options with ZeroSSL, since it's
just another ACME endpoint:
{
acme_ca https://acme.zerossl.com/v2/DV90
acme_eab KEY_ID MAC_KEY
}
That's all there is to it. You just can't mix-and-match acme_* options
with cert_issuer, because it becomes confusing/ambiguous/complicated to
merge the settings.
* Fix broken test
This test was asserting buggy behavior, oops - glad this branch both
discovers and fixes the bug at the same time!
* Fix broken test (post-merge)
* Update modules/caddytls/acmeissuer.go
Fix godoc comment
Co-authored-by: Francis Lavoie <lavofr@gmail.com>
* Add support for ZeroSSL's EAB-by-email endpoint
Also transform the ACMEIssuer into ZeroSSLIssuer implicitly if set to
the ZeroSSL endpoint without EAB (the ZeroSSLIssuer is needed to
generate EAB if not already provided); this is now possible with either
an API key or an email address.
* go.mod: Use latest certmagic, acmez, and x/net
* Wrap underlying logic rather than repeating it
Oops, duh
* Form-encode email info into request body for EAB endpoint
Co-authored-by: Francis Lavoie <lavofr@gmail.com>
* Bring `ensure_origin` and `origins` to caddyfile admin config
* Add unit test for caddyfile admin config update
* Add caddyfile adapt test for typical admin setup
* httpcaddyfile: Replace admin config error message when there's more arguments than needed
Replace d.Err() to d.ArgErr() since the latter provides similarly informative error message
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
* reverseproxy: Fix Caddyfile parsing for empty non-http transports
* Update modules/caddyhttp/reverseproxy/caddyfile.go
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
* Rename empty transport test
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
* Adds global options for external account bindings
* Maybe other people use ctags too?
* Use nested block to configure external account
* go format files
* Restore acme_ca directive in test file
* Change Caddyfile config syntax for acme_eab
* Update test
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
* caddyconfig: WIP implementation of handle_path
* caddyconfig: Complete the implementation - h.NewRoute was key
* caddyconfig: Add handle_path integration test
* caddyhttp: Use the path matcher as-is, strip the trailing *, update test
* fastcgi: Add new php_fastcgi subdirectives to override the shortcut
* fastcgi: Support "index off" to disable redir and try_files
* fastcgi: Remove whitespace to satisfy linter
* fastcgi: Run gofmt
* fastcgi: Make a new dispenser instead of using rewind
* fastcgi: Some fmt
* fastcgi: Add a couple adapt tests
* fastcgi: Clean up for loops
* fastcgi: Move adapt tests to separate files
