caddy/caddyconfig/httpcaddyfile/httptype.go

1349 lines
45 KiB
Go
Raw Normal View History

// Copyright 2015 Matthew Holt and The Caddy Authors
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
package httpcaddyfile
import (
"encoding/json"
"fmt"
"log"
"reflect"
"regexp"
"sort"
"strconv"
"strings"
"github.com/caddyserver/caddy/v2"
"github.com/caddyserver/caddy/v2/caddyconfig"
"github.com/caddyserver/caddy/v2/caddyconfig/caddyfile"
"github.com/caddyserver/caddy/v2/modules/caddyhttp"
"github.com/caddyserver/caddy/v2/modules/caddypki"
"github.com/caddyserver/caddy/v2/modules/caddytls"
)
func init() {
caddyconfig.RegisterAdapter("caddyfile", caddyfile.Adapter{ServerType: ServerType{}})
}
// App represents the configuration for a non-standard
// Caddy app module (e.g. third-party plugin) which was
// parsed from a global options block.
type App struct {
// The JSON key for the app being configured
Name string
// The raw app config as JSON
Value json.RawMessage
}
// ServerType can set up a config from an HTTP Caddyfile.
type ServerType struct {
}
// Setup makes a config from the tokens.
func (st ServerType) Setup(inputServerBlocks []caddyfile.ServerBlock,
options map[string]interface{}) (*caddy.Config, []caddyconfig.Warning, error) {
var warnings []caddyconfig.Warning
gc := counter{new(int)}
state := make(map[string]interface{})
// load all the server blocks and associate them with a "pile"
// of config values; also prohibit duplicate keys because they
// can make a config confusing if more than one server block is
// chosen to handle a request - we actually will make each
// server block's route terminal so that only one will run
sbKeys := make(map[string]struct{})
originalServerBlocks := make([]serverBlock, 0, len(inputServerBlocks))
for i, sblock := range inputServerBlocks {
for j, k := range sblock.Keys {
if j == 0 && strings.HasPrefix(k, "@") {
return nil, warnings, fmt.Errorf("cannot define a matcher outside of a site block: '%s'", k)
}
if _, ok := sbKeys[k]; ok {
return nil, warnings, fmt.Errorf("duplicate site address not allowed: '%s' in %v (site block %d, key %d)", k, sblock.Keys, i, j)
}
sbKeys[k] = struct{}{}
}
originalServerBlocks = append(originalServerBlocks, serverBlock{
block: sblock,
pile: make(map[string][]ConfigValue),
})
}
// apply any global options
var err error
originalServerBlocks, err = st.evaluateGlobalOptionsBlock(originalServerBlocks, options)
if err != nil {
return nil, warnings, err
}
// replace shorthand placeholders (which are
// convenient when writing a Caddyfile) with
// their actual placeholder identifiers or
// variable names
replacer := strings.NewReplacer(
"{dir}", "{http.request.uri.path.dir}",
"{file}", "{http.request.uri.path.file}",
"{host}", "{http.request.host}",
"{hostport}", "{http.request.hostport}",
"{port}", "{http.request.port}",
"{method}", "{http.request.method}",
"{path}", "{http.request.uri.path}",
"{query}", "{http.request.uri.query}",
"{remote}", "{http.request.remote}",
"{remote_host}", "{http.request.remote.host}",
"{remote_port}", "{http.request.remote.port}",
"{scheme}", "{http.request.scheme}",
"{uri}", "{http.request.uri}",
"{tls_cipher}", "{http.request.tls.cipher_suite}",
"{tls_version}", "{http.request.tls.version}",
"{tls_client_fingerprint}", "{http.request.tls.client.fingerprint}",
"{tls_client_issuer}", "{http.request.tls.client.issuer}",
"{tls_client_serial}", "{http.request.tls.client.serial}",
"{tls_client_subject}", "{http.request.tls.client.subject}",
"{tls_client_certificate_pem}", "{http.request.tls.client.certificate_pem}",
"{upstream_hostport}", "{http.reverse_proxy.upstream.hostport}",
)
// these are placeholders that allow a user-defined final
// parameters, but we still want to provide a shorthand
// for those, so we use a regexp to replace
regexpReplacements := []struct {
search *regexp.Regexp
replace string
}{
{regexp.MustCompile(`{query\.([\w-]*)}`), "{http.request.uri.query.$1}"},
{regexp.MustCompile(`{labels\.([\w-]*)}`), "{http.request.host.labels.$1}"},
{regexp.MustCompile(`{header\.([\w-]*)}`), "{http.request.header.$1}"},
{regexp.MustCompile(`{path\.([\w-]*)}`), "{http.request.uri.path.$1}"},
{regexp.MustCompile(`{re\.([\w-]*)\.([\w-]*)}`), "{http.regexp.$1.$2}"},
}
for _, sb := range originalServerBlocks {
for _, segment := range sb.block.Segments {
for i := 0; i < len(segment); i++ {
// simple string replacements
segment[i].Text = replacer.Replace(segment[i].Text)
// complex regexp replacements
for _, r := range regexpReplacements {
segment[i].Text = r.search.ReplaceAllString(segment[i].Text, r.replace)
}
}
}
if len(sb.block.Keys) == 0 {
return nil, warnings, fmt.Errorf("server block without any key is global configuration, and if used, it must be first")
}
// extract matcher definitions
matcherDefs := make(map[string]caddy.ModuleMap)
for _, segment := range sb.block.Segments {
if dir := segment.Directive(); strings.HasPrefix(dir, matcherPrefix) {
d := sb.block.DispenseDirective(dir)
err := parseMatcherDefinitions(d, matcherDefs)
if err != nil {
return nil, warnings, err
}
}
}
// evaluate each directive ("segment") in this block
for _, segment := range sb.block.Segments {
dir := segment.Directive()
if strings.HasPrefix(dir, matcherPrefix) {
// matcher definitions were pre-processed
continue
}
dirFunc, ok := registeredDirectives[dir]
if !ok {
tkn := segment[0]
return nil, warnings, fmt.Errorf("%s:%d: unrecognized directive: %s", tkn.File, tkn.Line, dir)
}
h := Helper{
Dispenser: caddyfile.NewDispenser(segment),
options: options,
warnings: &warnings,
matcherDefs: matcherDefs,
parentBlock: sb.block,
groupCounter: gc,
State: state,
}
results, err := dirFunc(h)
if err != nil {
return nil, warnings, fmt.Errorf("parsing caddyfile tokens for '%s': %v", dir, err)
}
// As a special case, we want "handle_path" to be sorted
// at the same level as "handle", so we force them to use
// the same directive name after their parsing is complete.
// See https://github.com/caddyserver/caddy/issues/3675#issuecomment-678042377
if dir == "handle_path" {
dir = "handle"
}
for _, result := range results {
result.directive = dir
sb.pile[result.Class] = append(sb.pile[result.Class], result)
}
}
}
// map
sbmap, err := st.mapAddressToServerBlocks(originalServerBlocks, options)
if err != nil {
return nil, warnings, err
}
// reduce
pairings := st.consolidateAddrMappings(sbmap)
// each pairing of listener addresses to list of server
// blocks is basically a server definition
servers, err := st.serversFromPairings(pairings, options, &warnings, gc)
if err != nil {
return nil, warnings, err
}
// now that each server is configured, make the HTTP app
httpApp := caddyhttp.App{
HTTPPort: tryInt(options["http_port"], &warnings),
HTTPSPort: tryInt(options["https_port"], &warnings),
GracePeriod: tryDuration(options["grace_period"], &warnings),
Servers: servers,
}
// then make the TLS app
tlsApp, warnings, err := st.buildTLSApp(pairings, options, warnings)
if err != nil {
return nil, warnings, err
}
// then make the PKI app
pkiApp, warnings, err := st.buildPKIApp(pairings, options, warnings)
if err != nil {
return nil, warnings, err
}
// extract any custom logs, and enforce configured levels
var customLogs []namedCustomLog
var hasDefaultLog bool
addCustomLog := func(ncl namedCustomLog) {
if ncl.name == "" {
return
}
if ncl.name == "default" {
hasDefaultLog = true
}
if _, ok := options["debug"]; ok && ncl.log.Level == "" {
ncl.log.Level = "DEBUG"
}
customLogs = append(customLogs, ncl)
}
// Apply global log options, when set
if options["log"] != nil {
for _, logValue := range options["log"].([]ConfigValue) {
addCustomLog(logValue.Value.(namedCustomLog))
}
}
// Apply server-specific log options
for _, p := range pairings {
for _, sb := range p.serverBlocks {
for _, clVal := range sb.pile["custom_log"] {
addCustomLog(clVal.Value.(namedCustomLog))
}
}
}
if !hasDefaultLog {
// if the default log was not customized, ensure we
// configure it with any applicable options
if _, ok := options["debug"]; ok {
customLogs = append(customLogs, namedCustomLog{
name: "default",
log: &caddy.CustomLog{Level: "DEBUG"},
})
}
}
// annnd the top-level config, then we're done!
cfg := &caddy.Config{AppsRaw: make(caddy.ModuleMap)}
// loop through the configured options, and if any of
// them are an httpcaddyfile App, then we insert them
// into the config as raw Caddy apps
for _, opt := range options {
if app, ok := opt.(App); ok {
cfg.AppsRaw[app.Name] = app.Value
}
}
// insert the standard Caddy apps into the config
if len(httpApp.Servers) > 0 {
cfg.AppsRaw["http"] = caddyconfig.JSON(httpApp, &warnings)
}
if !reflect.DeepEqual(tlsApp, &caddytls.TLS{CertificatesRaw: make(caddy.ModuleMap)}) {
cfg.AppsRaw["tls"] = caddyconfig.JSON(tlsApp, &warnings)
}
if !reflect.DeepEqual(pkiApp, &caddypki.PKI{CAs: make(map[string]*caddypki.CA)}) {
cfg.AppsRaw["pki"] = caddyconfig.JSON(pkiApp, &warnings)
}
if storageCvtr, ok := options["storage"].(caddy.StorageConverter); ok {
cfg.StorageRaw = caddyconfig.JSONModuleObject(storageCvtr,
"module",
storageCvtr.(caddy.Module).CaddyModule().ID.Name(),
&warnings)
}
if adminConfig, ok := options["admin"].(*caddy.AdminConfig); ok && adminConfig != nil {
cfg.Admin = adminConfig
}
if len(customLogs) > 0 {
if cfg.Logging == nil {
cfg.Logging = &caddy.Logging{
Logs: make(map[string]*caddy.CustomLog),
}
}
for _, ncl := range customLogs {
if ncl.name != "" {
cfg.Logging.Logs[ncl.name] = ncl.log
}
// most users seem to prefer not writing access logs
// to the default log when they are directed to a
// file or have any other special customization
if ncl.name != "default" && len(ncl.log.Include) > 0 {
defaultLog, ok := cfg.Logging.Logs["default"]
if !ok {
defaultLog = new(caddy.CustomLog)
cfg.Logging.Logs["default"] = defaultLog
}
defaultLog.Exclude = append(defaultLog.Exclude, ncl.log.Include...)
}
}
}
return cfg, warnings, nil
}
// evaluateGlobalOptionsBlock evaluates the global options block,
// which is expected to be the first server block if it has zero
// keys. It returns the updated list of server blocks with the
// global options block removed, and updates options accordingly.
func (ServerType) evaluateGlobalOptionsBlock(serverBlocks []serverBlock, options map[string]interface{}) ([]serverBlock, error) {
if len(serverBlocks) == 0 || len(serverBlocks[0].block.Keys) > 0 {
return serverBlocks, nil
}
for _, segment := range serverBlocks[0].block.Segments {
opt := segment.Directive()
var val interface{}
var err error
disp := caddyfile.NewDispenser(segment)
optFunc, ok := registeredGlobalOptions[opt]
if !ok {
tkn := segment[0]
return nil, fmt.Errorf("%s:%d: unrecognized global option: %s", tkn.File, tkn.Line, opt)
}
val, err = optFunc(disp, options[opt])
if err != nil {
return nil, fmt.Errorf("parsing caddyfile tokens for '%s': %v", opt, err)
}
// As a special case, fold multiple "servers" options together
// in an array instead of overwriting a possible existing value
if opt == "servers" {
existingOpts, ok := options[opt].([]serverOptions)
if !ok {
existingOpts = []serverOptions{}
}
serverOpts, ok := val.(serverOptions)
if !ok {
return nil, fmt.Errorf("unexpected type from 'servers' global options: %T", val)
}
options[opt] = append(existingOpts, serverOpts)
continue
}
// Additionally, fold multiple "log" options together into an
// array so that multiple loggers can be configured.
if opt == "log" {
existingOpts, ok := options[opt].([]ConfigValue)
if !ok {
existingOpts = []ConfigValue{}
}
logOpts, ok := val.([]ConfigValue)
if !ok {
return nil, fmt.Errorf("unexpected type from 'log' global options: %T", val)
}
options[opt] = append(existingOpts, logOpts...)
continue
}
options[opt] = val
}
// If we got "servers" options, we'll sort them by their listener address
if serverOpts, ok := options["servers"].([]serverOptions); ok {
sort.Slice(serverOpts, func(i, j int) bool {
return len(serverOpts[i].ListenerAddress) > len(serverOpts[j].ListenerAddress)
})
// Reject the config if there are duplicate listener address
seen := make(map[string]bool)
for _, entry := range serverOpts {
if _, alreadySeen := seen[entry.ListenerAddress]; alreadySeen {
return nil, fmt.Errorf("cannot have 'servers' global options with duplicate listener addresses: %s", entry.ListenerAddress)
}
seen[entry.ListenerAddress] = true
}
}
return serverBlocks[1:], nil
}
// serversFromPairings creates the servers for each pairing of addresses
// to server blocks. Each pairing is essentially a server definition.
func (st *ServerType) serversFromPairings(
pairings []sbAddrAssociation,
options map[string]interface{},
warnings *[]caddyconfig.Warning,
groupCounter counter,
) (map[string]*caddyhttp.Server, error) {
servers := make(map[string]*caddyhttp.Server)
defaultSNI := tryString(options["default_sni"], warnings)
httpPort := strconv.Itoa(caddyhttp.DefaultHTTPPort)
if hp, ok := options["http_port"].(int); ok {
httpPort = strconv.Itoa(hp)
}
httpsPort := strconv.Itoa(caddyhttp.DefaultHTTPSPort)
if hsp, ok := options["https_port"].(int); ok {
httpsPort = strconv.Itoa(hsp)
}
autoHTTPS := "on"
if ah, ok := options["auto_https"].(string); ok {
autoHTTPS = ah
}
for i, p := range pairings {
srv := &caddyhttp.Server{
Listen: p.addresses,
}
// handle the auto_https global option
if autoHTTPS != "on" {
srv.AutoHTTPS = new(caddyhttp.AutoHTTPSConfig)
if autoHTTPS == "off" {
srv.AutoHTTPS.Disabled = true
}
if autoHTTPS == "disable_redirects" {
srv.AutoHTTPS.DisableRedir = true
}
if autoHTTPS == "ignore_loaded_certs" {
srv.AutoHTTPS.IgnoreLoadedCerts = true
}
}
// sort server blocks by their keys; this is important because
// only the first matching site should be evaluated, and we should
// attempt to match most specific site first (host and path), in
// case their matchers overlap; we do this somewhat naively by
// descending sort by length of host then path
sort.SliceStable(p.serverBlocks, func(i, j int) bool {
// TODO: we could pre-process the specificities for efficiency,
// but I don't expect many blocks will have THAT many keys...
var iLongestPath, jLongestPath string
var iLongestHost, jLongestHost string
var iWildcardHost, jWildcardHost bool
for _, addr := range p.serverBlocks[i].keys {
if strings.Contains(addr.Host, "*") || addr.Host == "" {
iWildcardHost = true
}
if specificity(addr.Host) > specificity(iLongestHost) {
iLongestHost = addr.Host
}
if specificity(addr.Path) > specificity(iLongestPath) {
iLongestPath = addr.Path
}
}
for _, addr := range p.serverBlocks[j].keys {
if strings.Contains(addr.Host, "*") || addr.Host == "" {
jWildcardHost = true
}
if specificity(addr.Host) > specificity(jLongestHost) {
jLongestHost = addr.Host
}
if specificity(addr.Path) > specificity(jLongestPath) {
jLongestPath = addr.Path
}
}
// catch-all blocks (blocks with no hostname) should always go
// last, even after blocks with wildcard hosts
if specificity(iLongestHost) == 0 {
return false
}
if specificity(jLongestHost) == 0 {
return true
}
if iWildcardHost != jWildcardHost {
// site blocks that have a key with a wildcard in the hostname
// must always be less specific than blocks without one; see
// https://github.com/caddyserver/caddy/issues/3410
return jWildcardHost && !iWildcardHost
}
if specificity(iLongestHost) == specificity(jLongestHost) {
return len(iLongestPath) > len(jLongestPath)
}
return specificity(iLongestHost) > specificity(jLongestHost)
})
var hasCatchAllTLSConnPolicy, addressQualifiesForTLS bool
autoHTTPSWillAddConnPolicy := autoHTTPS != "off"
// if a catch-all server block (one which accepts all hostnames) exists in this pairing,
// we need to know that so that we can configure logs properly (see #3878)
var catchAllSblockExists bool
for _, sblock := range p.serverBlocks {
if len(sblock.hostsFromKeys(false)) == 0 {
catchAllSblockExists = true
}
}
// if needed, the ServerLogConfig is initialized beforehand so
// that all server blocks can populate it with data, even when not
// coming with a log directive
for _, sblock := range p.serverBlocks {
if len(sblock.pile["custom_log"]) != 0 {
srv.Logs = new(caddyhttp.ServerLogConfig)
break
}
}
// create a subroute for each site in the server block
for _, sblock := range p.serverBlocks {
matcherSetsEnc, err := st.compileEncodedMatcherSets(sblock)
if err != nil {
return nil, fmt.Errorf("server block %v: compiling matcher sets: %v", sblock.block.Keys, err)
}
hosts := sblock.hostsFromKeys(false)
// emit warnings if user put unspecified IP addresses; they probably want the bind directive
for _, h := range hosts {
if h == "0.0.0.0" || h == "::" {
log.Printf("[WARNING] Site block has unspecified IP address %s which only matches requests having that Host header; you probably want the 'bind' directive to configure the socket", h)
}
}
// tls: connection policies
if cpVals, ok := sblock.pile["tls.connection_policy"]; ok {
// tls connection policies
for _, cpVal := range cpVals {
cp := cpVal.Value.(*caddytls.ConnectionPolicy)
// make sure the policy covers all hostnames from the block
for _, h := range hosts {
if h == defaultSNI {
hosts = append(hosts, "")
cp.DefaultSNI = defaultSNI
break
}
}
if len(hosts) > 0 {
cp.MatchersRaw = caddy.ModuleMap{
"sni": caddyconfig.JSON(hosts, warnings), // make sure to match all hosts, not just auto-HTTPS-qualified ones
}
} else {
cp.DefaultSNI = defaultSNI
}
// only append this policy if it actually changes something
if !cp.SettingsEmpty() {
srv.TLSConnPolicies = append(srv.TLSConnPolicies, cp)
hasCatchAllTLSConnPolicy = len(hosts) == 0
}
}
}
for _, addr := range sblock.keys {
// if server only uses HTTPS port, auto-HTTPS will not apply
if listenersUseAnyPortOtherThan(srv.Listen, httpPort) {
// exclude any hosts that were defined explicitly with "http://"
// in the key from automated cert management (issue #2998)
if addr.Scheme == "http" && addr.Host != "" {
if srv.AutoHTTPS == nil {
srv.AutoHTTPS = new(caddyhttp.AutoHTTPSConfig)
}
if !sliceContains(srv.AutoHTTPS.Skip, addr.Host) {
srv.AutoHTTPS.Skip = append(srv.AutoHTTPS.Skip, addr.Host)
}
}
}
// we'll need to remember if the address qualifies for auto-HTTPS, so we
// can add a TLS conn policy if necessary
if addr.Scheme == "https" ||
(addr.Scheme != "http" && addr.Host != "" && addr.Port != httpPort) {
addressQualifiesForTLS = true
}
// predict whether auto-HTTPS will add the conn policy for us; if so, we
// may not need to add one for this server
autoHTTPSWillAddConnPolicy = autoHTTPSWillAddConnPolicy &&
(addr.Port == httpsPort || (addr.Port != httpPort && addr.Host != ""))
}
// Look for any config values that provide listener wrappers on the server block
for _, listenerConfig := range sblock.pile["listener_wrapper"] {
listenerWrapper, ok := listenerConfig.Value.(caddy.ListenerWrapper)
if !ok {
return nil, fmt.Errorf("config for a listener wrapper did not provide a value that implements caddy.ListenerWrapper")
}
jsonListenerWrapper := caddyconfig.JSONModuleObject(
listenerWrapper,
"wrapper",
listenerWrapper.(caddy.Module).CaddyModule().ID.Name(),
warnings)
srv.ListenerWrappersRaw = append(srv.ListenerWrappersRaw, jsonListenerWrapper)
}
// set up each handler directive, making sure to honor directive order
dirRoutes := sblock.pile["route"]
siteSubroute, err := buildSubroute(dirRoutes, groupCounter)
if err != nil {
return nil, err
}
// add the site block's route(s) to the server
srv.Routes = appendSubrouteToRouteList(srv.Routes, siteSubroute, matcherSetsEnc, p, warnings)
// if error routes are defined, add those too
if errorSubrouteVals, ok := sblock.pile["error_route"]; ok {
if srv.Errors == nil {
srv.Errors = new(caddyhttp.HTTPErrorConfig)
}
for _, val := range errorSubrouteVals {
sr := val.Value.(*caddyhttp.Subroute)
srv.Errors.Routes = appendSubrouteToRouteList(srv.Errors.Routes, sr, matcherSetsEnc, p, warnings)
}
}
// add log associations
// see https://github.com/caddyserver/caddy/issues/3310
sblockLogHosts := sblock.hostsFromKeys(true)
for _, cval := range sblock.pile["custom_log"] {
ncl := cval.Value.(namedCustomLog)
if sblock.hasHostCatchAllKey() {
// all requests for hosts not able to be listed should use
// this log because it's a catch-all-hosts server block
srv.Logs.DefaultLoggerName = ncl.name
} else {
// map each host to the user's desired logger name
for _, h := range sblockLogHosts {
// if the custom logger name is non-empty, add it to the map;
// otherwise, only map to an empty logger name if this or
// another site block on this server has a catch-all host (in
// which case only requests with mapped hostnames will be
// access-logged, so it'll be necessary to add them to the
// map even if they use default logger)
if ncl.name != "" || catchAllSblockExists {
if srv.Logs.LoggerNames == nil {
srv.Logs.LoggerNames = make(map[string]string)
}
srv.Logs.LoggerNames[h] = ncl.name
}
}
}
}
if srv.Logs != nil && len(sblock.pile["custom_log"]) == 0 {
// server has access logs enabled, but this server block does not
// enable access logs; therefore, all hosts of this server block
// should not be access-logged
if len(hosts) == 0 {
// if the server block has a catch-all-hosts key, then we should
// not log reqs to any host unless it appears in the map
srv.Logs.SkipUnmappedHosts = true
}
srv.Logs.SkipHosts = append(srv.Logs.SkipHosts, sblockLogHosts...)
}
}
// a server cannot (natively) serve both HTTP and HTTPS at the
// same time, so make sure the configuration isn't in conflict
err := detectConflictingSchemes(srv, p.serverBlocks, options)
if err != nil {
return nil, err
}
// a catch-all TLS conn policy is necessary to ensure TLS can
// be offered to all hostnames of the server; even though only
// one policy is needed to enable TLS for the server, that
// policy might apply to only certain TLS handshakes; but when
// using the Caddyfile, user would expect all handshakes to at
// least have a matching connection policy, so here we append a
// catch-all/default policy if there isn't one already (it's
// important that it goes at the end) - see issue #3004:
// https://github.com/caddyserver/caddy/issues/3004
// TODO: maybe a smarter way to handle this might be to just make the
// auto-HTTPS logic at provision-time detect if there is any connection
// policy missing for any HTTPS-enabled hosts, if so, add it... maybe?
if addressQualifiesForTLS &&
!hasCatchAllTLSConnPolicy &&
(len(srv.TLSConnPolicies) > 0 || !autoHTTPSWillAddConnPolicy || defaultSNI != "") {
srv.TLSConnPolicies = append(srv.TLSConnPolicies, &caddytls.ConnectionPolicy{DefaultSNI: defaultSNI})
}
// tidy things up a bit
caddytls: Refactor certificate selection policies (close #1575) Certificate selection used to be a module, but this seems unnecessary, especially since the built-in CustomSelectionPolicy allows quite complex selection logic on a number of fields in certs. If we need to extend that logic, we can, but I don't think there are SO many possibilities that we need modules. This update also allows certificate selection to choose between multiple matching certs based on client compatibility and makes a number of other improvements in the default cert selection logic, both here and in the latest CertMagic. The hardest part of this was the conn policy consolidation logic (Caddyfile only, of course). We have to merge connection policies that we can easily combine, because if two certs are manually loaded in a Caddyfile site block, that produces two connection policies, and each cert is tagged with a different tag, meaning only the first would ever be selected. So given the same matchers, we can merge the two, but this required improving the Tag selection logic to support multiple tags to choose from, hence "tags" changed to "any_tag" or "all_tags" (but we use any_tag in our Caddyfile logic). Combining conn policies with conflicting settings is impossible, so that should return an error if two policies with the exact same matchers have non-empty settings that are not the same (the one exception being any_tag which we can merge because the logic for them is to OR them). It was a bit complicated. It seems to work in numerous tests I've conducted, but we'll see how it pans out in the release candidates.
2020-04-02 05:49:35 +03:00
srv.TLSConnPolicies, err = consolidateConnPolicies(srv.TLSConnPolicies)
if err != nil {
return nil, fmt.Errorf("consolidating TLS connection policies for server %d: %v", i, err)
}
srv.Routes = consolidateRoutes(srv.Routes)
servers[fmt.Sprintf("srv%d", i)] = srv
}
err := applyServerOptions(servers, options, warnings)
if err != nil {
return nil, err
}
return servers, nil
}
func detectConflictingSchemes(srv *caddyhttp.Server, serverBlocks []serverBlock, options map[string]interface{}) error {
httpPort := strconv.Itoa(caddyhttp.DefaultHTTPPort)
if hp, ok := options["http_port"].(int); ok {
httpPort = strconv.Itoa(hp)
}
httpsPort := strconv.Itoa(caddyhttp.DefaultHTTPSPort)
if hsp, ok := options["https_port"].(int); ok {
httpsPort = strconv.Itoa(hsp)
}
var httpOrHTTPS string
checkAndSetHTTP := func(addr Address) error {
if httpOrHTTPS == "HTTPS" {
errMsg := fmt.Errorf("server listening on %v is configured for HTTPS and cannot natively multiplex HTTP and HTTPS: %s",
srv.Listen, addr.Original)
if addr.Scheme == "" && addr.Host == "" {
errMsg = fmt.Errorf("%s (try specifying https:// in the address)", errMsg)
}
return errMsg
}
if len(srv.TLSConnPolicies) > 0 {
// any connection policies created for an HTTP server
// is a logical conflict, as it would enable HTTPS
return fmt.Errorf("server listening on %v is HTTP, but attempts to configure TLS connection policies", srv.Listen)
}
httpOrHTTPS = "HTTP"
return nil
}
checkAndSetHTTPS := func(addr Address) error {
if httpOrHTTPS == "HTTP" {
return fmt.Errorf("server listening on %v is configured for HTTP and cannot natively multiplex HTTP and HTTPS: %s",
srv.Listen, addr.Original)
}
httpOrHTTPS = "HTTPS"
return nil
}
for _, sblock := range serverBlocks {
for _, addr := range sblock.keys {
if addr.Scheme == "http" || addr.Port == httpPort {
if err := checkAndSetHTTP(addr); err != nil {
return err
}
} else if addr.Scheme == "https" || addr.Port == httpsPort || len(srv.TLSConnPolicies) > 0 {
if err := checkAndSetHTTPS(addr); err != nil {
return err
}
} else if addr.Host == "" {
if err := checkAndSetHTTP(addr); err != nil {
return err
}
}
}
}
return nil
}
// consolidateConnPolicies sorts any catch-all policy to the end, removes empty TLS connection
// policies, and combines equivalent ones for a cleaner overall output.
caddytls: Refactor certificate selection policies (close #1575) Certificate selection used to be a module, but this seems unnecessary, especially since the built-in CustomSelectionPolicy allows quite complex selection logic on a number of fields in certs. If we need to extend that logic, we can, but I don't think there are SO many possibilities that we need modules. This update also allows certificate selection to choose between multiple matching certs based on client compatibility and makes a number of other improvements in the default cert selection logic, both here and in the latest CertMagic. The hardest part of this was the conn policy consolidation logic (Caddyfile only, of course). We have to merge connection policies that we can easily combine, because if two certs are manually loaded in a Caddyfile site block, that produces two connection policies, and each cert is tagged with a different tag, meaning only the first would ever be selected. So given the same matchers, we can merge the two, but this required improving the Tag selection logic to support multiple tags to choose from, hence "tags" changed to "any_tag" or "all_tags" (but we use any_tag in our Caddyfile logic). Combining conn policies with conflicting settings is impossible, so that should return an error if two policies with the exact same matchers have non-empty settings that are not the same (the one exception being any_tag which we can merge because the logic for them is to OR them). It was a bit complicated. It seems to work in numerous tests I've conducted, but we'll see how it pans out in the release candidates.
2020-04-02 05:49:35 +03:00
func consolidateConnPolicies(cps caddytls.ConnectionPolicies) (caddytls.ConnectionPolicies, error) {
// catch-all policies (those without any matcher) should be at the
// end, otherwise it nullifies any more specific policies
sort.SliceStable(cps, func(i, j int) bool {
return cps[j].MatchersRaw == nil && cps[i].MatchersRaw != nil
})
for i := 0; i < len(cps); i++ {
// compare it to the others
for j := 0; j < len(cps); j++ {
if j == i {
continue
}
// if they're exactly equal in every way, just keep one of them
if reflect.DeepEqual(cps[i], cps[j]) {
cps = append(cps[:j], cps[j+1:]...)
i--
break
}
caddytls: Refactor certificate selection policies (close #1575) Certificate selection used to be a module, but this seems unnecessary, especially since the built-in CustomSelectionPolicy allows quite complex selection logic on a number of fields in certs. If we need to extend that logic, we can, but I don't think there are SO many possibilities that we need modules. This update also allows certificate selection to choose between multiple matching certs based on client compatibility and makes a number of other improvements in the default cert selection logic, both here and in the latest CertMagic. The hardest part of this was the conn policy consolidation logic (Caddyfile only, of course). We have to merge connection policies that we can easily combine, because if two certs are manually loaded in a Caddyfile site block, that produces two connection policies, and each cert is tagged with a different tag, meaning only the first would ever be selected. So given the same matchers, we can merge the two, but this required improving the Tag selection logic to support multiple tags to choose from, hence "tags" changed to "any_tag" or "all_tags" (but we use any_tag in our Caddyfile logic). Combining conn policies with conflicting settings is impossible, so that should return an error if two policies with the exact same matchers have non-empty settings that are not the same (the one exception being any_tag which we can merge because the logic for them is to OR them). It was a bit complicated. It seems to work in numerous tests I've conducted, but we'll see how it pans out in the release candidates.
2020-04-02 05:49:35 +03:00
// if they have the same matcher, try to reconcile each field: either they must
// be identical, or we have to be able to combine them safely
if reflect.DeepEqual(cps[i].MatchersRaw, cps[j].MatchersRaw) {
if len(cps[i].ALPN) > 0 &&
len(cps[j].ALPN) > 0 &&
!reflect.DeepEqual(cps[i].ALPN, cps[j].ALPN) {
return nil, fmt.Errorf("two policies with same match criteria have conflicting ALPN: %v vs. %v",
cps[i].ALPN, cps[j].ALPN)
}
if len(cps[i].CipherSuites) > 0 &&
len(cps[j].CipherSuites) > 0 &&
!reflect.DeepEqual(cps[i].CipherSuites, cps[j].CipherSuites) {
return nil, fmt.Errorf("two policies with same match criteria have conflicting cipher suites: %v vs. %v",
cps[i].CipherSuites, cps[j].CipherSuites)
}
if cps[i].ClientAuthentication == nil &&
cps[j].ClientAuthentication != nil &&
!reflect.DeepEqual(cps[i].ClientAuthentication, cps[j].ClientAuthentication) {
return nil, fmt.Errorf("two policies with same match criteria have conflicting client auth configuration: %+v vs. %+v",
cps[i].ClientAuthentication, cps[j].ClientAuthentication)
}
if len(cps[i].Curves) > 0 &&
len(cps[j].Curves) > 0 &&
!reflect.DeepEqual(cps[i].Curves, cps[j].Curves) {
return nil, fmt.Errorf("two policies with same match criteria have conflicting curves: %v vs. %v",
cps[i].Curves, cps[j].Curves)
}
if cps[i].DefaultSNI != "" &&
cps[j].DefaultSNI != "" &&
cps[i].DefaultSNI != cps[j].DefaultSNI {
return nil, fmt.Errorf("two policies with same match criteria have conflicting default SNI: %s vs. %s",
cps[i].DefaultSNI, cps[j].DefaultSNI)
}
if cps[i].ProtocolMin != "" &&
cps[j].ProtocolMin != "" &&
cps[i].ProtocolMin != cps[j].ProtocolMin {
return nil, fmt.Errorf("two policies with same match criteria have conflicting min protocol: %s vs. %s",
cps[i].ProtocolMin, cps[j].ProtocolMin)
}
if cps[i].ProtocolMax != "" &&
cps[j].ProtocolMax != "" &&
cps[i].ProtocolMax != cps[j].ProtocolMax {
return nil, fmt.Errorf("two policies with same match criteria have conflicting max protocol: %s vs. %s",
cps[i].ProtocolMax, cps[j].ProtocolMax)
}
if cps[i].CertSelection != nil && cps[j].CertSelection != nil {
// merging fields other than AnyTag is not implemented
if !reflect.DeepEqual(cps[i].CertSelection.SerialNumber, cps[j].CertSelection.SerialNumber) ||
!reflect.DeepEqual(cps[i].CertSelection.SubjectOrganization, cps[j].CertSelection.SubjectOrganization) ||
cps[i].CertSelection.PublicKeyAlgorithm != cps[j].CertSelection.PublicKeyAlgorithm ||
!reflect.DeepEqual(cps[i].CertSelection.AllTags, cps[j].CertSelection.AllTags) {
return nil, fmt.Errorf("two policies with same match criteria have conflicting cert selections: %+v vs. %+v",
cps[i].CertSelection, cps[j].CertSelection)
}
}
// by now we've decided that we can merge the two -- we'll keep i and drop j
if len(cps[i].ALPN) == 0 && len(cps[j].ALPN) > 0 {
cps[i].ALPN = cps[j].ALPN
}
if len(cps[i].CipherSuites) == 0 && len(cps[j].CipherSuites) > 0 {
cps[i].CipherSuites = cps[j].CipherSuites
}
if cps[i].ClientAuthentication == nil && cps[j].ClientAuthentication != nil {
cps[i].ClientAuthentication = cps[j].ClientAuthentication
}
if len(cps[i].Curves) == 0 && len(cps[j].Curves) > 0 {
cps[i].Curves = cps[j].Curves
}
if cps[i].DefaultSNI == "" && cps[j].DefaultSNI != "" {
cps[i].DefaultSNI = cps[j].DefaultSNI
}
if cps[i].ProtocolMin == "" && cps[j].ProtocolMin != "" {
cps[i].ProtocolMin = cps[j].ProtocolMin
}
if cps[i].ProtocolMax == "" && cps[j].ProtocolMax != "" {
cps[i].ProtocolMax = cps[j].ProtocolMax
}
if cps[i].CertSelection == nil && cps[j].CertSelection != nil {
// if j is the only one with a policy, move it over to i
cps[i].CertSelection = cps[j].CertSelection
} else if cps[i].CertSelection != nil && cps[j].CertSelection != nil {
// if both have one, then combine AnyTag
for _, tag := range cps[j].CertSelection.AnyTag {
if !sliceContains(cps[i].CertSelection.AnyTag, tag) {
cps[i].CertSelection.AnyTag = append(cps[i].CertSelection.AnyTag, tag)
}
}
}
cps = append(cps[:j], cps[j+1:]...)
i--
break
}
}
}
caddytls: Refactor certificate selection policies (close #1575) Certificate selection used to be a module, but this seems unnecessary, especially since the built-in CustomSelectionPolicy allows quite complex selection logic on a number of fields in certs. If we need to extend that logic, we can, but I don't think there are SO many possibilities that we need modules. This update also allows certificate selection to choose between multiple matching certs based on client compatibility and makes a number of other improvements in the default cert selection logic, both here and in the latest CertMagic. The hardest part of this was the conn policy consolidation logic (Caddyfile only, of course). We have to merge connection policies that we can easily combine, because if two certs are manually loaded in a Caddyfile site block, that produces two connection policies, and each cert is tagged with a different tag, meaning only the first would ever be selected. So given the same matchers, we can merge the two, but this required improving the Tag selection logic to support multiple tags to choose from, hence "tags" changed to "any_tag" or "all_tags" (but we use any_tag in our Caddyfile logic). Combining conn policies with conflicting settings is impossible, so that should return an error if two policies with the exact same matchers have non-empty settings that are not the same (the one exception being any_tag which we can merge because the logic for them is to OR them). It was a bit complicated. It seems to work in numerous tests I've conducted, but we'll see how it pans out in the release candidates.
2020-04-02 05:49:35 +03:00
return cps, nil
}
// appendSubrouteToRouteList appends the routes in subroute
// to the routeList, optionally qualified by matchers.
func appendSubrouteToRouteList(routeList caddyhttp.RouteList,
subroute *caddyhttp.Subroute,
matcherSetsEnc []caddy.ModuleMap,
p sbAddrAssociation,
warnings *[]caddyconfig.Warning) caddyhttp.RouteList {
// nothing to do if... there's nothing to do
if len(matcherSetsEnc) == 0 && len(subroute.Routes) == 0 && subroute.Errors == nil {
return routeList
}
if len(matcherSetsEnc) == 0 && len(p.serverBlocks) == 1 {
// no need to wrap the handlers in a subroute if this is
// the only server block and there is no matcher for it
routeList = append(routeList, subroute.Routes...)
} else {
route := caddyhttp.Route{
// the semantics of a site block in the Caddyfile dictate
// that only the first matching one is evaluated, since
// site blocks do not cascade nor inherit
Terminal: true,
}
if len(matcherSetsEnc) > 0 {
route.MatcherSetsRaw = matcherSetsEnc
}
if len(subroute.Routes) > 0 || subroute.Errors != nil {
route.HandlersRaw = []json.RawMessage{
caddyconfig.JSONModuleObject(subroute, "handler", "subroute", warnings),
}
}
if len(route.MatcherSetsRaw) > 0 || len(route.HandlersRaw) > 0 {
routeList = append(routeList, route)
}
}
return routeList
}
// buildSubroute turns the config values, which are expected to be routes
// into a clean and orderly subroute that has all the routes within it.
func buildSubroute(routes []ConfigValue, groupCounter counter) (*caddyhttp.Subroute, error) {
for _, val := range routes {
if !directiveIsOrdered(val.directive) {
return nil, fmt.Errorf("directive '%s' is not ordered, so it cannot be used here", val.directive)
}
}
sortRoutes(routes)
subroute := new(caddyhttp.Subroute)
// some directives are mutually exclusive (only first matching
// instance should be evaluated); this is done by putting their
// routes in the same group
mutuallyExclusiveDirs := map[string]*struct {
count int
groupName string
}{
// as a special case, group rewrite directives so that they are mutually exclusive;
// this means that only the first matching rewrite will be evaluated, and that's
// probably a good thing, since there should never be a need to do more than one
// rewrite (I think?), and cascading rewrites smell bad... imagine these rewrites:
// rewrite /docs/json/* /docs/json/index.html
// rewrite /docs/* /docs/index.html
// (We use this on the Caddy website, or at least we did once.) The first rewrite's
// result is also matched by the second rewrite, making the first rewrite pointless.
// See issue #2959.
"rewrite": {},
// handle blocks are also mutually exclusive by definition
"handle": {},
// root just sets a variable, so if it was not mutually exclusive, intersecting
// root directives would overwrite previously-matched ones; they should not cascade
"root": {},
}
// we need to deterministically loop over each of these directives
// in order to keep the group numbers consistent
keys := make([]string, 0, len(mutuallyExclusiveDirs))
for k := range mutuallyExclusiveDirs {
keys = append(keys, k)
}
sort.Strings(keys)
for _, meDir := range keys {
info := mutuallyExclusiveDirs[meDir]
// see how many instances of the directive there are
for _, r := range routes {
if r.directive == meDir {
info.count++
if info.count > 1 {
break
}
}
}
// if there is more than one, put them in a group
// (special case: "rewrite" directive must always be in
// its own group--even if there is only one--because we
// do not want a rewrite to be consolidated into other
// adjacent routes that happen to have the same matcher,
// see caddyserver/caddy#3108 - because the implied
// intent of rewrite is to do an internal redirect,
// we can't assume that the request will continue to
// match the same matcher; anyway, giving a route a
// unique group name should keep it from consolidating)
if info.count > 1 || meDir == "rewrite" {
info.groupName = groupCounter.nextGroup()
}
}
// add all the routes piled in from directives
for _, r := range routes {
// put this route into a group if it is mutually exclusive
if info, ok := mutuallyExclusiveDirs[r.directive]; ok {
route := r.Value.(caddyhttp.Route)
route.Group = info.groupName
r.Value = route
}
switch route := r.Value.(type) {
case caddyhttp.Subroute:
// if a route-class config value is actually a Subroute handler
// with nothing but a list of routes, then it is the intention
// of the directive to keep these handlers together and in this
// same order, but not necessarily in a subroute (if it wanted
// to keep them in a subroute, the directive would have returned
// a route with a Subroute as its handler); this is useful to
// keep multiple handlers/routes together and in the same order
// so that the sorting procedure we did above doesn't reorder them
if route.Errors != nil {
// if error handlers are also set, this is confusing; it's
// probably supposed to be wrapped in a Route and encoded
// as a regular handler route... programmer error.
panic("found subroute with more than just routes; perhaps it should have been wrapped in a route?")
}
subroute.Routes = append(subroute.Routes, route.Routes...)
case caddyhttp.Route:
subroute.Routes = append(subroute.Routes, route)
}
}
subroute.Routes = consolidateRoutes(subroute.Routes)
return subroute, nil
}
// consolidateRoutes combines routes with the same properties
// (same matchers, same Terminal and Group settings) for a
// cleaner overall output.
func consolidateRoutes(routes caddyhttp.RouteList) caddyhttp.RouteList {
for i := 0; i < len(routes)-1; i++ {
if reflect.DeepEqual(routes[i].MatcherSetsRaw, routes[i+1].MatcherSetsRaw) &&
routes[i].Terminal == routes[i+1].Terminal &&
routes[i].Group == routes[i+1].Group {
// keep the handlers in the same order, then splice out repetitive route
routes[i].HandlersRaw = append(routes[i].HandlersRaw, routes[i+1].HandlersRaw...)
routes = append(routes[:i+1], routes[i+2:]...)
i--
}
}
return routes
}
func matcherSetFromMatcherToken(
tkn caddyfile.Token,
matcherDefs map[string]caddy.ModuleMap,
warnings *[]caddyconfig.Warning,
) (caddy.ModuleMap, bool, error) {
// matcher tokens can be wildcards, simple path matchers,
// or refer to a pre-defined matcher by some name
if tkn.Text == "*" {
// match all requests == no matchers, so nothing to do
return nil, true, nil
} else if strings.HasPrefix(tkn.Text, "/") {
// convenient way to specify a single path match
return caddy.ModuleMap{
"path": caddyconfig.JSON(caddyhttp.MatchPath{tkn.Text}, warnings),
}, true, nil
} else if strings.HasPrefix(tkn.Text, matcherPrefix) {
// pre-defined matcher
m, ok := matcherDefs[tkn.Text]
if !ok {
return nil, false, fmt.Errorf("unrecognized matcher name: %+v", tkn.Text)
}
return m, true, nil
}
return nil, false, nil
}
func (st *ServerType) compileEncodedMatcherSets(sblock serverBlock) ([]caddy.ModuleMap, error) {
type hostPathPair struct {
hostm caddyhttp.MatchHost
pathm caddyhttp.MatchPath
}
// keep routes with common host and path matchers together
var matcherPairs []*hostPathPair
var catchAllHosts bool
for _, addr := range sblock.keys {
// choose a matcher pair that should be shared by this
// server block; if none exists yet, create one
var chosenMatcherPair *hostPathPair
for _, mp := range matcherPairs {
if (len(mp.pathm) == 0 && addr.Path == "") ||
(len(mp.pathm) == 1 && mp.pathm[0] == addr.Path) {
chosenMatcherPair = mp
break
}
}
if chosenMatcherPair == nil {
chosenMatcherPair = new(hostPathPair)
if addr.Path != "" {
chosenMatcherPair.pathm = []string{addr.Path}
}
matcherPairs = append(matcherPairs, chosenMatcherPair)
}
// if one of the keys has no host (i.e. is a catch-all for
// any hostname), then we need to null out the host matcher
// entirely so that it matches all hosts
if addr.Host == "" && !catchAllHosts {
chosenMatcherPair.hostm = nil
catchAllHosts = true
}
if catchAllHosts {
continue
}
// add this server block's keys to the matcher
// pair if it doesn't already exist
if addr.Host != "" {
var found bool
for _, h := range chosenMatcherPair.hostm {
if h == addr.Host {
found = true
break
}
}
if !found {
chosenMatcherPair.hostm = append(chosenMatcherPair.hostm, addr.Host)
}
}
}
// iterate each pairing of host and path matchers and
// put them into a map for JSON encoding
var matcherSets []map[string]caddyhttp.RequestMatcher
for _, mp := range matcherPairs {
matcherSet := make(map[string]caddyhttp.RequestMatcher)
if len(mp.hostm) > 0 {
matcherSet["host"] = mp.hostm
}
if len(mp.pathm) > 0 {
matcherSet["path"] = mp.pathm
}
if len(matcherSet) > 0 {
matcherSets = append(matcherSets, matcherSet)
}
}
// finally, encode each of the matcher sets
matcherSetsEnc := make([]caddy.ModuleMap, 0, len(matcherSets))
for _, ms := range matcherSets {
msEncoded, err := encodeMatcherSet(ms)
if err != nil {
return nil, fmt.Errorf("server block %v: %v", sblock.block.Keys, err)
}
matcherSetsEnc = append(matcherSetsEnc, msEncoded)
}
return matcherSetsEnc, nil
}
func parseMatcherDefinitions(d *caddyfile.Dispenser, matchers map[string]caddy.ModuleMap) error {
for d.Next() {
definitionName := d.Val()
if _, ok := matchers[definitionName]; ok {
return fmt.Errorf("matcher is defined more than once: %s", definitionName)
}
matchers[definitionName] = make(caddy.ModuleMap)
// in case there are multiple instances of the same matcher, concatenate
// their tokens (we expect that UnmarshalCaddyfile should be able to
// handle more than one segment); otherwise, we'd overwrite other
// instances of the matcher in this set
tokensByMatcherName := make(map[string][]caddyfile.Token)
for nesting := d.Nesting(); d.NextArg() || d.NextBlock(nesting); {
matcherName := d.Val()
tokensByMatcherName[matcherName] = append(tokensByMatcherName[matcherName], d.NextSegment()...)
}
for matcherName, tokens := range tokensByMatcherName {
mod, err := caddy.GetModule("http.matchers." + matcherName)
if err != nil {
return fmt.Errorf("getting matcher module '%s': %v", matcherName, err)
}
unm, ok := mod.New().(caddyfile.Unmarshaler)
if !ok {
return fmt.Errorf("matcher module '%s' is not a Caddyfile unmarshaler", matcherName)
}
err = unm.UnmarshalCaddyfile(caddyfile.NewDispenser(tokens))
if err != nil {
return err
}
rm, ok := unm.(caddyhttp.RequestMatcher)
if !ok {
return fmt.Errorf("matcher module '%s' is not a request matcher", matcherName)
}
matchers[definitionName][matcherName] = caddyconfig.JSON(rm, nil)
}
}
return nil
}
func encodeMatcherSet(matchers map[string]caddyhttp.RequestMatcher) (caddy.ModuleMap, error) {
msEncoded := make(caddy.ModuleMap)
for matcherName, val := range matchers {
jsonBytes, err := json.Marshal(val)
if err != nil {
return nil, fmt.Errorf("marshaling matcher set %#v: %v", matchers, err)
}
msEncoded[matcherName] = jsonBytes
}
return msEncoded, nil
}
// tryInt tries to convert val to an integer. If it fails,
// it downgrades the error to a warning and returns 0.
func tryInt(val interface{}, warnings *[]caddyconfig.Warning) int {
intVal, ok := val.(int)
if val != nil && !ok && warnings != nil {
*warnings = append(*warnings, caddyconfig.Warning{Message: "not an integer type"})
}
return intVal
}
func tryString(val interface{}, warnings *[]caddyconfig.Warning) string {
stringVal, ok := val.(string)
if val != nil && !ok && warnings != nil {
*warnings = append(*warnings, caddyconfig.Warning{Message: "not a string type"})
}
return stringVal
}
func tryDuration(val interface{}, warnings *[]caddyconfig.Warning) caddy.Duration {
durationVal, ok := val.(caddy.Duration)
if val != nil && !ok && warnings != nil {
*warnings = append(*warnings, caddyconfig.Warning{Message: "not a duration type"})
}
return durationVal
}
// sliceContains returns true if needle is in haystack.
func sliceContains(haystack []string, needle string) bool {
for _, s := range haystack {
if s == needle {
return true
}
}
return false
}
// listenersUseAnyPortOtherThan returns true if there are any
// listeners in addresses that use a port which is not otherPort.
// Mostly borrowed from unexported method in caddyhttp package.
func listenersUseAnyPortOtherThan(addresses []string, otherPort string) bool {
otherPortInt, err := strconv.Atoi(otherPort)
if err != nil {
return false
}
for _, lnAddr := range addresses {
laddrs, err := caddy.ParseNetworkAddress(lnAddr)
if err != nil {
continue
}
if uint(otherPortInt) > laddrs.EndPort || uint(otherPortInt) < laddrs.StartPort {
return true
}
}
return false
}
// specificity returns len(s) minus any wildcards (*) and
// placeholders ({...}). Basically, it's a length count
// that penalizes the use of wildcards and placeholders.
// This is useful for comparing hostnames and paths.
// However, wildcards in paths are not a sure answer to
// the question of specificity. For example,
// '*.example.com' is clearly less specific than
// 'a.example.com', but is '/a' more or less specific
// than '/a*'?
func specificity(s string) int {
l := len(s) - strings.Count(s, "*")
for len(s) > 0 {
start := strings.Index(s, "{")
if start < 0 {
return l
}
end := strings.Index(s[start:], "}") + start + 1
if end <= start {
return l
}
l -= end - start
s = s[end:]
}
return l
}
type counter struct {
n *int
}
func (c counter) nextGroup() string {
name := fmt.Sprintf("group%d", *c.n)
*c.n++
return name
}
type namedCustomLog struct {
name string
log *caddy.CustomLog
}
// sbAddrAssociation is a mapping from a list of
// addresses to a list of server blocks that are
// served on those addresses.
type sbAddrAssociation struct {
addresses []string
serverBlocks []serverBlock
}
const matcherPrefix = "@"
// Interface guard
var _ caddyfile.ServerType = (*ServerType)(nil)